597887
20
Verklein
Vergroot
Pagina terug
1/33
Pagina verder
20
Troubleshooting
Troubleshooting (Basic)
Follow the instructions below when a problem has occurred. There is also an advanced
troubleshooting guide in the “Reference Manual”. For a software problem, refer to the software’s
instruction manual. If the problem persists, contact Panasonic Technical Support. You can also check
the computer’s status in the PC Information Viewer
(è Reference Manual “Troubleshooting (Advanced)”).
Starting Up
Cannot start up.
The power indicator or
battery indicator is not
lit.
Connect the AC adaptor.
Remove the AC adaptor, and then connect it again.
If a device is connected to the USB port, disconnect the device, or set
[USB Port] or [Legacy USB Support] to [Disabled] in the [Advanced]
menu of the Setup Utility.
Check the [UEFI Boot] setting of the Setup Utility. [UEFI Boot] should
be set to [Enabled].
You have forgotten the
password.
Supervisor Password or User Password: Contact Panasonic Technical
Support.
Administrator password:
If you have a password reset disk, you can reset the administrator
password. Set the disk and enter any wrong password, then follow
the on-screen instructions and set a new password.
If you do not have a password reset disk, reinstall (è page 15) and set
up Windows, and then set a new password.
“Remove disks or other
media. Press any key
to restart” or a similar
message appears.
If a device is connected to the USB port, disconnect the device, or set
[USB Port] or [Legacy USB Support] to [Disabled] in the [Advanced]
menu of the Setup Utility.
If the problem persists after removing the disk, it may be a flash
memory failure. Contact Panasonic Technical Support.
Windows startup and
operation is slow.
Start the Setup Utility (è Reference Manual “Setup Utility”) to
return the Setup Utility settings (excluding the passwords) to the
default values. Start the Setup Utility and make the settings again.
(Note that the processing speed depends on the application software,
so this procedure may not make Windows faster.)
If you installed a resident software after purchase, turn off the
residence.
The date and time are
incorrect.
Make the correct settings.
Perform either of the following procedures.
Long touch at the bottom left corner of the desktop screen.
Slide up from the middle of the Start screen with a finger.
Touch [Control Panel].
Touch [Clock, Language, and Region] - [Date and Time].
If the problem persists, the internal clock battery may need to be
replaced. Contact Panasonic Technical Support.
When the computer is connected to LAN, check the date and time of
the server.
The 2100 A.D. or later year will not be correctly recognized on this
computer.
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic UT-MB5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic UT-MB5 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info