684713
55
Verklein
Vergroot
Pagina terug
1/310
Pagina verder
55
IEGB
If the thread ends can not be
lengthened:
Turn off the device.
Press the core insert as far as it will go
and pull rmly on the end of the string.
If no line ends are visible:
Replace the spool (see chapter on
‘Replacing the spool’).
Attention! Thread remnants
can be projected and lead to
injuries.
A
Switching on and off
The device has a central on/off
switch (28).
After 2 minutes of non-use, the device
switches off automatically and must
be switched on again via the central
on/off switch (28) before reuse.
As soon as a rechargeable battery
is removed, the device also switches
off automatically.
Ensure your stance is stable and
hold the appliance tightly with both
hands and away from your body.
Before switching the apparatus on,
make sure that it is not touching
any objects.
1. Turn the device on using the on/off
switch (28). The charge status indicator
(27) lights up as long as the device is
switched on.
2. To start, press and hold the safety
switch (29) while pressing the start
switch (30). The hedge trimmer runs at
top speed. You can release the safety
switch (29) again.
3. To switch it off, release the start switch
(30).
4. Turn the device off using the on/off
switch (28).
Working with the hedge
trimmer
While cutting, make sure that you
do not touch any objects, such as
wire fences or plant supports. This
can cause damage to the cutter bar.
To avoid eye injuries, always wear
safety goggles while working with the
hedge trimmer.
Always hold the device tightly with
both hands, with one hand on the rear
handle and the other hand on the front
round handle (
A
5).
Your thumb and ngers must tightly
clasp the handles.
Check the carrying harness (
A
19) for
comfortable positioning which facilita-
tes holding the hedge trimmer.
If the blades become jammed with
solid objects, switch the device off
immediately, pull the mains plug, and
remove the object.
Avoid over-stressing the device while
working.
Working with the pole-
mounted pruner
If the saw chain gets stuck,
do not attempt to pull out the
pruner with force. There is a
risk of injury. Turn the motor
off and use a lever arm or
wedge to release the pruner.
You will have better control over the
device if you saw using the lower edge
of the blade bar (saw chain in pulling
direction) and not using the upper edge
55

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Parkside-PKGA-40-Li-A1---IAN-313870

Zoeken resetten

  • LS
    Ik heb een Parkside apparaat PKGA 40-LiA1.
    Ik ben op zoek naar de ronde dop die je op de spoel moet zetten. Met die dop moet je een tikje op de grond geven om de maaidraad te verlengen. Kunt u mij helpen? In de beschrijvingen staat deze dop waarschijnlijk onder nummer 17 maar ziet er toch anders uit dan wat ik bedoel. Waar kan ik zo'n dop bestellen in Nederland?
    mvg
    mw. Mulder - de Vree Gesteld op 10-11-2022 om 21:54

    Reageer op deze vraag Misbruik melden
  • Bevestiging van metalen onkruid maaier van accu maaier Gesteld op 8-11-2021 om 16:34

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside PKGA 40-Li A1 - IAN 313870 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside PKGA 40-Li A1 - IAN 313870 in de taal/talen: Nederlands, Duits, Engels, Frans, Pools als bijlage per email.

De handleiding is 5,14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info