333459
15
Verklein
Vergroot
Pagina terug
1/31
Pagina verder
Installation
Only a qualified electrician should connect
the hob to the mains supply!
Damage caused by improper installation or
connection is not covered by the guarantee.
Safety instructions
To enable the appliance to function properly,
please ensure that:
That the appliance is sufficiently ventilated
(see building in dimensions).
That the connecting cable hangs freely and
is not caught by a drawer.
The worktop is at least 28 mm thick.
The worktop is flat.
If the hob is to be built in any nearer than
50mm from an adjacent wall or kitchen
cabinet, either to the back or side of the
appliance, the wall or cabinet should be
lined with a heat resistant material. Whilst
the hob itself will not generate heat a
saucepan or frying pan placed on the
appliance could possibly generate
temperatures high enough to damage some
materials.
Building-in dimensions and ventilation
The electronics in the hob need to remain cool
when in use and this is achieved by the aid of
vents on the underside of the appliance. Air is
supplied through these vents. For this it is
necessary:
To have an air inlet in the plinth measuring
100 cm
2
venting up behind the kitchen unit
to the appliance (see fig. 11).
FOT THE FITTER
00
490
580
510
56
560
Beluchting
100 cm
2
Fig. 9: Building-in dimensions
min. 25
100 cm
2
60
min. 100
28-40
min.100 cm
2
Fig. 10
Fig. 11: In combination with an oven. Insulate
oven from hob.
24
25
Faults
Please check the following points which may solve the problem, before calling the service
department.
FAULTS
Sympton
The appliance does not work.
The lights do not light up.
The cooking zones are not
working, the message F0
appears.
The fan switches itself on.
The appliance stops suddenly.
The message F7 appears.
The lamps continue to flash
after switching on.
Cause
No power supply.
Ambient temperature too low
(5 °C) before the hob was
plugged in.
The appliance checks itself
after the loss of power.
Ventilator is not far enough
open.
Transistors overheated.
Contact between pans/wall.
An unsuitable utensil is being
used.
Poor electrical connection.
Action
Check the electrical installation
(fuse(s), connection).
After installation, wait about ten
minutes. The messages stop
flashing and you can then use
the appliance.
The fan switches itself off.
Check ventilator openings at
front and back.
Press any control. The message
disappears. Restart at a lower
setting.
Place pans apart.
Use a suitable utensil. (See
page 17).
Check if the cable is being
caught by the drawer. If it is,
have it changed by the installer.
100 cm
2
770
510
490
750
40
56
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pelgrim idk 825 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pelgrim idk 825 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,24 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info