745134
33
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
30
PHKSU 710 A1
GB
d) Support large panels or boards to reduce
the risk of the saw blade jamming and caus-
ing a kickback. Large panels or boards can
bend under their own weight. Panels/boards
must be supported on both sides: both in the
vicinity of the saw cut and also at the edge.
e) Do not use damaged or blunt saw blades. Saw
blades with blunt or misaligned teeth may cause
excessive friction in the saw cut and cause a saw
blade jam and kickback.
f) Before sawing, ensure that the fastenings
for the cut depth and cut angle settings are
tightened. If the settings change during sawing,
the saw blade can jam and cause a kickback.
g) Be particularly careful when sawing in existing
walls or other obscured areas. The saw blade
could get caught on a hidden object and cause
a kickback.
Function of the lower blade guard
a) Before every use, check to ensure that the
lower blade guard closes properly. Do not
use the saw if the lower blade guard cannot
move freely and does not close itself imme-
diately. Never jam or fasten the lower blade
guard open. If the saw accidentally falls to the
oor, the lower blade guard may be bent or
damaged. Open the blade guard using the
release lever and ensure that it moves freely
and does not touch the saw blade or other
parts at any cutting angles or depths.
b) Check that the spring for the lower blade
guard is functioning correctly. Have the device
serviced before using it if the lower blade
guard and spring are not working properly.
Damaged parts, sticky deposits or accumulations
of chippings can cause the lower blade guard
to operate to slowly.
c) Open the lower blade guard by hand only
for certain cuts such as plunge or angle cuts.
Use the release lever to open the lower blade
guard and let go of this as soon as the saw
blade penetrates the workpiece. During all
other types of sawing work, the lower blade
guard should function automatically.
d) Do not leave the saw on the work bench
or the fl oor if the lower blade guard is not
fully covering the saw blade. An unprotected,
still-spinning saw blade moves the saw in the
opposite direction to the cutting direction and
saws anything in its path. Always, take into
account that the saw blade takes some time to
stop spinning.
Supplementary notes
Do not use any grinding discs.
Use only saw blade with diameters correspond-
ing to the label on the saw.
When sawing wood or other materials which
may create dusts that are hazardous to health,
always connect a suitable, certifi ed vacuum
extractor device.
Wear a dust mask when sawing wood.
Use only the recommended saw blades.
Always wear ear protectors.
Do not allow the teeth of the saw blade to overheat.
When sawing plastic, avoid melting the plastic.
Original accessories / additional
equipment
Only use accessories and additional equipment
that are specifi ed in the operating instructions
and are compatible with the device.
Initial Operation
Fitting / changing the saw blade
Always pull out the plug from the mains before
changing the saw blade !
1. Set the cutting depth (using locking screw for
cutting depth scale
) to the minimum
position, 0 mm.
2. Swing the lower blade guard
back using
the release lever and put the device down.
3. Press the spindle lock button
(until it engages)
and use the Allen key to release the clamping
screw/washer
. Now remove the clamping
screw/washer
and the clamping fl ange
(see also Fig. A).
IB_90882_PHKSU710A1_LB2.indb 30IB_90882_PHKSU710A1_LB2.indb 30 22.07.13 14:2022.07.13 14:20
33

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside IAN 90882 PHKSU 710 A1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside IAN 90882 PHKSU 710 A1 in de taal/talen: Frans als bijlage per email.

De handleiding is 1,63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Parkside IAN 90882 PHKSU 710 A1

Parkside IAN 90882 PHKSU 710 A1 Gebruiksaanwijzing - Nederlands, Deutsch, English - 42 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info