458602
29
Verklein
Vergroot
Pagina terug
1/175
Pagina verder
2 Description
2-12 FrameSaver NP 110 Users Manual - Installation Guide 980-001-0240B
November
2000
WAN Management
IP Address
FrameSaver NP 110 utilizes one IP Address on the dedicated, network-facing Wide
Area Network (WAN) management channel. This address is embedded within the var-
ious communications protocol stacks used for SNMP, Telnet and PPP. The units WAN
Management IP Address may be automatically learned from the first message received
on the management PVC, or it can be set via the local or remote Console Port.
When optioned with ISDN, FrameSaver NP 110 can have several communications
paths that allow the management channel to connect to the frame relay network in dif-
ferent places. Each of these connection points could result in the management PVC
routing through different IP sub-nets to reach the Network Control Center, or it may be
desirable to have the FrameSaver NP 110 appear as a logically different object in the
SNMP manager, especially if static routing and dedicated backup ports are utilized.
The setting/learning of these additional IP Addresses is described in detail in Section
4, Configuration, in this manual.
FrameSaver NP 110 will retain in Non-Volatile Memory (NVM), a separate WAN IP
Address for each connection point. All communications via OOB PPP (Out-Of-Band
Point-to-Point Protocol) will utilize whatever IP Address is in effect depending on how
the unit is currently connected to the network. There are several options for establish-
ing the WAN IP Address within the FrameSaver NP 110.
When the unit is shipped from the factory or when NVM is cleared on initial installa-
tion, the WAN IP Address for each connection point is set to 000.000.000.000, which
indicates no address is known.
The WAN IP Address to be used on the T1 link is automatically learned from the
first valid IP message received over the units management PVC. Learning will take
place as long as the value of the WAN IP Address in NVM is 000.000.000.000. Once
the IP Address is set or learned it is retained and used until the NVM is cleared or an-
other address is manually set.
Software
Download
The FrameSaver NP 110 system software (firmware) is stored in flash memory. A new
version of the software can be downloaded to the unit for software upgrade, or for res-
toration in the event an error is detected in the flash storage.
A description of the software download process is provided in Section 5, Diagnos-
tics, in this manual.
29

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Paradyne-FrameSaver-NP-110

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Paradyne FrameSaver NP 110 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Paradyne FrameSaver NP 110 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info