GB/IE/
CY
21
Operating mode S6
Rated operating period/rated idle period (4 min.
on/6 min off)
To prevent the motor from overheating, only
use the bench-type circular saw as follows:
After an operating period of 4 minutes (S 6 =
40%) under the permitted load, you must
interrupt your work for a period of 6 minutes in
which the machine can run idle.
Noise emission values
The noise emission values were measured in
accordance with EN 61029.
Idle speed
L
pA
sound pressure level 101.0 dB(A)
K
pA
uncertainty 3 dB
L
WA
sound power level 111.0 dB(A)
K
WA
uncertainty 3 dB
Wear ear-muffs.
The impact of noise can cause damage to
hearing.
The quoted values are emission values and not
necessarily reliable workplace values. Although
there is a correlation between emission and
immission levels it is impossible to draw any
certain conclusions as to the need for additional
precautions. Factors with a potential influence
on the actual immission level at the workplace
include the duration of impact, the type of room,
and other sources of noise etc., e.g. the number
of machines and other neighboring operations.
Reliable workplace values may also vary from
country to country. With this information the
user should at least be able to make a better
assessment of the dangers and risks involved.
Reduce noise generation and vibration to a
minimum!
■ Use only equipment that is in perfect
condition.
■ Maintain and clean the equipment regularly.
■ Adopt your way of working to the
equipment.
■ Do not overload the equipment.
■ Have the equipment checked if necessary.
■ Switch off the equipment when not in use.
7. Before starting the equipment
■ Before you connect the equipment to the
power supply make sure that the data on
the rating plate are identical to the supply
voltage.
■ Only ever connect the equipment to a
properly installed shock-proof socket which
is protected by a 10A fuse as a minimum.
■ Always pull out the power plug before
making adjustments to the equipment.
■ Unpack the bench-type circular saw and
check it for damage which may have
occurred in transit.
■ Make sure the machine stands securely, i.e.
bolt it to a workbench or solid base.
■ All covers and safety devices have to be
properly fitted before the equipment is
switched on.
■ It must be possible for the blade to run
freely.
■ When working with wood that has been
processed before, watch out for foreign
bodies such as nails or screws, etc.
■ Before you actuate the On/Off switch, make
sure that the saw blade is correctly fitted
and that the equipment’s moving parts run
smoothly.
