749299
32
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
32 GB/IE
zStart up
Note: The welding tool is suitable for weld-
ing with electrodes.
Use electrode retaining clips without pro-
truding retaining screws meeting today‘s
safety standards.
Be sure the ON / OFF switch
9
is set to
position “O“ (“OFF“) or the main supply
cable
10
is not plugged into the mains
socket.
Connect the welding cables according
to polarity and electrode manufacturer
instructions.
To do so, connect the port of the earth
terminal
4
(black) with the appropriate
outlet on the inverter welding machine
(black, marked with “-”).
Connect the port of the electrode holder
5
(red) with the appropriate outlet on
the inverter welding device (red, marked
with “+”),
Put on suitable protective clothing
according to provisions and prepare the
work area.
Connect the earth terminal
4
to the
workpiece.
Secure the electrode in the electrode
holder
5
.
Switch on the device by setting the ON /
OFF switch
9
to the “I“ (“ON“) position.
Set the welding current with the control
knob
3
according to the electrode used.
Note: Please see the table below for the
welding current according to electrode
diameter.
Ø Electrode welding current
1.6 40 – 55 A
2.0 55 – 65 A
2.5 65 – 80 A
3.2 80 – 120 A
Note: For the welding currents of 80 A to
120 A, please use welding electrodes with
a diameter of 3.2 mm (not included in the
scope of delivery).
Attention: Do not bring the earth
terminal
4
and the electrode holder
5
/
electrodes into direct contact with one
another.
Attention: When welding with elec-
trodes (MMA - manual metal arc
welding) the electrode holder
5
and the
earth terminal
4
lug must be connected
to positive (+) or negative (-) according
to the welding rod specifications.
Hold the welding shield
7
in front of
your face and begin welding.
To stop working, set the ON / OFF
switch
9
to the “O“ (“OFF“) position.
ATTENTION!
When the thermal overload protection is
triggered, the yellow control lamp
2
lights
up. In this case, no further welding is
possible. The device is still in operation for
the fan to cool the device. As soon as the
device is ready for use again, the yellow
control lamp
2
switches off automatically.
The welding function is now given again.
ATTENTION!
Be careful not to rub the welding rod against
the workpiece. This could damage the
workpiece and make it difficult to strike an
arc. Maintain the proper distance to the
workpiece after striking the arc. The distance
should correlate to the diameter of the
welding rod used. Maintain this distance as
accurately and consistently as possible whilst
welding. The angle between the welding
rod and the working direction should be
between 20 and 30 °.
Start up
32

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside IAN 310850 PISG 120 A1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside IAN 310850 PISG 120 A1 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info