67
Chapter 4
Programmable Functions on the Base Unit
Base Unit PIN
with the Handset
Setting the 4-digit Base Unit PIN
You can program a 4-digit base unit PIN (Personal Identification Number). The factory preset is 0000.
Changing the PIN may prevent the unauthorised use of your unit by another person.
—Cancelling a Handset Registration in the
Base Unit (p. 97)
—Reset the Base Unit Settings (p. 75)
4 Enter the new 4-digit base unit PIN
TWICE.
•A beep sounds.
•The display will return to “Setting
Base”. To return to the standby mode,
press .
—Ringer Mode Selection (p. 68, 69)
—Selecting Time Break Recall/Earth (Option)
Mode (p. 71)
—Selecting the Pause Timing (p. 72)
—Call Restriction (p. 73)
1 Press .
2 Press or until the arrow points
to “Setting Base”, then press .
•“Input Command” is displayed.
3 Press , then enter the current 4-digit
base unit PIN.
•The factory preset is 0000.
•If 5 beeps sound in step 3, the entered 4-digit
base unit PIN is incorrect. Enter the correct
4-digit base unit PIN.
•You can exit the programming mode any time
by pressing .
Input Command
5
----
Input Command
5
---- ----
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
Once you have programmed the 4-digit base unit PIN, you cannot confirm it. We recommend you
to write down the 4-digit base unit PIN. If you forget it, please consult your nearest Panasonic
Customer Care Centre.
You need to enter the 4-digit base unit PIN when using the following functions.
4-digit base unit PIN
KX-TCD735EM(E)-3(50~75) 01.10.22 16:15 Page 67
