585479
114
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
until
2010/1/25
Operating Instructions
Before connecting, operating or adjusting this product, please read the instructions completely.
Spanish Quick Use Guide is included.
Guía para rápida consulta en español está incluida.
VQT2L14
For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or,
contact us via the web at: http://www.panasonic.com/contactinfo
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca
SD Video Camera
Model No. SDR-S50P/PC
SDR-T55P/PC
SDR-T50P/PC
SD/HDD Video Camera
Model No. SDR-H85P/PC
SDR-H85&S50&T55&T50-VQT2L14_eng.book 1 ページ 2009年12月22日 火曜日 午前10時33
2
VQT2L14
Things You Should
Know
Thank you for choosing Panasonic!
You have purchased one of the most
sophisticated and reliable products on
the market today. Used properly, we’re
sure it will bring you and your family
years of enjoyment. Please take time to
fill in the information on the right.
The serial number is on the tag located
on the back of your camera. Be sure to
retain this manual as your convenient
camera information source.
Safety Precautions
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE,
DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR
SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHALL BE PLACED ON THE APPARATUS.
USE ONLY THE RECOMMENDED ACCESSORIES.
DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN
ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO
PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING,
ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE
VENTILATION VENTS.
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 2 ページ 2009年12月22日 火曜日 午前10時33
3
VQT2L14
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
THE FOLLOWING APPLIES ONLY IN CANADA.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached installation
instructions and use only shielded interface cables with ferrite
core when connecting to computer or peripheral devices.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Declaration of Conformity
Trade Name: Panasonic
Model No.: SDR-S50P/SDR-T55P/SDR-T50P/SDR-H85P
Responsible party: Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Support Contact: Panasonic Consumer Electronics Company
1-800-211-PANA (7262)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
This Class B digital apparatus complies with Canadian ICES-003.
SDR-S50P SDR-T55P
SDR-T50P
SDR-H85P
SDR-H85&S50&T55&T50-VQT2L14_eng.book 3 ページ 2009年12月22日 火曜日 午前10時33
4
VQT2L14
Battery pack (Lithium ion battery pack)
Use the specified unit to recharge the battery pack.
Do not use the battery pack with equipment other than the specified unit.
Do not get dirt, sand, liquids, or other foreign matter on the terminals.
Do not touch the plug terminals (i and j) with metal objects.
Do not disassemble, remodel, heat or throw into fire.
If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly
with water.
If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes
thoroughly with water, and then consult a doctor.
Warning
Risk of fire, explosion and burns. Do not disassemble, heat above 60 oC (140 oF) or
incinerate.
AC adaptor
This AC adaptor operates on AC between 110 V and 240 V.
But
In the U.S.A. and Canada, the AC adaptor must be connected to a 120 V AC power
supply only.
When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor to
suit the AC outlet configuration.
When connecting to a supply of greater than AC 125 V, ensure the cord you use is suited
to the voltage of the AC supply and the rated current of the AC adaptor.
Contact an electrical parts distributor for assistance in selecting a suitable AC plug
adaptor or AC cord set.
The socket outlet shall be installed near the equipment and easily accessible. The mains
plug of the power supply cord shall remain readily operable. To completely disconnect this
apparatus from the AC Mains, disconnect the power supply cord plug from AC receptacle.
Product Identification Marking is located on the bottom of units.
<For USA-California only>
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material –
special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
.
A lithium ion/polymer battery that is recyclable powers the product
you have purchased. Please call 1-800-8-BATTERY for information
on how to recycle this battery.
U.S.A./CANADA CONSUMERS: ATTENTION:
SDR-H85&S50&T55&T50-VQT2L14_eng.book 4 ページ 2009年12月22日 火曜日 午前10時33
5
VQT2L14
IMPORTANT SAFETY
INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety
instructions on the unit and the applicable safety instructions listed below. Keep these
operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding-type
plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where they exit from the
apparatus.
