595354
6
Verklein
Vergroot
Pagina terug
1/53
Pagina verder
6 GB
Introduction / Important safety instructions / Safety notices specific to the device
Introduction
Cable winch PSZ 250 B2
Introduction
Please familiarise yourself with the appli-
ance before preparing it for use and using
it for the first time. To do so, please care-
fully read the following operating instructions and
the important safety information. Use the product
only as described and for the indicated purpose.
Keep these instructions in a safe place. If you pass
the device on to anyone else, please ensure that
you also pass on all the documentation.
Intended use
The cable hoist is used to hoist and lower loads in
indoor spaces in accordance with the equipment
power. Only use the device as described. Any other
use is not intended. The user / operator, not the ma-
n
ufacturer, is liable for damages or any type of inju
ry
resulting from any other use. Please note that our de-
vices were not constructed for commercial, manual,
or industrial use. We do not accept any warranty li-
ability if the device is used for commercial, manual,
or industrial operations, or activities similar to these.
Parts description
1
Mounting bracket
2
Mounting opening for hook in deflection
operation
3
Hoisting drum
4
Maximum cable length lever
5
Auto-stop mechanism lever
6
Steel cable
7
Shut-off weight
8
Hook
9
Emergency stop switch
10
Push button
11
Remote control unit
12
Mains lead
13
Control lead
14
Motor
15
Deflection pulley
16
Additional hook
Scope of delivery
1 Cable hoist
2 Mounting bracket with mounting materials (Fig. C)
1 Deflection pulley with additional hook and moun-
ting materials (see Fig. D)
1 Set of instructions for use
Technical Data
Voltage: 230 V
~
50 Hz
Rated current: 2.2 A
Power input: 500 W
Duty type: S3 20 % 10 min
Rated load: 125 / 250 kg (without / with
deflection pulley)
Hoisting height: 11.5 / 5.7 m (without / with
deflection pulley)
Rated speed: 8 / 4 m / min (without / with
deflection pulley)
Steel cable
diameter: 3.0 mm
Steel cable
tensile strength: 1870 N / mm
2
Insulating level: B
Degree of
protection: IP54
Power unit class: M1
Net weight: 9.3 kg
Gross weight: 10.5 kg
Duty type 3–20 % - 10 min: S3 = Intermittent duty
without the effect of starting. During a 10 min period
the max. operating time is 20 % (2 min).
Mechanical group M1.
The rated power of the device does not vary with
the position of the load.
The value of the A-rated noise emission in the oper
ator
position is less than 70 dB.
The cable hoist must be operated at ambient tempe-
ratures from 0 °C to 40 °C and a relative humidity
below 85 %. Height above sea level: max. 1000 m.
100684_par_Seilhebelzug_content_PL_SI_SK_NL.indd 6 02.07.14 12:41
6

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Parkside-PSZ-250-B2---IAN-100684

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside PSZ 250 B2 - IAN 100684 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside PSZ 250 B2 - IAN 100684 in de taal/talen: Nederlands, Duits, Engels, Pools als bijlage per email.

De handleiding is 6,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info