If the required coffee quantity is obtained, •
press the same start/stop button (2/3) again.
The appliance stops making coffee. The
brewing time is programmed.
To restore the coffee quantity to the •
factory settings, press the on/off button
(1) to switch off the appliance.
Keep both start/stop buttons (2/3) pressed •
simultaneously for 3-4 seconds until all
indicators light briefly.
Emergency opening for coffee pad
cassette (fig. A & D)
If the locking collar (7) cannot be set to another
position after the appliance has cooled down,
the coffee pad cassette (11) must be removed
according to the following procedure:
Insert a straightened paper clip horizontally •
into the opening (16) directly next to
coffee pad cassette (11) and slightly press
the paper clip into the opening.
Energy-saving functions
Economic brewing function
If you want to switch off the appliance after
one brewing cycle, the economic brewing
function can be activated automatically.
To activate the economic brewing function, keep
the on/off button (1) and both start/stop
buttons (2/3) pressed simultaneously.
The ready-to-brew indicator (5) first illuminates
green and subsequently flashes red to indicate
that the appliance will switch off automatically.
Stand-by mode
If the appliance is not used for more than
approximately 5 minutes, the stand-by mode is
activated automatically. The ready-to-brew
indicator (5) flashes red. To activate the
appliance for use, press the start/stop button
(2/3) again.
Automatic switch-off function
The appliance switches off automatically if it is
has not been used for a period of 30 minutes.
Cleaning and maintenance
Before you proceed, we need you to pay
attention to the following notes:
- Before cleaning or maintenance, switch off
the appliance and remove the mains plug
from the wall socket.
- Do not immerse the appliance in water or
other liquids.
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not use aggressive or abrasive cleaning
agents to clean the appliance and the
various parts of the appliance.
• Regularly check the appliance for possible
damage.
Clean the outside of the appliance with a •
soft, damp cloth. Thoroughly dry the outside
of the appliance with a clean, dry cloth.
Clean the accessories after each use:•
- Clean the coffee pad cassette and the
ground coffee cassette in soapy water.
- Clean the dispenser cassette and the
insert in soapy water.
- Clean the water reservoir and the lid of
the water reservoir in soapy water.
- Clean the cup tray and the drip tray in
soapy water.
- Rinse the accessories under running water.
- Thoroughly dry the accessories with a
clean, dry cloth.
Rinsing the appliance (fig. A - C)
The appliance must be rinsed if it has not been
used for a couple of days. Always start rinsing
the appliance directly after switching on in
order to decrease energy consumption.
Before you proceed, we need you to pay
attention to the following notes:
- Be careful with hot water and steam to
avoid burns. Hot steam can escape from
the coffee dispenser during the process.
- Before rinsing the appliance, make sure
that the water reservoir is placed in the
appliance.
Rinse the water reservoir (12).•
Fill the water reservoir (12) with water up •
to the maximum mark ("MAX") on the
water level indicator (13).
