764049
14
Verklein
Vergroot
Pagina terug
1/104
Pagina verder
14
GB IE NI
system . Then rmly tighten the chain
wheel cover wing nut (3).
Caution! The pole-mounted pruner
can be prone to leaks.
Tensioning the saw chain
Regularly tightening the saw chain provi-
des safety for the user and reduces and/or
prevents wear and chain damage. Before
starting work and at intervals of approx.
10 minute, we recommend the user to
examine the chain tension and correct it if
necessary.
The saw chain warms up when working
with the saw and thus expands slightly.
These „expansions“ can be expected espe-
cially from newer saw chains.
Do not re-tension or change the
saw chain when it is hot because it
shrinks slightly once it has cooled
down. If this is not observed it can
lead to damage on the guide rail or
the motor because the saw chain is
now too taut on the blade bar.
Chain tension and chain lubrication have
a signicant impact on the service life of
the saw chain.
10 min
The saw chain is
properly tensi-
oned when it
does not hang
from the underside of the blade bar and
cannot be moved around by a gloved
hand. When pulling on the saw chain with
9 N (approx. 1 kg) of force, the saw chain
and blade bar should not be separated by
a distance of more than 2 mm.
Risk of injury!
Remove the batteries from
the device before working
on the device.
B
Tensioning the saw chain
The chain tensioning ring (4) can-
not be turned more than three
quarters of a turn. When you are
tensioning the chain for the rst
time, the arrow of the ring (4) and
the arrow on the housing of the unit
must point to each other.
1. Loosen the wing nut (3) .
2. Tension the saw chain (2) by turning
the ring (4) of the chain tensioning sys-
tem clockwise .
Reduce the saw chain tension by turn-
ing the ring anti-clockwise .
3. Tighten the wing nut (3) .
The chain tension of a new saw
chain must be readjusted after a
maximum of 5 cuts.
Assembling the motor
head
1. Insert the extension arm (27) into the
threaded coupling (26) on the motor
head (19). The lug on the extension
arm (28) must engage in the recess on
the threaded coupling!
2. Screw the coupling nut (6) tight.
Initial Operation
Do not use the equipment
without the hand guard.
Wear suitable clothing and
work gloves when working
with the equipment.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside PAHE 20-Li B2 - IAN 354671 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside PAHE 20-Li B2 - IAN 354671 in de taal/talen: Nederlands, Duits, Engels, Deens als bijlage per email.

De handleiding is 2,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info