745198
6
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
6 GB/IE
Damaged or tangled cables increase the risk
of an electric shock.
If the mains power cable of this appliance is
damaged, it must be replaced by the manufac-
turer or its service department, or a similarly
qualified person to prevent hazards.
Use in weather protected rooms only
Unplug if you will not be using the device for
more than 30 minutes.
Let the device completely cool down after use
and before storing.
Do not use on material containing asbestos.
Avoid the risk of injury and burns as
well as heath hazards:
Risk of burning! The glue and the nozzle
reach over plus 105 °C.
Do not touch the nozzle or the glue. Do not let
the hot glue touch people or animals. If there
is contact with skin immediately put the affec-
ted area under cold running water for several
minutes. Do not try to remove the glue from
your skin.
Always run the power cable away from the
appliance to the rear.
Original accessories / tools
Use only the accessories and attachments
detailed in the operating instructions, or those
which are compatible with the device.
Start-up
Prepare the area to be glued:
Do not use any flammable solvents to clean the
area.
The room temperature and the temperature of
the material to be glued may not be colder
than +5 °C and no warmer than + 50 °C.
The area must be clean, dry and grease free.
Smooth out the surface before gluing.
Warm up cooled material such as e.g. steel for
a better join.
1. Fold the stand leg
4
out. Set the device aside.
2. Put a glue cartridge in the feed canal
1
.
3. Let the device warm up for 5 minutes. The
device is now ready to use.
Gluing:
Press the feed trigger
3
to start and control
the flow of glue.
1. Apply the glue in dots. Apply the glue in a
zigzag line on flexible material e.g. textiles.
2. Press both glued together work-pieces together
immediately after applying the glue for
approx. 30 seconds. The glued area is resilient
after approx. 5 minutes.
3. Place the glue gun on its stand leg
4
between
gluing.
Switching the device off:
Pull the mains plug from the socket.
Maintenance and Cleaning
The low temperature glue gun is maintenance free.
WARNING! Unplug the mains plug from the
socket before cleaning.
Always keep the device clean, dry and free of
oil or grease.
Do not allow liquids to enter the equipment.
Please use a soft cloth for cleaning the
housing. Never use petrol, solvents or cleaning
agents that attack plastic.
Service
Have your appliance
repaired by qualified specialist per-
sonnel using OEM parts only. This will
maintain the safety of the device.
If the plug or mains
lead needs to be replaced, always
have the replacement carried out by
the manufacturer or its service centre.
This will maintain the safety of the device.
Note: Spare parts not listed (e.g. carbon brushes,
switches) can be ordered through our call centre.
Safety instructions / Start-up / Maintenance and Cleaning / Service Warranty / Disposal
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside IAN 93549 PNKP 105 A1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside IAN 93549 PNKP 105 A1 in de taal/talen: Nederlands, Duits, Engels, Frans, Zweeds als bijlage per email.

De handleiding is 0,54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info