722811
44
Verklein
Vergroot
Pagina terug
1/193
Pagina verder
PKSA 20-Li A1
38 
GB
IE
Before use
RISK OF INJURY!
Always switch the tool off and remove the bat-
tery before carrying out any work on the tool.
WARNING!
Always carry out checks before use and with
the tool switched off.
Check that the tool is in good working order
before every use and after it has been
dropped.
Check whether moving parts work properly.
Many accidents are caused by poorly main-
tained tools.
Have any damage repaired by qualified
specialists.
Use the chainsaw and accessories only as
described in these instructions, taking into
account the working conditions and the work
to be performed.
Using machine tools for purposes different
from those intended could result in a hazard-
ous situation.
Check the chain brake is in good working order
regularly (front hand guard, see fold-out page,
fig. B).
Check that the guide rail is correctly fitted.
Check that the saw chain is correctly tensioned.
Follow the instructions for lubrication, chain
tension and changing accessories. An incorrectly
tensioned or lubricated chain can break or
increase the risk of kickback.
Keep cutting tools sharp and clean. Sharpen
them regularly and replace worn parts prompt-
ly. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
Check the throttle control and the throttle control
lock for freedom of movement. The throttle con-
trol must spring back into the start position.
Check whether the handles are clean, dry and
free of oil and dirt.
Never carry out the work alone. In case of
emergency, someone should be close by.
Use the chainsaw only if you are standing on
firm, safe and even ground.
Do not overreach.
Slippery ground or unstable standing surfaces
(e.g. on a step ladder) can lead to a loss of
balance or loss of control of the chainsaw.
Keep proper footing and balance at all times.
This enables better control of the chainsaw in
unexpected situations.
Do not use the chainsaw in a tree. When working
in a tree there is a risk of injury.
Never saw above shoulder height.
Always hold the chainsaw with your right hand
on the rear handle and your left hand on the
front handle (see fold-out, page fig. C). Holding
the chainsaw in an inverted working posture
increases the risk of injuries and is prohibited.
When the chainsaw is running, keep all body
parts away from the saw chain. Before starting
the chainsaw, make sure that the saw chain is
not touching anything. When working with a
chainsaw, a moment of inattentiveness can lead
to clothing or body parts getting caught in the
saw chain.
Switch the chainsaw off immediately if you no-
tice any changes in the way the tool behaves.
If the chainsaw hits a stone, nails or other hard
objects, stop the motor immediately and check
the saw chain and the guide rail for damage.
44

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside PKSA 20-Li A1 - IAN 327523-1904 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside PKSA 20-Li A1 - IAN 327523-1904 in de taal/talen: Nederlands, Duits, Engels, Frans, Pools als bijlage per email.

De handleiding is 3,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info