11) Only use attachments/accessories
specified by the manufacturer.
12) Use only with the
cart, stand, tripod,
bracket, or table
specified by the
manufacturer, or
sold with the
apparatus. When a
cart is used, use caution when moving
the cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14) Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 5 ページ 2009年12月22日 火曜日 午前10時33
6
VQT2L14
Precautions
USE & LOCATION
TO AVOID SHOCK HAZARD ... Your
camera and power supply should not be
exposed to rain or moisture. Do not
connect the power supply or operate your
camera if it gets wet. Your camera has
been designed for outdoor use, however it
is not designed to sustain direct exposure
to water, rain, sleet, snow, sand, dust, or a
direct splashing from a pool or even a cup
of coffee. This action could permanently
damage the internal parts of your camera.
Do not attempt to disassemble this unit.
There are no user serviceable parts
inside. Unplug your camera from the
power supply before cleaning.
AS WITH ANY SMALL OBJECT, SD
CARDS CAN BE SWALLOWED BY
YOUNG CHILDREN. DO NOT ALLOW
CHILDREN TO HANDLE THE SD CARD.
DO NOT AIM YOUR CAMERA AT THE
SUN OR OTHER BRIGHT OBJECTS
DO NOT EXPOSE YOUR CAMERA TO
EXTENDED HIGH TEMPERATURE ...
Such as, in direct sunlight, inside a closed
car, next to a heater, etc... This action
could permanently damage the internal
parts of your camera.
AVOID SUDDEN CHANGES IN
TEMPERATURE ... If the unit is suddenly
moved from a cold place to a warm place,
moisture may form on the SD card and
inside the unit.
DO NOT LEAVE YOUR CAMERA OR
THE POWER SUPPLY TURNED ON
WHEN NOT IN USE.
STORAGE OF YOUR CAMERA ... Store
and handle your camera in a manner that
will not subject it to unnecessary
movement (avoid shaking and striking).
Your camera contains a sensitive pick-up
device which could be damaged by
improper handling or storage.
CARE
TO CLEAN YOUR CAMERA ... Do not
use strong or abrasive detergents when
cleaning your camera body.
TO PROTECT THE LENS ... Do not touch
the surface of the lens with your hand.
Use a commercial camera lens solution
and lens paper when cleaning the lens.
Improper cleaning can scratch the lens
coating.
TO PROTECT THE FINISH OF YOUR
CAMERA ... Before handling your
camera, make sure your hands and face
are free from any chemical products, such
as suntan lotion, as it may damage the
finish.
-If you see this symbol-
WARNING
CAUTION
Information on Disposal in other
Countries outside the European Union
This symbol is only valid
in the European Union.
If you wish to discard this
product, please contact your
local authorities or dealer
and ask for the correct
method of disposal.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 6 ページ 2009年12月22日 火曜日 午前10時33
7
VQT2L14
Indemnity about recorded
content
Panasonic does not accept any
responsibility for damages directly or
indirectly due to any type of problems that
result in loss of recording or edited content,
and does not guarantee any content if
recording or editing does not work properly.
Likewise, the above also applies in a case
where any type of repair is made to the unit
(including any other non-built-in memory/
HDD related component).
For the purposes of these
operating instructions
SD Memory Card, SDHC Memory Card
and SDXC Memory Card are referred to
as the “SD card”.
Functions that can be used for motion
picture recording/motion picture playback
are indicated by in these
operating instructions.
Functions that can be used for still picture
recording/still picture playback are
indicated by in these operating
instructions.
Pages for reference are indicated by an
arrow, for example: l 00
Handling of built-in memory
[SDR-T55]/[SDR-T50]
This unit is equipped with the built-in 8 GB
memory. When using this component, pay
attention to the following points.
This unit is equipped with the built-in 4 GB
memory. When using this component, pay
attention to the following points.
Back up data periodically.
