764045
9
Verklein
Vergroot
Pagina terug
1/112
Pagina verder
PBLG 52 A16 GBIE
Vibrations
WARNING!
You can reduce the vibration risk, for example, the risk of Raynaud's
phenomenon (circulatory problems), by taking regular breaks during
which you rub your hands together.
Always wear protective gloves and ensure your hands are warm.
Take regular work breaks.
Before use
Setting up the appliance (see fig. A)
Take the two hose clips 4 + 6 and slide them over the ends of the
flexible pipe 5.
Push the larger end of the flexible pipe 5 onto the curved pipe 3 and
tighten the hose clip 4 using the philips screwdriver h.
Slide the control pipe 7 into the flexible pipe section 5 and tighten
the hose clip 6 using the philips screwdriverh.
First loosen the fixing screws s on the operating lever 8.
Slide the operating lever8 onto the guide of the head pipe 7.
Attach the operating lever8 using the supplied fastening screwss
and locking nutsd.
Push the pipe extensionq onto the control pipe 7.
To fix the pipe extensionq in place, turn it clockwise (see fig. A) and
secure it by tightening the inserted screw.
If an extension is required, push the second pipe extension onto the
previously mounted pipe extension q.
To fix the pipe extension in place, turn it clockwise (see fig. A) and
secure it by tightening the inserted screw.
Push the desired end pipe (round) w or end pipe (flat) f onto the
pipe extension q or and fix it in place by turning it clockwise
(see Fig. A) and secure it by tightening the inserted screw.
NOTE
Higher air velocity = flat tailpipe f
Normal air velocity = circular tailpipe w
Disassembly is carried out in the reverse order.
Mixing fuel
The engine must be operated with a mixture of petrol and motor oil.
WARNING!
Avoid direct skin contact with fuel and do not inhale fuel vapours.
Always use a mixture of unleaded petrol (at least RON 95) and special
2-stroke engine oil (JASO FD/ISO-L-EGD). Mix up the fuel mix
according to thefuel mix table.
Pour the correct amount of petrol and 2-stroke oil into the openings
provided in the enclosed mixing container g (see “Fuel mix table”).
Tilt the mixing container g to the side so that the filled oil can flow into
the chamber with the petrol.
Then give the mixing tank g a good shake.
Fuel mix table
Mixing process: 40 parts petrol to 1 part oil
Petrol 2-stroke oil
0.5 litres 12.5 ml
Adding fuel
WARNING!
Fill the fuel tank only when the engine is switched off and cooled
down. There is a risk of fire!
Always clean the area around the fuel tank capu before filling to
prevent dirt getting into the fuel tanki.
Use a dry, lint-free cloth to do this.
Place the appliance on a suitable, level surface so that the fuel tank
capu is facing upwards.
Turn the fuel tank capu anticlockwise and remove it.
The fuel tank capu is connected to the fuel tank with an anti-loss
device and cannot fall down.
Fill the fuel mixture into the fuel tanki using the funnelj.
Do not spill any fuel while filling the fuel tanki and do not fill it to
overflowing.
Wipe up any spilled fuel immediately.
Turn the fuel tank capu clockwise to close it.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Parkside-PBLG-52-A1---IAN-354733

Zoeken resetten

  • We hebben zins een jaartje een Parkside bladblazer PBLC 53 A1 en deze start slecht, kunt u mij zeggen hoe de start procedure officieel is.
    M.vr.gr. Jaap Vonk Gesteld op 30-11-2022 om 22:03

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside PBLG 52 A1 - IAN 354733 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside PBLG 52 A1 - IAN 354733 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans, Pools, Deens als bijlage per email.

De handleiding is 3,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info