745345
10
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
10
GB IE
only by an authorised customer
service centre. Replace damaged
extension cables. This will ensure that
the power tool remains safe.
Store unused power tools in a
safe place. The storage place
should be dry and lockable. This
prevents the power tool from being dama-
ged as a result of being stored or opera-
ted by inexperienced people.
Never leave the tool before it has
come to a complete standstill. After-
running bits can cause injury.
Do not use the power tool with
a damaged cable. Do not touch
the damaged cable and pull the
mains plug if the cable is dama-
ged while working. Damaged cables
increase the risk of electric shock.
The device is unsuitable for processing of
foods.
Edit not work pieces that you can not sure
retain. Especially round or uneven
workpieces.
Assembly
The bench drill is supplied disassembled.
Clean the column tube (15), baseplate
(17), drilling bench (20), vice (21) and
the drill chuck (4) beforehand, with a dry
cloth.
1. Place the column tube (15) on the ba-
seplate (17). Bolt the column tube (15)
to the baseplate (17) with the three as-
sembly srews (16) supplied. Tighten the
assembly srews (16) moderately tight
so that the threads in the baseplate (17)
do not strip.
2. Place the drilling bench (20) on the co-
lumn tube (15). Push the drilling bench
(20) into a lower position. Screw the
clamping bolt (24) into the clamp of the
drilling bench and x the drilling bench
(20) in a lower position.
3. Place the vice (21) on the drilling bench
(20) and screw it with the enclosed
mounting bolts (23) tightly to the drilling
bench (20).
4. Place the motor unit (14) on the column
tube (15) and secure the motor unit
(14) with the two clamping screws (12)
to the side with the allen key supplied
(30).
5. Bolt the three drill lifting arms into the
spindle guide (9). Tighten the three hole
lifting arms with a spanner (SW 6).
6. Release the small nut from the depth
stop (3).
I. Insert this nut into the protective device
(7).
II. Put the safety device (7) on the upper
part of the drill spindle.
III. secure the safety device with the clam-
ping bolt supplied.
IV. Insert the depth stop (3) through the
hole in the fence.
V. Screw the depth stop (3) with the safety
device (7).
Centrally align the depth stop (3) into
the bore of the fence.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Parkside IAN 270414 PTBM 500 B2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Parkside IAN 270414 PTBM 500 B2 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 3,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info