745935
10
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
10
GB IE NI
poorly maintained power tools.
Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are less
Iikely to bind and are easier to control.
Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working condi-
tions and the work to be per-
formed. Use of the power tool for op-
erations different from those intended
could result in a hazardous situation.
Carefully inspect the area to be cut
and remove all wires or other foreign
bodies.
Service
Have your power tool serviced
by a qualied repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
Safety notices for milling
cutters
Warning! Milling can result in
the formation of dusts hazardous to
health (e.g. arising from materials
with paints containing lead, materi-
als containing asbestos or some
wood types), which can pose a risk
to the operator or persons nearby.
Make sure that the workplace is
well ventilated. Always wear safety
goggles, safety gloves and respira-
tory protection. Attach a dust ex-
traction system.
Hold the power tool on the in-
sulated handle surfaces, as the
cutter might hit its own power
cable. Contact with a live wire can
also cause a charge in metal parts of
the appliance and result in an electric
shock.
Fasten and secure the work-
piece by means of clamps or
with another method on a sta-
ble underground. If you hold the
workpiece only with your hand or
against your own body, it will stay
instable and this can lead to a loss of
control.
The permissible rotation speed
of the attachment tools must be
at least as high as the highest
rotation speed indicated on the
power tool. Accessories that run
faster than the permissible speed can
be destroyed.
Cutters and other accessories
must be exactly matching the
tool holder (collet chuck) of your
power tool. Attachment tools that
are not exactly matching the tool hold-
er of the power tool rotate unevenly, vi-
brate very strongly and can ultimately
lead to a loss of control.
Ensure that the cutter is assem-
bled correctly. A cutter that is not
assembled correctly can break during
the milling or be ejected and present a
risk of injury.
Move the power tool against
the workpiece only when it is
turned on. Otherwise, there is a risk
of kickback if the attachment tools jam
in the workpiece.
Do not put your hands in the
cutting area and neither on the
cutter. Hold the additional han-
dle or the motor housing with
your other hand. When holding
the milling cutter with both hands, they
cannot be injured by the cutter.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside IAN 275390 POF 1200 B2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside IAN 275390 POF 1200 B2 in de taal/talen: Nederlands, Duits, Engels, Deens als bijlage per email.

De handleiding is 4,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Parkside IAN 275390 POF 1200 B2

Parkside IAN 275390 POF 1200 B2 Gebruiksaanwijzing - Français, Italiano - 84 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info