745068
41
Verklein
Vergroot
Pagina terug
1/50
Pagina verder
GB
- 41 -
stand squarely and solidly so that you can
keep control of the equipment and maintain
your posture even if the equipment makes un-
expected movements.
Let go of the trigger lever (2) if the air supply
is interrupted.
Wear the necessary protective clothing, in
particular impact-proof safety goggles, ear
muffs and safety gloves, when working with
the chisel hammer.
2.4 Dangers due to repetitive movements
Working with the chisel hammer can result in
disorders in the hands, arms, shoulders, neck
and other parts of the body.
When using the equipment, be sure to adopt
a comfortable posture and change your
posture repeatedly in order to avoid physical
complaints.
Stop using the equipment if you experience
numbness, tingling, pain or whitening of the
skin on your fingers or hands, and consult a
doctor.
2.5 Dangers due to accessories
Important: Disconnect the equipment from the
compressed air supply before you carry out
any maintenance or cleaning work.
Only use accessories and consumables of a
size and type recommended by the manu-
facturer.
Do not use the chisel as a hand tool. The chi-
sels were designed specially for use with a
chisel hammer.
Use only sharp chisels. Blunt chisels need
higher pressure, can break and will increase
vibrations.
Do not cool hot tools in water. This may result
in damage.
Do not use the chisel as a levering tool.
Never touch the chisel during and after wor-
king with the equipment. Fingers and hands
may be injured. The chisel can become hot.
Do not use any defective items of equipment.
Replace defective parts. This will help to pre-
vent injuries.
2.6 Dangers at the workplace
Slipping, stumbling and falling are the main
reasons for injuries at the workplace. Beware
of slippery surfaces which result from using
the equipment and also beware of tripping
over the air hose.
Beware of hidden dangers such as electric
cables or gas and water pipes.
This equipment is not insulated against contact
with an electric cable. It is vital to avoid all
contact with electric cables. The equipment is
not suitable for use in explosive atmospheres.
The equipment is not suitable for use in ex-
plosive atmospheres. Sparks may be created
when you work with this equipment. It is im-
portant therefore that you never work with this
equipment near combustible materials, liquids
or gases.
2.7 Dangers due to dust and vapors
Depending on the material you wish to
process, dusts and gases may arise that are
a health hazard for the user (for example
causing cancer, birth defects, asthma and /
or dermatitis).
Make sure that escaping air whirls up as little
dust as possible.
Wear a suitable protective dust mask which
complies with the particular case of applica-
tion and the generally applicable safety rules.
2.8 Dangers due to noise
Noise can cause permanent damage to your
hearing. Unprotected exposure to high levels
of noise can result in loss of hearing and other
problems such as tinnitus (ringing, buzzing,
whistling or droning noises in your ears).
Wear ear-muffs.
To keep noise and vibration levels as low as
possible, follow the maintenance and opera-
ting instructions in the manual. For example,
vibration-damping material used as an inter-
mediate layer when working on sheet metal
can also reduce noise.
Anleitung_4139031_LB2.indb 41Anleitung_4139031_LB2.indb 41 03.04.12 10:1403.04.12 10:14
41

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside IAN 73790 PDMH 4500 A2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside IAN 73790 PDMH 4500 A2 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info