The built-in memory is temporary storage. In
order to avoid erasing data due to static
electricity, electromagnetic waves,
breakage, and failures, back up the data to a
PC or DVD disc. (l 79, 86)
Access lamp [ACCESS] (l 16)
illuminates while the SD card or built-in
memory is being accessed (initialization,
recording, playback, deleting etc.). Do not
perform the following operations when the
lamp illuminates. It may damage the built-
in memory or cause a malfunction in the
unit.
jTurn off the power (remove the battery)
jInsert and remove the USB cable
jExpose the unit to vibrations or shock
About disposing of or giving away this unit.
(l 111)
Handling of HDD [SDR-H85]
This unit is equipped with the built-in 80 GB
HDD. While the HDD is capable of storing a
large amount of data, there are a few things
to look out for. When using this component,
pay attention to the following points.
Do not expose the HDD to vibrations and
shocks.
Due to the environment and handling
conditions, the HDD may be subject to
partial damages or may not be able to read,
record, and play back data. Do not expose
the unit to vibrations or shock, and do not
turn off the power during recording or
playback.
If the unit is used in a place with loud
sounds, such as a club or similar venue,
the recording may stop due to sound
vibrations. Recording data on an SD card
is recommended in these places.
Back up data periodically.
The HDD is temporary storage. In order to
avoid erasing data due to static electricity,
electromagnetic waves, breakage, and
failures, back up the data to a PC or DVD
disc. (l 79, 86)
If the HDD experiences any abnormality,
back up data immediately.
Failure in the HDD may produce continuous
noise or choppy sound during recording or
playing back. Continuous use will cause
further deterioration, and may eventually
disable the HDD. If these phenomena are
observed, copy the data on the HDD to a
PC, a DVD disc etc. immediately and
contact consumer support. (l 124, 125)
SDR-T55
SDR-T50
SDR-H85&S50&T55&T50-VQT2L14_eng.book 7 ページ 2009年12月22日 火曜日 午前10時33
8
VQT2L14
Once the HDD is out of order, data cannot
be restored.
Operation may stop in hot or cold
environments.
The unit is disabled in order to protect the
HDD.
Do not use the unit in low atmospheric
pressures.
The HDD may fail if it is used at altitudes of
3000 m (9800 feet) or higher above sea
level.
Transportation
When the unit is transported, turn off the
power and be careful not to shake, drop, or
cause impact to the unit.
Falling detection
[ ] is indicated on the screen when it
detects a falling state (a weightless state). If
the falling state is detected repeatedly, the
unit may stop the recording or playback
operation in order to protect the HDD.
HDD access lamp [ACCESS HDD] (l 18)
illuminates while the HDD is being
accessed (initialization, recording,
playback, deleting etc.). Do not perform
the following operations when the lamp
illuminates. It may damage the HDD or
cause a malfunction in the unit.
jTurn off the power (remove the battery)
jInsert and remove the USB cable
jExpose the unit to vibrations or shock
About disposing of or giving away this unit.
(l 111)
IMPORTANT
Carefully observe copyright
laws
Whatever you have recorded and created
can be used for your personal
entertainment only. Under copyright
laws, other materials cannot be used
without obtaining permission from the
holders of the copyrights.
These operating instructions are designed
for use with models ,
, and
. Pictures may be slightly
different from the original.
The illustrations used in these operating
instructions show model ,
however, parts of the explanation refer to
different models.
Depending on the model, some functions
are not available.
Features may vary, so please read
carefully.
Cards that you can use with
this unit
SD Memory Card, SDHC Memory Card
and SDXC Memory Card
4 GB (or more) Memory Cards that do not
have the SDHC logo or 48 GB (or more)
Memory Cards that do not have the SDXC
logo are not based on SD Memory Card
Specifications.
Refer to page 23 for more details on SD
cards.
Licenses
SDXC Logo is a trademark of SD-3C,
LLC.
