597888
23
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
23
Troubleshooting
Troubleshooting (Basic)
Follow the instructions below when a problem has occurred. There is also an advanced troubleshooting guide in the
“Reference Manual”. For a software problem, refer to the software’s instruction manual. If the problem persists, contact
Panasonic Technical Support. You can also check the computer’s status in the PC Information Viewer
(
è
Reference Manual “Troubleshooting (Advanced)”).
Starting Up
Cannot start up.
The power indicator or battery
indicator is not lit.
l
Connect the AC adaptor.
l
Remove the AC adaptor, and then connect it again.
l
If a device is connected to the USB port, disconnect the device, or set [USB Port]
or [Legacy USB Support] to [Disabled] in the [Advanced] menu of the Setup Utility.
l
Check the [UEFI Boot] setting of the Setup Utility. [UEFI Boot] should be set to [Enabled].
You have forgotten the pass-
word.
l
Supervisor Password or User Password: Contact Panasonic Technical Support.
l
Administrator password:
If you have a password reset disk, you can reset the administrator password. Set
the disk and enter any wrong password, then follow the on-screen instructions
and set a new password.
If you do not have a password reset disk, install (
è
page 19) and set up Win-
dows, and then set a new password.
“Remove disks or other me-
dia. Press any key to restart”
or a similar message ap-
pears.
l
A oppy disk is in the drive and it does not contain system startup information. Re-
move the oppy disk and press any key.
l
If a device is connected to the USB port, disconnect the device, or set [USB Port]
or [Legacy USB Support] to [Disabled] in the [Advanced] menu of the Setup Utility.
l
If the problem persists after removing the disk, it may be a ash memory failure.
Contact Panasonic Technical Support.
Windows startup and opera-
tion is slow.
l
Start the Setup Utility (
è
Reference Manual “Setup Utility”) to return the Setup
Utility settings (excluding the passwords) to the default values. Start the Setup Util-
ity and make the settings again. (Note that the processing speed depends on the
application software, so this procedure may not make Windows faster.)
l
If you installed a resident software after purchase, turn off the residence.
The date and time are incor-
rect.
l
Make the correct settings.
A
Open the Control Panel.
B
Touch [Clock, Language, and Region] - [Date and Time].
C
Touch [Change time zone…].
D
Select the time zone, then touch [OK].
E
Touch [Change date and time…], then set the date and time.
l
If the problem persists, the internal clock battery may need to be replaced. Contact
Panasonic Technical Support.
l
<Only when connected to Cradle>
When the computer is connected to LAN, check the date and time of the server.
l
The 2100 A.D. or later year will not be correctly recognized on this computer.
[Executing Battery Recalibra-
tion] screen appears.
l
The Battery Recalibration was canceled before Windows was shut down last time.
To start up Windows, turn off the computer by the power switch, and then turn on.
[Enter Password] does not
appear when resuming from
sleep/hibernation.
l
Select [Enabled] in [Password On Resume] in the [Security] menu of the Setup
Utility (
è
Reference Manual “Setup Utility”).
l
The Windows password can be used instead of the password set in the Setup Utility.
A
Add a password.
1. Display “Charm” and touch
- [Change PC settings] - [Accounts].
2. Touch [Sign-in options], and touch [Add] under “Password”.
B
Open the Control Panel, touch [System and Security] - [Power Options] - [Re-
quire a password on wakeup] and add a check mark for [Require a password].
Cannot resume.
l
One of the following operations may have been carried out. Press the power switch
to turn on the computer. Data not saved will be lost.
In sleep mode, the AC adaptor was disconnected, or a peripheral was connected
or disconnected.
The power switch was pressed for four seconds or longer to forcibly turn off the computer.
l
An error may occur when the computer automatically enters the sleep or hibernation
mode while the screensaver is active. In this case, turn off the screensaver or change
the pattern of the screensaver.
DFQW5829ZA_UT-MB_8_OI_M.indb 23 2013/11/13 13:23:25
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic UT-MB5000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic UT-MB5000 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info