Handleiding Peg Perego Book (pagina 21 van 84) (Alle talen)

626122

Verklein

Vergroot

Pagina terug

1/84

Pagina verder

- 21 -

For swivelling wheels, lower the lever (arrow 1). For

fixed wheels, move the lever in the opposite direction

(arrow 2). We recommend using fixed wheels on rough,

uneven surfaces (fig_a).

BRAKE: to set the brakes on the stroller, lower the

levers on the rear wheels with your foot (Fig.b). To

release the brakes, lift the lever.

Always set the brakes when the stroller is not moving.

10• ADJUSTING THE HANDLES: the handles can be set into

4 different positions. For the highest position, push the

side buttons and lift the handle upwards at the same

time. Release the buttons. To lower the handles, do the

opposite .

11• HOOD: to assemble the hood, fasten the hood's side

attachments onto the sockets until they click (Fig.a);

expand the hood frame so that the fabric is fully

stretched (Fig.b).

12• Button the hood onto the stroller's backrest (Fig.c), on

both sides and inside the handle (Fig.d).

To remove the hood: unfasten the hood's side

attachments from the chassis by pressing the external

button (as shown in Fig.e) and unbutton it from the

backrest, the sides of the stroller and inside the handle.

13• The hood has a fabric loop, for tying toys (Fig.a).

The hood may come with different features

depending on the collection chosen.

The hood may come with a clear viewing panel

offering UV protection, through which it is possible to

see the child (Fig.b).

14• The hood can be adjusted to two positions (Fig. a).

Undo the zip (Fig. b) and stretch the fabric flap to see

the child and to let more air under the hood (Fig. c).

15• FOOT MUFF - Book Completo

To fasten the foot muff to the stroller:

- button it to the bottom of the footrest (Fig.a)

- fit it over the front bar and button it on (Fig.b).

- fasten the two buttons on the inner side of the foot

muff as shown in the figure (Fig.c).

The foot muff is now properly fastened.

- The foot muff also comes with a hand muffler for the

child (Fig.d).

16• The foot muff can also be applied another way:

- fasten the two closest buttons on the inner side of the

foot muff (Fig. a)

- place the foot muff over the seat, excluding the front

bar (Fig.b);

- fasten it to the sides, as shown in the figure (Fig. c).

The foot muff is now properly fastened.

17• FOOT MUFF- EMBOSSED FABRIC COLLECTION:

- fit the foot muff over the front bar (Fig.a);

- fasten the two lateral Velcro strips on both sides (Fig.b);

- detach the Velcro on the foot muff (Fig.c);

- fit it over the footrest (Fig.d);

- fasten the two lateral elastics on both sides (Fig.e)

- fasten the buttons under the footrest (Fig.f).

18• RAINCOVER for complete Book:

to fit the rain canopy, extend it over the stroller and

snap fit the buttons on both sides of the hood (Fig.a).

Fasten the elastic loops including the chassis in the

lower part of the stroller (Fig.b).

• Do not use the rain canopy indoors and always make

sure that the child is not too hot.

• Do not place the rain canopy near heat sources and

pay attention to cigarettes.

• Make sure that the rain canopy does not interfere with

any moving mechanism of the stroller.

• Always remove the rain canopy before folding up the

stroller.

• Wash with a sponge and soapy water. Do not use

detergents.

19• 5-POINT SAFETY HARNESS: to fasten, insert the two

buckles of the waist strap (with attached shoulder

straps, arrow a) into the leg divider strap until they

click into place (arrow b). To unfasten them, press the

button which is situated in the centre of the fastener

(arrow c) and pull the waist strap outwards (arrow d).

20• To tighten the waist strap, pull on both sides in the

direction of the arrow. To loosen it do the opposite.

21• To adjust the height of the safety harnesses, release

the two buckles on the rear of the backrest.

Pull the shoulder straps towards you (arrow a) until the

buckles are released and insert them in the backrest

loops (arrow b). Remove the shoulder straps from the

sack (arrow c) and insert them in the most appropriate

buckle (arrow d), then reattach the two buckles

behind the backrest (arrow e). The buckles are securely

attached when a click is heard (fig f).

WARNING: To fasten the belts in the third eyelet, lift the

fabric, as they are hidden in the lining.

22•

ADJUSTING THE FOOTREST: the footrest can be adjusted

to 2 positions. To lower the footrest, push the two little

side levers downwards and lower the footrest at the same

time. To raise the footrest, push it upwards until it clicks.

23• ADJUSTING THE BACKREST: the backrest can be reclined

into 4 positions. To lower the backrest, lift the handle

and lower the backrest at the same time. Block it in the

desired position. To raise the backrest, lift the handle

and raise the backrest at the same time. Block it in the

desired position.

24• FRONT BUMPER BAR: to attach the front bumper bar

remove the protection caps (Fig.a) and store them.

After removing the caps, insert the ends of the bumper

into the armrests until they click (Fig.b).

25• The bumper bar can be opened on one side so an older

child can climb on and off more easily. To open the

bumper bar, push the button on the side and pull the

bar outwards (Fig.a)

To remove the bumper bar, press the two buttons on

the sides and pull the bar outwards (Fig.b).

When the bumper bar is off, replace the protection

caps onto the chassis armrests to close them.

26• COLLAPSING THE STROLLER: to collapse the stroller,

put the front wheels into fixed position, close the hood

(if on the stroller) and remove the car seat (if on the

chassis).

- Align the handle with the stroller chassis as shown in

the picture (fig_a);

- lift the fastening hooks on the two sides of the chassis

(fig_b);

- Pull the interior handle placed behind the seat (fig_c)

and lift at the same time (fig_d).

27• then let the handle drop forwards until the stroller is

completely closed (fig_e).

Check that it has fastened to the closing hook on both

sides. If it has not, fasten the closing hook properly as

shown (fig_f).

The collapsed stroller is free standing.

To open the stroller, press on the frame and unfasten

the locking attachments on both sides (fig_g).

28• For greater compactness, it is possible to remove the

Peg Perego Book Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info