Answering Calls
24
Paging/Intercom
In multi-unit user operation, conversation between handsets is available with intercom feature (p. 98).
Make sure that the power is ON (p. 15), and the unit is in the standby mode.
Paging the Handset from the Base Unit (Handset Locator, All paging)
Using this feature, you can locate a misplaced handset.
1 On the base unit, press .
•All handset(s) ring(s) for approx. 60 seconds and “ ” flashes. To stop paging, press
on the base unit or wait for 60 seconds.
2 For intercom, press , to , , , or on the handset then talk.
To end the intercom, press on the handset or press or on the base unit.
Paging the Handset from the Base Unit (Individual Paging)
1
On the base unit, press and enter the handset number you desire to page, then press .
•The selected handset rings for approx. 60 seconds and “ ” flashes. To stop paging, press
on the base unit or wait for 60 seconds.
2
For intercom, press , to , , , or on the handset then
talk. To end the intercom, press on the handset or press or on the base unit.
Paging the Base Unit from the Handset
1
Press then on the handset.
•The base unit rings and “ ” flashes. To stop paging, press on the handset.
2
For intercom, press or on the base unit then talk. To end the intercom,
press or on the base unit or press on the handset.
Selecting the Receiver Volume (8 levels) During Conversation
Press to decrease volume, or press to increase volume.
•Each time you press or , the volume level will change.
•The display will return to the talk mode after speaker volume selection.
Ex. Receiver volume: 8
Receiver Volume
LOW
123456
HIGH
with the Base Unit
For basic answering a call operation with the base unit, see page 16.
If you subscribe to a Caller ID service, the caller information will be displayed after the first ring (p. 26).
KX-TCD735EM(E)-1(02~31) 01.10.22 16:14 Page 24