U.S. Patent Nos. 6,836,549; 6,381,747;
7,050,698; 6,516,132; and 5,583,936.
This product incorporates copyright
protection technology that is protected by
U.S. patents and other intellectual
property rights. Use of this copyright
protection technology must be authorized
by Macrovision, and is intended for home
and other limited viewing uses only unless
otherwise authorized by Macrovision.
Reverse engineering or disassembly is
prohibited.
Manufactured under license from Dolby
Laboratories.
Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Microsoft
®
, Windows
®
and Windows
Vista
®
are either registered trademarks or
trademarks of the Microsoft Corporation in
the United States and/or other countries.
Microsoft product screen shot(s) reprinted
with permission from Microsoft
Corporation.
G
SDR-S50
SDR-T55
SDR-T50
SDR-H85
SDR-S50
SDR-H85&S50&T55&T50-VQT2L14_eng.book 8 ページ 2009年12月22日 火曜日 午前10時33
9
VQT2L14
IBM and PC/AT are registered trademarks
of International Business Machines
Corporation of the U.S.
Intel
®
, Core
, Pentium
®
and Celeron
®
are
the registered trademarks or trademarks
of the Intel Corporation in the United
States and other countries.
iMovie and Mac are trademarks of
Apple Inc., registered in the U.S. and
other countries.
PowerPC is a trademark of International
Business Machines Corporation.
YouTube and Picasa are trademarks of
Google, Inc.
Other names of systems and products
mentioned in these instructions are
usually the registered trademarks or
trademarks of the manufacturers who
developed the system or product
concerned.
This product is licensed under the AVC
patent portfolio license for the personal and
non-commercial use of a consumer to (i)
encode video in compliance with the AVC
Standard (“AVC Video”) and/or (ii) decode
AVC Video that was encoded by a consumer
engaged in a personal and non-commercial
activity and/or was obtained from a video
provider licensed to provide AVC Video. No
license is granted or shall be implied for any
other use. Additional information may be
obtained from MPEG LA, LLC.
See http://www.mpegla.com
.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 9 ページ 2009年12月22日 火曜日 午前10時33
10
VQT2L14
Accessories............................................12
Quick Guide............................................13
Preparation
Before using
[1] Parts identification and
handling.......................................16
Setup
[1] Power supply.............................. 19
Inserting the battery ..................... 19
Charging the battery .................... 20
Charging and recording time........ 21
[2] Recording to a card ................... 23
Cards that you can use with
this unit......................................... 23
Inserting/removing an SD card
..... 24
[3] Turning the unit on/off............... 25
Turning the power on and off
with the power button................... 25
Turning the power on and off
with the LCD monitor ................... 25
[4] Selecting a mode ....................... 26
[5] Using the menu screen ............. 27
Language selection...................... 28
Menu list....................................... 28
[6] Setting date and time................. 32
World time setting
(Displaying the time of the travel
destination) .................................. 33
[7] Adjusting LCD monitor.............. 34
LCD monitor adjustment .............. 34
Recording Yourself....................... 34
Recording
Recording (Basic)
[1] Before recording........................ 35
Intelligent Auto Mode................... 36
Quick start.................................... 38
Quick power on............................ 38
[2] Recording motion pictures....... 39
Selecting a media to record
[SDR-T55]/[SDR-T50]/
[SDR-H85] ................................... 40
Recording in long recording mode
.... 41
Recording modes/approximate
recordable time............................ 42
Audio recording modes................ 44
Shooting guide............................. 44
[3] Recording still pictures............. 45
Picture size .................................. 46
Simultaneous recording
(recording still pictures while
recording motion pictures) ........... 46
Number of recordable pictures
..... 46
[4] Recording functions.................. 47
Enhanced optical zoom ............... 47
Digital zoom function ................... 47
