595411
26
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
23
PDMS A1
GB
WARNING!
The noise emission values specifi ed in these
instructions have been measured in accordance
with the standardised measuring procedure
specifi ed in EN ISO 15744 and can be
used to make equipment comparisons. The
noise emission values vary in accordance
with the use of the compressed air tool and
may be higher than the values specifi ed in
these instructions in some cases. It is easy to
underestimate the noise emission load if the
compressed air tool is used regularly in a
certain manner.
NOTE
For an accurate estimate of the noise emission
load during a certain working period, the
times during which the appliance is switched
off or is running but not actually being used
must also be taken into consideration. This
can signifi cantly reduce the noise emission
load over the total working period.
General safety
instructions for
compressed air tools
WARNING!
For multiple hazards: Please ensure that you
have read and understood the safety instruc-
tions before adjusting, operating, repairing,
maintaining or replacing accessories on the
mini die grinder as well as before working in
the vicinity of the machine. Failure to do this
can result in serious bodily injury.
The mini die grinder should only be adjusted,
set or used by adequately qualifi ed and trained
operators.
This mini die grinder must not be modifi ed.
Modifi cations can reduce the eff ectiveness of
the safety measures and increase the risks for
the operator.
Never use damaged machines.
Save all warnings and instructions for future
reference! The safety instructions should not
be lost – give them to the operator.
Workplace safety
Keep your working area clean and well lit.
Cluttered and dark areas invite accidents.
Slipping, tripping up and falling are the main
causes of injuries at the workplace. Take note
of surfaces which could have become slippery
through use of the machine, and also any trip-
ping hazards caused by air or hydraulic hoses.
Proceed with caution in unknown surroundings.
Hidden hazards caused by power or other supply
lines may be present.
Do not work with the compressed air tool
in areas subject to the risk of explosions,
or in areas where fl ammable liquids, gases
or dusts are located. Grinding work creates
sparks which may ignite the dust or fumes.
Keep children and other unauthorised person-
nel at a safe distance when using compressed
air tools. Distractions can cause you to lose
control.
The grinder is not insulated against electrical
power sources.
Safety instructions
Always wear eye protection when using or
servicing the grinder.
Always wear suitable protective clothing.
Protect your hands, hair and clothes from being
drawn in by rotating parts.
Always wear respiratory protection in the
presence of dust.
Always wear hearing protection.
Always wear safety gloves.
Only connect the grinder to the compressed air
supply when it has been switched off and when
the tool has been clamped.
Sparks are created during grinding. Ensure that
nobody can be endangered by fl ying sparks.
You should also remove any fl ammable materials
or objects.
Do not carry the grinder if it has been connected
to the compressed air hose.
Be aware of the hazards caused by a fl ailing
compressed air hose!
IB_43105_PDMSA1_LB1.indb 23IB_43105_PDMSA1_LB1.indb 23 14.05.14 11:1314.05.14 11:13
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside PDMS A1 - IAN 43105 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside PDMS A1 - IAN 43105 in de taal/talen: Nederlands, Duits, Engels als bijlage per email.

De handleiding is 0,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Parkside PDMS A1 - IAN 43105

Parkside PDMS A1 - IAN 43105 Gebruiksaanwijzing - Français - 34 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info