748054
19
Verklein
Vergroot
Pagina terug
1/73
Pagina verder
PDFP 500 C3
16 GBIE
Adjusting the airflow
NOTE
We recommend starting with the airflow set
to maximum. To do this, open the airflow
regulator to maximum as described below
in the section "Increasing the airflow".
Increasing the airflow:
NOTE
Increasing the airflow is generally advisable
if the dispersion is too coarse.
Turn the airflow control anticlockwise.
Decreasing the airflow:
NOTE
Decreasing the airflow is generally advisable
if the paint mist is too strong.
Turn the airflow control clockwise.
Maintenance and cleaning
WARNING! RISK OF INJURY!
Disconnect the appliance from the
compressed air supply.
NOTE
Thorough cleaning after every use is very
important for safety and operation. Other-
wise, the needle could get blocked and
proper operation of the appliance cannot
be guaranteed.
Wear suitable gloves when cleaning.
Do not use any hydrocarbon-based solvents
like benzene, ethyl chloride, etc., as these could
trigger chemical reactions with some of the
materials in the paint spray gun. This can lead
to dangerous reactions.
CAUTION!
Never immerse the paint spray gun com-
pletely in solvent.
After every use, squirt thinners (only outside
– risk of explosion!) or water through the
appliance.
To clean the housing, the nozzle head and the
spray holes inside it, use the supplied cleaning
brush or a cloth. Never use petrol, solvents or
cleansers which can damage plastic.
First, unscrew the stroke limiter screw by turning
it in an anticlockwise direction.
Remove the spring .
Remove the needle using pliers (see fig. A).
Clean the needle carefully with the brush
(see fig. B).
Replace the needle in the paint spray gun.
Push the spring onto the end of the needle .
Screw the stroke limiter screw tight by turning
it clockwise .
Screw the flow cup anticlockwise off the
spray gun.
Remove the filter as shown in fig. C and
clean it with the cleaning brush.
Also clean the screw thread of the flow cup
using the cleaning brush (see fig. D).
Replay the filter in the spray gun (see fig. C)
and screw the flow cup clockwise firmly
onto it.
For rust protection purposes, you can spray a
little sewing machine oil through the spray gun
after cleaning.
Oil all moving parts from time to time.
After cleaning the needle, the thread and seal
must be lightly greased with a suitable lubricant.
Do not use any silicon-based lubricants.
Store compressed-air appliances only in dry
rooms.
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside IAN 300488 PDFP 500 C3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside IAN 300488 PDFP 500 C3 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 4,99 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info