762951
25
Verklein
Vergroot
Pagina terug
1/110
Pagina verder
25
IE
GB
coupling (12) and the water connec-
tion (13) on the device.
5. Connect to the spray gun (14) by insert-
ing and screwing in the jet pipe (3).
6. If the jet pipe (3) is mounted, connect
either the standard Vario nozzle (25)
or the turbo dirt miller (26) by inserting
into the jet pipe (3). The attachments
snap into place. To remove the attach-
ments, press the side lock (7) on the
front end of the jet pipe (3) and pull the
attachment forwards to disconnect it.
7. Connect the rotating washing brush
(21) directly to the spray gun (14) by
inserting it and tightening (bayonet t-
ting). It is always used without applying
any pressure. The cleaning function is
produced by the rotational movement
and the ow of water. If there is no
water ow, the washing brush does not
rotate.
If you turn the tip of the standard
Vario nozzle (25) to the left you will
increase the width of the jet. If you
turn the nozzle tip to the right you
will reduce the width of the jet.
The roles of the unit, use the handle
(2) only in conjunction with the
wheels (11). For lifting and carrying
use the carrying handle (2).
Mains connection
The pressure cleaner you have acquired
is already tted with a mains plug. The
equipment is designed for connection to an
earthed wall socket with a RCD (Residual
Current Device) at 230V~50Hz.
Only operate the pressure cleaner
after all the above points have been
observed.
1. Ensure that the pressure cleaner is
turned off by its ON / OFF switch (8).
2. Insert the mains plug into the mains
socket
Operation
Be prepared for the recoil
force of the emitted wa-
ter jet! Ensure that you are
standing rmly and that you
are holding the gun (14) se-
curely, otherwise you could
injure yourself or other
people.
Never operate the pressure cleaner
with a closed water tap. Dry run-
ning will damage the pressure
cleaner!
1. Turn on the water tap entirely.
2. Switch on the pressure cleaner with the
ON / OFF switch (8).
Only ever switch on the pressure clean-
er once you have connected all of the
water pipes and they do not leak.
The motor switches on until the re-
quired pressure has built up. After
the pressure has built up, the motor
switches off.
3. Press the gun (14) starting lever (19).
The nozzle operates by pressure and
the motor switches back on.
Releasing the starting lever (19) causes
the equipment to switch off. The system
remains pressurised.
The turbo dirt miller (26) with its rota-
ting water jet is particularly suitable for
working with low water consumption.
The standard Vario nozzle (25) with its
at jet is particularly suitable for surfa-
ce cleaning.
If you turn the nozzle tip to the left you
will increase the pressure. If you turn
the nozzle tip to the right you will re-
duce the pressure.
25

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Parkside-PHD-170-B2---IAN-346400

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside PHD 170 B2 - IAN 346400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside PHD 170 B2 - IAN 346400 in de taal/talen: Nederlands, Duits, Engels, Frans, Pools als bijlage per email.

De handleiding is 2,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Parkside PHD 170 B2 - IAN 346400

Parkside PHD 170 B2 - IAN 346400 Gebruiksaanwijzing - Nederlands - 19 pagina's

Parkside PHD 170 B2 - IAN 346400 Gebruiksaanwijzing - Deutsch - 22 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info