744061
41
Verklein
Vergroot
Pagina terug
1/55
Pagina verder
41 GB/MT
Preparing for use
Push the coupler (see Fig. A) onto the recharge-
able battery pack
9
. Insert the mains plug
into the socket.
The red charge indicator LED
15
indicates that the
charging process has started. The red light goes out
as soon as the battery pack
9
is fully charged.
The green charge indicator LED
16
shows that
the charging process is complete and the
battery pack
9
is ready for use.
NOTE: If the rechargeable battery pack is discharg
ed
and still hot from from the tool being used, it will not
be recharged immediately. The charging process
will start automatically, as soon as the rechargeable
battery pack has cooled to an adequate temperature.
Do no
t use the quick-charge process to charge
a battery pack
9
for a second time in close
succession. Otherwise there is the danger that
the battery pack
9
will become overcharged
and its useful life and that of the charger reduced.
Switch the charger
14
off for at least 15 min-
utes between successive charging processes.
To do this pull the mains plug out of the socket.
Inserting / removing the battery
pack into / out of the device
Removing the rechargeable battery pack:
In or
der to remove the rechargeable battery,
turn the appliance 180°.
Press the unlocking button
8
and push the re-
chargeable battery pack
9
out of the appliance.
Inserting the rechargeable battery pack:
Push t
he rechargeable battery pack
9
onto
the appliance.
Checking the battery
charge state
Press the battery charge state test button
3
.
The remaining charge capacity is shown on the
LED display
2
.
2-speed gear operation
In first gear (gear selector switch
1
in
position: 1)
the device achieves a speed of approx. 500 min
-1
and a high torque. For example, for screwing work
with small screw diameters.
In second gear (gear selector switch
1
in
position: 2)
the device achieves a speed of approx. 1800 min
-1
and a lower torque. For example, for rapid drill
progress in masonry or large drill or screw diameters.
Torque preselection
Use the torque preselection ring
13
to set the torque.
When this set torque is reached the clutch decouples
the drive. This allows you to screw in screws to a
predetermined depth, which is ideal e.g. for screw-
ing in a series of screws.
Select a lo
wer setting for small screws or soft
materials.
Select a high se
tting for large screws, hard ma-
terials, or when screwing out screws.
F
or drilling tasks select drilling setting by placing
the torque preselection ring in the
position.
Drilling / screwing /
impact drilling
Drilling / screwing:
Turn the setting ring
12
to the symbol .
Impact drilling:
T
urn the setting ring
12
to the symbol .
Changing inserted tools
Your cordless hammer drill has a fully automatic spindl
e
lock
and is fitted with a single-sleeve drill chuck
with radial lock “Made in Germany” by
.
Once the motor has come to a halt, the drive shaft
is automatically locked so that the quick-action drill
41

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside PSBS 24 A1 IAN 64192 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside PSBS 24 A1 IAN 64192 in de taal/talen: Engels, Portugees, Spaans als bijlage per email.

De handleiding is 0,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Parkside PSBS 24 A1 IAN 64192

Parkside PSBS 24 A1 IAN 64192 Gebruiksaanwijzing en installatiehandleiding - Nederlands, Deutsch, Français, Italiano - 45 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info