691162
24
Verklein
Vergroot
Pagina terug
1/108
Pagina verder
GB IE
24
21 Warning!
The use of any accessory or attachment other than one
recommended in this instruction manual may present a
risk of personal injury.
 
This electric tool complies with the relevant safety rules.

using original spare parts, otherwise this may result in
considerable danger to the user.
Additional safety instructions
1 Safety Precautions
Warning! Do not use damaged, cracked or deformed
saw blades.
Replace a worn table insert. Regrinding is not allowed.
Only use saw blades recommended by the manufacturer
which conform to EN 847-1. Warning! When changing
the saw blade ensure that the cutting width is not smaller
and the main blade thickness of the saw blade not grea-
ter than the thickness of the riving knife!
Make sure that a saw blade is selected which is appro-
priate for the material to be cut.
- Wear appropriate personal protective equipment. This in-
cludes: Hearing protection to reduce the risk of becoming
hard of hearing, breathing respirator to reduce the risk of
inhaling hazardous dust.
- Wear gloves when handling saw blades and rough mate-
rials.
- Whenever practicable, saw blades should be carried in
a container.
Wear safety goggles. Any splinters, chips and dusts
which are ejected from the device when it is in operation
may cause sight loss.
Connect the power tool to a dust collection device when
sawing wood. Among other things, the emission of dust
is affected by the type of material to be machined, the
importance of local deposition (capture or source) and
-
chanisms.
- Do not use any saw blades made of high-alloy high-
speed steel (HSS).
Always store the push stick or push block in its holder on
the power tool when not in use.
2 Maintenance and Servicing
Always remove the mains plug when carrying out any
adjustments or maintenance work.
 -
cluding the properties of the blades, the condition of the
saw blade and power tool. If possible, use saw blades
that are designed to reduce the noise level, service the
power tool and tool attachments regularly and repair
them if necessary to reduce noise.
- Report any faults to the power tool, safety devices or the
tool attachment as soon as they are discovered to the
person responsible for safety.
3 Safe Working
Use the push stick or the handle with push block to pass
the workpiece safely past the saw blade.
Make sure that the riving knife is always used and that
this is correctly adjusted.
Use the upper blade guard and adjust it correctly.
Use only saw blades whose maximum speed is not lower
than the maximum spindle speed of the tool being used
and which are suitable for the material to be cut.
Do not create any rebates or grooves unless a suitable
protective device, such as a tunnel guard, is attached
above the saw table.
Circular saws must not be used for slotting (cutting
grooves which end in the workpiece).
When transporting the power tool, use only the transport
devices supplied. Never use the guards for handling or
transporting the tool.
- During transport, make sure that the top part of the saw
blade is covered, for example with the guard.
Ensure that the only spacer washers and spindle rings
which are used are suitable for the purpose stated by the
manufacturer.
 
of loose particles such as chips and cutting residues.
Working position always to the side of the saw blade.
Do not remove any cutting residues or other parts of the
workpiece from the cutting area for as long as the ma-
chine is running and the sawing unit is not yet in the rest
position.
Secure long workpieces against tilting at the end of the
cutting operation (e.g. unwinding stand or roller stand).
Caution! long workpieces against tilting at the end
of the cutting operation (e.g. unwinding stand or roller
stand).
Caution! Never remove any loose splinters, chips or jam-
med pieces of wood when the saw blade is still running.
Always switch off the machine and remove the plug
before repairing any faults or removing jammed pieces
of wood.
Always switch off the motor and remove the plug before
carrying out any conversions or adjustment, measurement
and cleaning work.
Before switching on, check that the spanners and adjust-
ment tools have been removed.
Warning! During operation, this power tool produces an elec-

negatively affect active or passive medical implants. In order to
reduce the danger of serious or fatal injuries, we recommend
that individuals who wear medical implants should consult their
doctor and the manufacturer of the implant before operating the
power tool.
Safety instructions
for handling saw blades
1 Only use tools which you know how to handle.
2 Pay attention to the maximum speed. The maximum speed
stated on the tool being used must not be exceeded. Keep

3 Note the direction of rotation of the motor and saw blade.
4 Circular saw blades with cracks in them must be taken out of
service (repair is not permitted).
5 Tools with visible cracks must not be used.
6 Tools must be cleaned regularly.
7 Handle the tools used with care. It is best to store these in
their original packaging or special containers. Always wear
protective gloves to improve your grip and further reduce the
24

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Parkside-PTK-2000-D3---IAN-298657

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside PTK 2000 D3 - IAN 298657 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside PTK 2000 D3 - IAN 298657 in de taal/talen: Nederlands, Duits, Engels, Portugees, Spaans als bijlage per email.

De handleiding is 2,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info