Symptoms Causes Remedies
Reference
The lens aperture ring is set
to other than the position.
The main switch is [OFF].
The low battery warning
is blinking.
The batteries are installed
bakwards.
is displayed on the LCD
panel.
The built-in flash is being
charged.
The main switch is [OFF].
No battery has been
installed.
The batteries are installed
backwards.
The battery is dead.
AF frame is not placed over
the subject.
The subject is too close.
The focus mode is set to
.
The subject is difficult to
autofocus.
Set the lens aperture ring to
the position.
Turn the main switch ON.
Replace the battery.
Install the batteries properly.
Set the exposure mode to
other position.
Wait until the flash is fully
charged.
Turn the main switch ON.
Install the batteries.
Install the batteries properly.
Replace the batteries.
Move the camera until the AF
frame covers the subject.
Increase the camera-to-
subject distance.
Set the focus mode switch to
.
Focus manually by using the
matte field.
P.24,
P.48
P.16
P.12
P.12
P56,
P64
P.34
P.16
P.12
P.12
P.12
P.30
P.30
P.27
P.60
The shutter does not
release
Nothing is displayed
on the LCD panel.
The Autofocus does
not work.
