Handleiding Parkside IAN 282494 PWSA 20 Li A1 (pagina 30 van 134) (Nederlands, Duits, Engels, Frans, Portugees, Spaans)

746159

Verklein

Vergroot

Pagina terug

1/134

Pagina verder

PWSA 20-Li A1

│

IE │ 25 ■

l) Never put the power tool down until the

accessory tool being used has come to a

complete standstill. The rotating accessory tool

could come into contact with the surface and

cause you to lose control of the power tool.

m) Do not leave the power tool running whilst

carrying it. Accidental contact between your

clothing and the rotating accessory tool could

lead to a physical injury.

n) Clean the ventilation slits of your power tool

regularly. The engine fan draws dust into the

housing, and so a strong accumulation of metal

dust can cause electrical hazards.

o) Never use the power tool in the vicinity of

inﬂammable materials. Sparks can ignite these

materials.

p) Do not use any accessory tools which require

liquid coolant. The use of water or other liquid

coolants may lead to an electric shock.

Kickback and corresponding safety

instructions

Kickback is a sudden reaction caused when a

rotating accessory tool, e.g. grinding disc, grinding

plate, wire brush, etc., catches or jams. Catching or

jamming leads to an abrupt stop of the rotating ac-

cessory tool. If this happens, an uncontrolled pow-

er tool turns rapidly against the direction of rotation

of the accessory tool caught in the blockage.

If, for example, a grinding disc catches or jams in a

workpiece, the edge of the grinding disc projecting into

the workpiece can get caught and break oﬀ the grind-

ing disc or cause a kickback. The grinding disc can

then ﬂy in the direction of the operator or away from

him, depending on the direction of rotation of the disc

at the blockage. This can also break grinding discs.

A kickback is caused by incorrect use or misuse

of the power tool. This can be avoided by taking

proper precautions as described below.

a) Hold the power tool ﬁrmly in both hands and

position your body and arms so they can

absorb the force of a kickback. Always use

the additional handle, if available, so that

you have the maximum possible control over

the kickback force or reaction forces at full

speed. By taking adequate precautions, the

operator can stay in control of the kickback

and reaction torques.

b) Never hold your hand close to a rotating

accessory tool. The accessory tool could hit

your hand in the event of a kickback.

c) Avoid having any part of your body in the

region in which the power tool is likely to

move in event of a kickback. The kickback will

force the power tool in the opposite direction to

the direction of rotation of the grinding disc at

the blockage.

d) Take special care when working near corners,

sharp edges, etc. Avoid allowing the accessory

tool to bounce back from the workpiece or jam.

The rotating accessory tool is more likely to jam in

corners or sharp edges or if it rebounds oﬀ them.

This can cause a loss of control or kickback.

e) Do not use chains or toothed saw blades.

Such accessories often cause a kickback or loss

of control over the power tool.

Special safety instructions for grinding

and abrasive cutting

a) Use only the grinding accessories approved

for your power tool and the appropriate blade

guard for these grinding tools. Grinding tools

that are not designed for the power tool cannot

be suﬃciently shielded and are unsafe.

b) Oﬀset grinding discs must be ﬁtted so that the

grinding surface does not protrude over the

level of the blade guard edge. An improperly

ﬁtted grinding disc which protrudes over the level

of the blade guard edge cannot be properly

guarded.

c) The blade guard must be securely mounted

on the power tool and adjusted to ensure

maximum safety so that the smallest pos-

sible amount of the grinding tool is open to

the operator. The blade guard is designed to

protect the operator from fragments, accidental

contact with the grinding tool and sparks that

could ignite clothing.

d) Grinding tools should only be used for the

recommended applications.

For example: Never grind with the side sur-

face of a cutting disc. Cutting discs are designed

to remove material with the edge of the disc.

Any lateral application of force on these grinding

tools can lead to breakage.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Parkside IAN 282494 PWSA 20 Li A1 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info