745108
30
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
30 GB
General safety advice for electrical power tools
piece or cause a kickback, when the saw is
started anew.
d) Support big boards to reduce the risk
of a kickback due to a jamming saw
blade. Big boards can bend through due to
their own weight. Boards must be supported
on both sides, at the outside and near the
cutting edge.
e) Do not use blunt or damaged saw
blades. Saw blades with blunt or wrongly set
teeth cause increased friction, jamming of the
blade and kickback due to a saw gap that is
too tight.
f) Tighten the adjustments for cutting
depth and cutting angle before start-
ing to cut. If the adjustments change during
cutting, the saw blade can jam and cause a
kickback.
g) Take particular care, when plunge
cutting into existing walls or other
areas that you cannot inspect. The saw
blade can jam when cutting into hidden ob-
jects and thereby causing a kickback.
Safety instructions for
plunge saws
a) Before every use check that the safe-
ty cover closes without problems. Do
not use the saw, if the safety cover
does not move freely and does not
close instantly. Never fix or tie back
the safety cover in the opened posi-
tion. If the saw is dropped accidentally, the
safety cover can be bent. Ensure that the safety
cover moves freely and does not touch either
the saw blade or other parts.
b) Check condition and function of the
safety cover spring. If safety cover
and spring do not work faultlessly,
get the saw serviced before using it.
Damaged parts, sticky deposits or masses of
wood shavings lead to delayed operation of
the bottom safety cover.
c) If you plunge cut at angles other than
right angles, secure the guide plate of
the saw to prevent sliding sideways.
Lateral movement can lead to jamming of the
saw blade and therewith to kickback.
d) Do not put the saw done on the bench
or on the floor without covering the
saw blade with the safety cover. An
unprotected saw blade moves the saw against
the direction of the cut, and cuts everything
that is in the way. Please keep in mind that the
saw runs on.
Please ensure that only persons over 16 years
of age operate this appliance according to the
instructions in this operating instructions!
Note: Do not use grinding discs. Injuries and dam-
age to objects could result.
Safety recommendations for the
correct use of superabrasives
a) General
Superabrasives are breakable and shall therefore
be handled with utmost care! The use of damaged
or improperly mounted or used superabrasives is
dangerous and can cause serious injuries.
b) Delivery, handling and storage
Superabrasives shall be handled and transportes
with care. Superabrasives shall be stored in such a
manner that they are not subjected to mechanical
damages and harmful environmental influences.
Avoid the danger of death from
electric shock:
Regularly check the condition of the appliance,
mains cable and plug. Do not operate appli-
ances with damaged parts of that description.
Never open the appliance. Damaged appli-
ances, mains cables or plugs main danger to
life due to electric shock. Always have repairs
or parts exchanges carried out at the service
centre or by an electrician.
Do not operate the appliance when it is wet or
in damp environments.
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside IAN 79416 PTS 480 A1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside IAN 79416 PTS 480 A1 in de taal/talen: Frans als bijlage per email.

De handleiding is 1,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Parkside IAN 79416 PTS 480 A1

Parkside IAN 79416 PTS 480 A1 Gebruiksaanwijzing - Nederlands, Deutsch, English - 34 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info