Disposal of packaging and
appliances
The packaging of the appliance is recyclable.
It is made up off:
– cardboard
– polyethylene
– CFC free polystyrene (PS rigid foam)
– polypropylene straps around the box
Please dispose of these materials in a
responsible way in accordance with the
regulations of your local authority.
Your local authority will also be able to give
you information about disposing disused
household appliances in a responsible way.
Technical specifications
See identification plate for technical
specifications.
TECHNICAL SPECIFICATIONS
19
Mounting the canopy hood above
an island
Make sure that the ceiling is suitable for the
suspension of the construction chimney.
■ First determine the position and distance
with regard to the chimney. Make a 140 mm
hole in the ceiling for the duct.
■ If the opening for the flex (bottom of the
chimney construction 1) is pointed towards
you, then the control switches will be to
your right.
■ Drill 4 10 mm holes for the plugs and screw
the chimney against the ceiling.
■ Press the 2 flange halves (2) firmly
together, so that the snap connection is
made and then screw the assembled flange
(2) to the canopy hood.
■ Slide the inner cylinder (3) over the
chimney construction up to the ceiling and
fix it with 2 screws (4). Then slide the outer
cylinder (5) on.
■ Fix the canopy hood to the chimney
construction with the 4 M6 screws (6).
■ Make the electrical connection and
observe the flex opening (1).
■ Now fix the outer cylinder (5) to the cooker
hood with 2 screws, this is done from the
inside of the cooker hood.
■ Attach the protective strips over the edges
of the filter in the hood.
■ Remove the film from the filters.
18 INSTALLATION
