745543
16
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
17 GB/IE
Introduction Introduction / Safety notices
the work location. Noise development at the work
location depends e.g. on the work environment, the
work piece, the work piece support and the number
of fastener driving processes.
In accordance with conditions at the work location,
individual noise reduction measures may need to
be carried out, such as placing the work piece on
a noise-suppressing surface, clamping or covering
to prevent work piece vibration and adjusting to the
minimum pressure required by the work process. In
certain cases, wearing personal hearing protection
is require.
Wear hearing protection!
Total vibration values in accordance with
ISO 28927-10, EN 12096:
Vibration emission value a
h
= 69.83 m / s
2
Uncertainty K = 1.5 m / s
2
Scope of delivery
1 Needle scaler (head preinstalled)
1 Threaded plug nipple
1 Allen key
1 Instructions for use
Safety notices
General safety rules
To connect the device to the air hose, never
point the front end (needle head) of the tool at
yourself or others.
Never point the tool at yourself or others.
In the cases of multiple hazards the safety in-
structions must be read and understood before
attaching, operating, repairing and exchanging
accessories and before working near the
non-rotating, percussive machine. Otherwise
severe bodily injuries may result.
The non-rotating, percussive machine should
only be set up, adjusted and used by qualified
and trained users.
Never modify the non-rotating, percussive
machine. Modifications may reduce the effec-
tiveness of safety measures and increase oper-
ator risks.
Do not lose the safety instructions – hand them
to the operator.
Never use a damaged non-rotating, percussive
machine.
Regularly maintain machines to verify all re-
quired rated values and markings required by
ISO 11148 are legible on the machine. If nec-
essary, the employee/user must contact the man-
ufacturer for replacement labels for markings.
Risks due to projected parts
Disconnect the non-rotating, percussive ma-
chine from the power supply before replacing
the inserted tool or accessories.
If the work piece, one of the accessories, or the
tool itself breaks, parts may be projected at a
great speed.
Always wear eye protection when operating
the non-rotating, percussive machine. The level
of required protection required should be as-
sessed individually for each application.
When working overhead, a safety helmet must
be worn.
In this case, the risk to other people must also
be assessed.
It must be ensured that the work-piece is prop-
erly secured.
Only operate the machine with the machine tool
secured in the machine with a suitable retainer.
To prevent injuries, any worn, broken or bent
parts of the retainer must be replaced.
Before switching on the machine, the machine
tool must be firmly applied to the surface you
will be working on.
Operating hazards
During uses, the operator‘s hands may be ex-
posed to hazards such as impact, cuts, abrasion
and heat. Wear suitable gloves to protect hands.
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside IAN 275683 PDNE 4000 A1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside IAN 275683 PDNE 4000 A1 in de taal/talen: Nederlands, Duits, Engels als bijlage per email.

De handleiding is 1,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Parkside IAN 275683 PDNE 4000 A1

Parkside IAN 275683 PDNE 4000 A1 Gebruiksaanwijzing - Français - 33 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info