On screen messages ●
FAQs, etc.
69
Message Meaning / Action
Recording this channel now
The recorder is recording the programme from its own tuner. You can turn ●
the TV off and leave the equipment recording in the normal way.
Reset to Factory Shipping Condition
Completed.
Please switch off TV.
“Auto Setup” will automatically start when Mains power On / Off switch is ●
next turned On. (p. 12)
Sending Preset Data
Please wait!
Q-Link or VIERA Link channel download is in progress. ●
Software successfully updated.
Press EXIT to continue.
The software updating is finished. ●
Software update failed. Please try again
later.
Press EXIT to continue.
Perform “System Update Search Now” in System Update (p. 45). ●
If this is still unsuccessful, there may not be any new software available.
This timer will not follow the TV Guide
information
Press OK to continue, RETURN to restore
original timer
If you edit the start time or end time of Guide link recording more than ●
10 minutes, it will no longer be performed as Guide link recording. The
recording will be performed according to the time setting.
Timer already expired ! Starting time in Timer Programming is already past. Set correctly (p. 47). ●
Timer Event Due to Start
DVB 1: BBC1 has been
programmed for recording at
∗∗
:
∗∗
This message will appear 2 minutes before timer programming event due ●
to start.
Timer incorrect ! Set Start and End times in Timer Programming correctly (p. 47). ●
Timer overlap
Press OK to keep, RETURN to edit
Timer programming events are overlapped. If you press the OK button, ●
the first timer programming event will start and finish, the next timer
programming event can then start.
Tuner Locked
Please stop recording to operate
If you want to unlock, cancel Direct TV Recording (p. 54 and p. 56) or ●
Timer Programming (p. 47).
Unable to download, please check
equipment
The tape or disc is active. Stop the equipment and try again. ●
SD Card ■
Cannot read file
The file is broken or unreadable. ●
The TV does not support the format. ●
(For the applicable formats and data p. 65)
No SD card inserted Confirm SD Card is inserted correctly. ●
No valid file to play The card has no data. ●
Over 9999 pictures found.
(max. is 9999)
Maximum valid number of photos is 9,999. ●
