748082
18
Verklein
Vergroot
Pagina terug
1/82
Pagina verder
Introduction / Safety
Technical data
Dimensions: 240 x 235 x 58 mm
(L x H x W)
Weight
(without fasteners): 1197 g
Trigger type: Compressed air
Maximum permissible
pressure: 8 bar
m
a
x
.
8
b
a
r
Recommended pressure
range: 4 to 7 bar
Air consumption per
drive in process: approx. 0.09 litre
Recommended lubricant: Compressed air
special oil
Loading capacity: 100 pcs
Nail lengths: 15 mm, 20 mm,
5,7 mm
10-40 mm
25 mm, 30 mm,
32 mm, 35 mm,
38 mm, 40 mm,
45 mm, 50 mm
Staple lengths: 10–40 mm
Staple width: 5,7 mm
Recommended
Internal hose diameter: 9 mm
Compressed air quality: Cleaned,
oil-misted and
condensate-free
Special references
Instructions
The following standard is applicable to fastener
driving tools as per EN 792-13:2000 „Hand-held
non-electric power tools – safety requirements –
Part 13: Fastener driving tools“.
The standard requires that
Only those fasteners which are specified in the
operating instructions (see technical data) shall
be used in fastener driving tools. The fastener
driving tool and the fasteners specified in the
operating instructions are to be considered as
one unit safety system.
Quick-action couplings shall be used for
connection to the compressed air system and
the non-sealable nipple must be fitted at the
tool in such way that no compressed air re-
mains in the tool after disconnection.
Oxygen or combustible gases shall not be
used as an energy source for compressed air
operated fastener driving tools.
Fastener driving tools shall only be connected
to an air-supply where the maximum allowab-
le pressure of the tool cannot be exceeded by
more than 10 %; in the case of higher pressu-
res, a pressure reducing valve which includes a
downstream safety valve shall be built into the
compressed air supply.
Only spare parts specified by the manufacturer
or his authorized representative shall be used
in the repair of fastener driving tools.
Repairs shall be carried out only by the ma-
nufacturers’ authorized agents or by other
experts, having due regard to the information
given in the operating instructions.
NOTE
Experts are those who, as a result of professional
training or experience, have sufficient expertise
in the field of fastener driving tools and sufficient
familiarity with relevant government industrial pro-
tection provisions, accident prevention regulations,
directives, and generally recognized technical re-
gulations (e.g. CEN and CENELEC-standards),
to be able to assess the safe condition of fastener
driving tools.
Stands for mounting the fastener driving tools
to a support, for example to a work table,
shall be designed and constructed by the stand
manufacturer in such a way that the fastener
driving tools can be safely fixed for the inten-
ded use, thus for example avoiding damage,
distortion, displacement.
Special fields of application for the fastener driving
tools may require the observance of additional
provisions and regulations (for example working
in areas subject to an explosion hazard).
5 DE/AT/CH
Inhaltsverzeichnis
Legende der verwendeten Piktogramme .........................................................Seite 6
Einleitung ........................................................................................................................................Seite 6
Bestimmungsgemäße Verwendung ...................................................................................................Seite 6
Ausstattung ..........................................................................................................................................Seite 6
Lieferumfang .......................................................................................................................................Seite 6
Technische Daten ................................................................................................................................Seite 7
Sicherheit ........................................................................................................................................Seite 7
Allgemeine Sicherheitshinweise ........................................................................................................Seite 7
Vor der Inbetriebnahme ....................................................................................................Seite 8
Gerät aufstellen ..................................................................................................................................Seite 8
Inbetriebnahme ........................................................................................................................Seite 8
Heizstufen und Ventilator ein- / ausschalten .....................................................................................Seite 8
Temperatur einstellen..........................................................................................................................Seite 9
Gerät ausschalten ..............................................................................................................................Seite 9
Überhitzungsschutz ............................................................................................................................Seite 9
Fehlerbehebung ........................................................................................................................Seite 10
Wartung, Reinigung und Lagerung .........................................................................Seite 10
Service ...............................................................................................................................................Seite 10
Garantie ...........................................................................................................................................Seite 11
Entsorgung.....................................................................................................................................Seite 11
Original-EG-Konformitäts erklärung / Hersteller .........................................Seite 12
277044_par_ROWI_Heizgeblaese_content_AT.indd 5 13.07.16 08:49
Introduction / Special references
Introduction / Special references
GB/IE/NI 19
Introduction / Special references
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside IAN 300290 PDT 40 E4 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside IAN 300290 PDT 40 E4 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 7,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info