750008
42
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
42 –MACHINE MAINTENANCE
Irregular Stitches
Possible Cause: Stitches are not balanced.
Solution: Adjust thread tensions and possibly cutting width (page 26, 27)
Possible Cause: Thread is not unreeling smoothly off the thread spool.
Solution: Check the thread spool to ensure thread is not getting caught.
Possible Cause: Machine may not be threaded correctly or threads threaded in the incorrect sequence.
Solution: Check that machine is threaded in correct order as shown in machine manual (page 12)
Fabric Jams
Possible Cause: Upper and lower fabric cutters are not in proper position.
Solution: Check alignment of cutters (page 26).
Possible Cause: Thread is not unreeling smoothly off the thread spool.
Solution: Check the thread spool to ensure thread is not getting caught.
Possible Cause: Too much fabric thickness.
Solution:Compress thick layers with conventional sewing machine before sewing on overlock.
The Looper Threader does not Work
Possible Cause: The Threading/Sewing switch is not set to the “Threading” position.
Solution: Set the Threading/Sewing switch to threading position (page 15, 17).
Possible Cause: The looper selection lever is not set correctly.
Solution: Make sure the looper selection lever is pointing to the correct looper (page 15, 17).
Possible Cause: The thread is not correctly inserted into the looper threader hole.
Solution:Insert at least 2cm of thread into the looper hole (page 15, 17).
Possible Cause: The thread is not long enough.
Solution:Pull out approximately 12” (30 cm) of thread before putting it in the looper threading hole (page 15, 17).
Possible Cause: The thread is tangled, wet or frayed.
Solution:Trim the thread end.
Possible Cause: Lint is accumulated in the looper threader pipe.
Solution:Clean the looper threading pipe (page 38).
The Needle Threader does not Work
Possible Cause: The mark on the side cover is not aligned with the mark on the handwheel.
Solution: Set the handwheel in threading position (page 8, 15, 17).
Possible Cause: The needle threader switch is not set correctly.
Solution: Set the needle threader switch to R when threading the right needle and L when threading the left
needle (page 24).
Possible Cause: The needle threader is not used correctly.
Solution:See page 24 for instructions on how to use the needle threader.
Specications
Sewing Speed
Maximum 1300 rpm
Number of Needles/Needles
1-2 of type HAx1SP, size: #11-14
Stitch Length
1-5 mm
Stitch Width
3.3-7.5 mm
Number of Threads
2, 3, 4
Differential Feed Ratio
0.5-2.0
Type of Lamp
LED light
Needle Bar Stroke
26.5 mm
Machine Dimensions
Width: 351 mm
Depth: 284 mm
Height: 299 mm
Presser Foot Rise
5-7 mm
Weight
7.8 kg
42

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pfaff Admire Air 5000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pfaff Admire Air 5000 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Pfaff Admire Air 5000

Pfaff Admire Air 5000 Gebruiksaanwijzing - Nederlands - 44 pagina's

Pfaff Admire Air 5000 Gebruiksaanwijzing - Deutsch - 44 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info