67
1
E
N
G
L
I
S
H
CQ-D5501N
66
65
E
N
G
L
I
S
H
CQ-D5501N
66
■ MP3
There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc. For MP3, refer to the
description about MP3.
Playing VBR (Variable Bit Rate) files may cause sound skipping.
aPlay Non-VBR files.
Sound skipping or
noise
The playability of some CD-R/RWs may depend on the combination of media,
recording software and recorder to be used even if these CD-R/RWs are
playable on other devices such as a PC.
aMake CD-R/RWs in a different combination of media, recording software
and recorder after referring to the description about MP3.
The CD-R/RWs that are
playable on other
devices are not
playable on this unit.
The disc has unplayable formatted data.
aRefer to the description about MP3 for playable sound data except CD-
DA (i.e. music CD).
No playback or disc
ejected
Problem
Possible cause
a
Possible solution
Troubleshooting
(continued)
■ CD
Something such as a peeled label obstructs the disc coming out.
aPress and hold the [OPEN] for more than 2 seconds when the face plate
is open (disc forced ejection). In case that the disc forced ejection does
not work, consult your dealer.
The microcontroller in the unit operates abnormally due to noise or other fac-
tors.
aUnplug the power cord and plug it again. In case the unit is still out of
order, consult your dealer.
Disc unejectable
The unit is not sufficiently secured.
aSecure the unit to the console box.
The unit is tilted at over 30˚ in the front-to-end direction.
aMake the angle 30˚ or less.
Sound skipping due to
vibration
There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc.
Sound skipping or
noise
The disc is inserted upside down.
aInsert a disc correctly.
There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc.
No playback or disc
ejected
Problem
Possible cause
a
Possible solution
Note:
¡Refer to “Notes on MP3”. (a Page 28)
■ Radio
The contact of the battery lead is poor, or the battery lead is not always pow-
ered.
aMake sure that the battery lead is connected securely, and preset sta-
tions again.
Preset stations cannot
be stored.
The number of receivable stations is less than 6.
aMove to an area where receivable stations number is maximum, and try
presetting.
The number of auto
preset stations is less
than 6.
The LOCAL mode is active.
aCancel the LOCAL mode.
Only strong signal sta-
tions can be received.
The MONO mode is active.
aCancel the MONO mode.
FM Stereo broadcast is
received only in mono.
Antenna installation or wiring of antenna cable is faulty.
aCheck whether the antenna mounting position and its wiring are correct.
In addition, check to see whether the antenna ground is securely con-
nected to the chassis.
No power is supplied to the antenna amplifier (when using a film antenna,
etc.).
aCheck the wiring of the antenna battery lead.
Poor reception or
noise
Problem
Possible cause
a
Possible solution
There is little difference in receiving conditions between the current station
and AF stations. Update of AF list ended in failure.
aWait until the AF list is successfully updated. For unstable reception,
tune in to a stable station by the hand.
An AF station cannot
be received even if AF
indicator lights.
The unit received a station broadcasting time that is not appropriate for you,
or the unit is receiving a station that does not broadcast time.
aReceive a station broadcasting time that is appropriate for your area, or
adjust CT manually.
The clock time (CT)
does not indicate
accurately.
Any specified PTY programmes cannot be received. There is no desired pro-
gramme being broadcast in your area.
aSelect another PTY, or wait until a desired programme starts.
“NONE” appears when
selecting PTY.
When the station changed between programmes, the unit could not receive
the PTY code.
aAn appropriate programme is searched for and tuned into after receiv-
ing a corresponding PTY code. Therefore, wait for a while.
Receiving programmes
differs from PTY that
was already set up.
A PS code cannot be received for the reason of bad receiving conditions, etc.
aA PS code appears if it is received. Wait for a while until conditions
change.
PS does not appear
even if an RDS station
is tuned in to. (“NO
PS” appears.)
Problem
Possible cause
a
Possible solution
■ RDS
