684857
22
Verklein
Vergroot
Pagina terug
1/119
Pagina verder
PFDS 33 A1
18 
GB
IE
FLUX-CORED WIRE WELDER PFDS 33 A1
Introduction
Congratulations on the purchase of your new appliance. You have selected
a high-quality product. The operating instructions are part of this product.
They contain important information about safety, usage and disposal.
Before using the product, please familiarise yourself with all operating and
safety instructions. Use the product only as described and for the range of
applications specified. Please also pass these operating instructions on to
any future owner.
Intended use
The appliance is suitable for self-shielded flux-core welding using an
appropriate wire. No additional gas is required. The protective gas is
contained in powdered form in the wire itself, is thus fed directly into the
arc and means that the appliance is not susceptible to wind and can be
used outside.
Only the filler wire designed for this appliance may be used.
Proper use also involves compliance with the safety instructions as well as
the assembly instruction and the operating notes in the operating instruc-
tions.
Comply exactly with the applicable accident prevention regulations.
The appliance may not be used:
in rooms with insufficient ventilation,
in damp or wet environments,
in explosive atmospheres,
for the purpose of thawing pipes,
in the vicinity of people with heart pacemakers and
in the vicinity of flammable materials.
Use this appliance only as described in this instruction manual. All other
uses are deemed to be improper and may result in property damage or
even in personal injury.
The manufacturer is not liable for damages caused by improper or incorrect
use.
Residual risk
Even if you operate this appliance properly, there will still be residual risks.
The following risks can occur in the context of the design and construction
of this flux-core welder:
Eye injuries from flashes,
Touching hot parts of the appliance or the workpiece (burns),
In the case of insufficient protection, risk of accidents and burns due to
flying sparks or slag,
Harmful emissions of smoke and gases in the event of poor ventilation
or insufficient extraction in closed rooms.
Reduce the residual risks by using the appliance carefully and in accordance
with all the instructions.
Features
Cover wire feed unit
Carrying strap
Catch
Mains plug
Earth cable with earth clamp
Cable assembly with direct connection
Torch button
Torch
Steel sleeve
Setting wheel for wire feed
MIN/MAX switch for welding current
1/2 switch for welding current
Main switch ON/OFF (incl. power indicator)
Overload protection control lamp
Torch nozzle (1.0 mm)
Torch nozzle (0.8 mm)
Flux-core wire spool (wire roll) Ø 0.9 mm/510 g
Chipping hammer with
steel brush
Welding mask after assembly, consisting of:
Protective plate
Protective glass catch
Mounting clip
Dark welding lens
Handle
Package contents
1 flux-cored wire welder PFDS 33 A1
1 steel sleeve (pre-assembled)
3 weld nozzles ( 1 x 1.0mm pre-assembled; 1 x 0.8mm; 1 x 1.0mm)
1 chipping hammer with
steel brush
1 flux-core wire Ø 0.9 mm/510 g
1 welding mask
1 carrying strap
1 set of operating instructions
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside PFDS 33 A1 - IAN 280331 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside PFDS 33 A1 - IAN 280331 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 4,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info