Image stabilizer function .............. 48
[5] AF/AE tracking........................... 49
Recording (Advanced)
[1] Recording functions of
operation icons...........................50
Operation icons............................ 50
[2] Recording functions of
menus ..........................................54
[3] Manual recording functions...... 58
White balance .............................. 59
Manual shutter speed/
iris adjustment.............................. 60
Recording with Manual focus....... 61
Contents
SDR-H85&S50&T55&T50-VQT2L14_eng.book 10 ページ 2009年12月22日 火曜日 午前10時33
11
VQT2L14
PreparationRecordingPlaybackBackupWith a PCOthers
Playback
Playback
[1] Motion picture playback............ 62
Creating still picture from motion
picture .......................................... 64
Time frame index ......................... 65
Playing back motion pictures
by date ......................................... 65
Repeat playback .......................... 66
Resuming the previous
playback....................................... 66
[2] Still picture playback................. 67
Playing back still pictures
by date ......................................... 69
Changing the playback setting and
playing back the slide show ......... 69
Editing
[1] Deleting scenes/still pictures ... 70
Protecting scenes/still pictures..... 71
[2] Dividing a scene to partially
delete............................................72
[3] DPOF setting .............................. 73
[4]
Copying between SD card and
Built-in Memory/HDD .....................74
Copying [SDR-T55]/[SDR-T50]/
[SDR-H85].................................... 75
[5] Formatting .................................. 76
With a TV
[1] Watching Video/Pictures on
your TV.........................................77
Backup
With other products
[1]
Connecting a DVD burner to
copy to/play back a disc ...............79
Preparing for copying/
playing back................................. 79
Copying to discs........................... 81
Playing back the copied disc........ 83
Managing the copied disc ............ 84
[2] Dubbing images onto other
video devices ..............................85
With a PC
Before using
[1] What you can do with a PC....... 86
End User License Agreement...... 88
[2] Operating environment ............. 89
Setup
[1] Installation.................................. 92
[2] Connecting to a PC.................... 94
About the PC display................... 96
Using with a PC
[1] Starting VideoCam Suite 3.0..... 97
Reading the operating instructions
of the software applications ......... 97
Upload to YouTube ...................... 98
[2] If using Mac................................ 99
Others
Indications
[1] Indications................................ 100
[2] Messages.................................. 103
About recovery........................... 104
Helpful hints
[1] Functions that cannot be used
simultaneously..........................105
[2] Troubleshooting....................... 106
Cautions for use ..................................110
Specifications ......................................116
Optional accessories ..........................120
Accessory Order Form
(For USA and Puerto Rico
Customers) ................................ 122
Limited Warranty
(ONLY FOR U.S.A. AND
PUERTO RICO).....................................123
Warranty
(For Canadian Customers)..................125
Index .....................................................126
Spanish Quick Use Guide/
Guía española para el uso rápido ......128
SDR-H85&S50&T55&T50-VQT2L14_eng.book 11 ページ 2009年12月22日 火曜日 午前10時33
12
VQT2L14
Accessories
Check the accessories before using this unit.
Product numbers correct as of December 2009. These may be subject to change.
Battery pack
VW-VBL090
(SDR-S50)
(SDR-T55/SDR-T50)
Battery pack
VW-VBK180
(SDR-H85)
AC adaptor
VSK0711
AC cable
K2CA2CA00025
AV cable
K2KYYYY00054
USB cable
K1HY04YY0032
CD-ROM
Software
SDR-H85&S50&T55&T50-VQT2L14_eng.book 12 ページ 2009年12月22日 火曜日 午前10時33
13
VQT2L14
Quick Guide
Inserting the battery
Install the battery by inserting it in the
direction shown in the figure.
Charging the battery
1 Connect the AC adaptor to this unit’s
DC input terminal.
2 Connect the AC cable to the AC
adaptor, then the AC outlet.
For the AC cable, plug in 2 and then 3.
Inserting/removing an SD card
1) Open the LCD monitor.
