706364
104
Verklein
Vergroot
Pagina terug
1/110
Pagina verder
99GB / IE / NI
• Cut as described under section 8.5.
8.7 Precision adjustment of the
stop for bevel cut 45° (Fig.
1/12/13)
No stop angle included.
Lower the machine head (4) and secure
using the fastening bolt (30).
Fix the turntable (15) in the 0° position.
Loosen the locking screw (27) and use
the handle (1) to angle the machine head
(4) 45° to the left.
Place the 45° - position angle stop (b)
between the saw blade (6) and turntable
(15).
Release the locking nut (c) and adjust
the adjusting screw (34) until the angle
between the saw blade (6) and turntable
(15) is precisely 45°.
Re-tighten the locking nut (c).
Subsequently check the position of the
angle indicator.
If necessary loosen the bevel angle
pointer (24) using a Philips screwdriver,
set to position 45° on the bevel angle
scale (23) and re-tighten the retaining
screw.
8.8 Bevel cut 0°- 45° and mitre
cut 0° (Fig. 1/2/14)
The crosscut saw can be used to make bevel
cuts of 0° - 45° in relation to the work face.
Move the machine head (4) to the top
position.
Fix the turntable (15) in the 0° position.
Loosen the locking screw (27) and use
the handle (1) to angle the machine
head (4) to the left, until the bevel angle
pointer (24) indicates the desired angle
measurement on the bevel angle scale
(23).
Re-tighten the locking screw (27)
Cut as described in section 8.5.
8.9 Bevel cut 0°- 45° and mitre
cut 0°- 45° (Fig. 1/2/15)
The crosscut saw can be used to make bevel
cuts to the left of 0°- 45° in relation to the
work face and, at the same time, 0° - 45° to
the left or 0° - 45° to the right in relation to
the stop rail (double mitre cut).
Move the machine head (4) to its upper
position.
Loosening the metre lock handle (10) and
press the metre detent lever (11).
Using the mitre locking handle (10), set
the turntable (15) to the desired angle
(refer also to point 8.6 in this regard).
Re-tighten the mitre lock handle (10) in
order to secure the rotary table.
Loosen the locking screw (27) and use
the handle (1) to tilt the machine head
(4) to the left until it coincides with the
required angle value (in this connection
see also section 8.8).
Re-tighten the locking screw (27)
.
Cut as described under section 8.5.
8.10 Limiting the cutting depth
(Fig. 1/16)
The cutting depth can be infinitely
adjusted using the screw (19). To do this
loosen the knurled nut on the screw (19).
Move the stop for the cutting depth limitre
(18) to the outside. Turn the screw (19) in
or out to set the required cutting depth.
Then re-tighten the knurled nut on the
screw (19).
Check the setting by completing a test
cut.
8.11 Sawdust bag (Fig. 1)
Dust/Chip Extraction
Dust from materials such as lead-containing
Attachment and operation
104

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside PZKS 1500 B2 - IAN 295934 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside PZKS 1500 B2 - IAN 295934 in de taal/talen: Nederlands, Duits, Engels, Frans, Deens als bijlage per email.

De handleiding is 2,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info