31
Chapter 2
Cordless Telephone
with the Handset
Storing Caller List Information into the Handset
Phonebook
You can store the Caller List information into the phonebook. You can categorise the caller information
in the phonebook up to 9 categories, then you can select one of 3 display backlight colours and one of
20 ringer types for each private category–Private Category Feature (p. 33).
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
1 Press or .
•The most recent caller’s information is
displayed.
2 Press repeatedly to search from the
most recent call or press repeatedly
to search from the oldest call until the
arrow points to the caller information
you desire to store.
3 Press .
4 While “Save Phonebook” is at the
arrow, press .
•The display shows the number of
remaining phonebook items, then
“<Enter name>”.
5 Enter the name up to 16 characters with
the dialling buttons, , or .
•To select characters, see page 35.
•If the phone number requires editing, press
and see step 5 on page 29. When
finished, press then go to step 7.
6 Press twice.
7 Press or to select the desired
private category number 1 to 9 or OFF,
then press .
8
While
“Save
” is at the arrow, press
.
•A beep sounds and “Saved”
is displayed.
•The display will return to caller list. You can
continue the storing procedure begin with
step 3. To return to the standby mode,
press or wait for 60 seconds.
•If a pause is required for dialling, press .
A pause can be stored in a phone number
counting as a digit (p. 48).
•You can exit the programming mode any time
by pressing .
•If the display shows“Memory Full” in step
3, the display will return to the standby mode.
You must clear the other caller information in
the phonebook (p. 38).
<Enter Name>
0123456789
KX-TCD735EM(E)-1(02~31) 01.10.22 16:14 Page 31