2) Open the SD card cover and insert
(remove) the SD card into (from) the
card slot.
Face the label side B in the direction
shown in the illustration and press it
straight in as far as it will go.
Press the center of the SD card and then
pull it straight out.
3) Securely close the SD card cover.
How to turn on the power
Turning the power on and off with the
power button
Press the power button to turn on the power.
A The status indicator lights.
To turn off the power, hold down the power
button until the status indicator goes off.
Turning the power on and off with the
LCD monitor
Power is turned on when the LCD monitor is
opened, and power is turned off when it is closed.
To turn on the power
A The status indicator lights.
To turn off the power
B The status indicator goes off.
Access lamp [ACCESS] A
When this unit is accessing the SD
card or built-in memory, the access
lamp lights up.
A Insert the battery until it clicks and
locks.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 13 ページ 2009年12月22日 火曜日 午前10時33
14
VQT2L14
Selecting a mode
Operate the mode switch to change the
mode to or .
Language selection
1) Press the MENU button, then select
[SETUP] # [LANGUAGE] and press the
joystick.
2) Select [English] and the press the
joystick.
Recording motion pictures
1) Change the mode to and open the
LCD monitor.
2) Press the recording start/stop button to
start recording.
When you begin recording, ; changes to
¥.
Recording still pictures
1) Change the mode to and open the
LCD monitor.
2) Press the button.
When selecting media to
record from the menu
[SDR-T55/SDR-T50/SDR-H85]
Select the menu. (l 27)
/
Recording mode (l 39, 45)
Playback mode (l 62, 67)
[MEDIA SELECT]
A VIDEO/SD CARD
B VIDEO/Built-inMemory
C PICTURE/SD CARD
D PICTURE/Built-inMemory
E VIDEO/SD CARD
F VIDEO/HDD
G PICTURE/SD CARD
H PICTURE/HDD
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 14 ページ 2009年12月22日 火曜日 午前10時33
15
VQT2L14
Motion picture playback
1) Change the mode to .
2) Use the joystick to select the Play Mode
Select icon A, then press the center of
the joystick.
3) Select the media you wish to play back,
then press the center of the joystick.
Select [VIDEO/SD CARD] to play back the
SD card.
/
Select [VIDEO/Built-inMemory] to play
back the built-in memory.
Select [VIDEO/HDD] to play back the
HDD.
4) Select the scene to be played back,
then press the joystick.
5) Select the playback operation with the
joystick.
1/;: Playback/Pause
6: Rewind playback
5: Fast forward playback
: Stops the playback and shows
the thumbnails.
Still picture playback
1) Change the mode to .
2) Use the joystick to select the Play Mode
Select icon A, then press the center of
the joystick.
3) Select the media you wish to play back,
then press the center of the joystick.
Select [PICTURE/SD CARD] to play back
the SD card.
/
Select [PICTURE/Built-inMemory] to play
back the built-in memory.
Select [PICTURE/HDD] to play back the
HDD.
4) Select the still picture to be played back,
then press the joystick.
5) Select the playback operation with the
joystick.
1/;: Slide show (playback of the still
pictures in numerical order) start/
pause.
2;: Plays back the previous picture.
;1: Plays back the next picture.
: Stops the playback and shows
the thumbnails.
SDR-T55
SDR-T50
SDR-H85
0h00m00s0h00m00s0h00m00s
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 15 ページ 2009年12月22日 火曜日 午前10時33
16
VQT2L14
Preparation
Before using
1
Parts identification and
handling
1 LCD monitor
Pull the LCD monitor out in the direction of
the arrow with your fingers.
It can open up to 90o.
It can rotate up to 180o A towards the lens
or 90o B towards the opposite direction.
The brightness and color level of the LCD
monitor can be adjusted. (l 34)
2 Intelligent auto/Manual button
[iA/MANUAL] (l 36)
3 Optical image stabilizer button
[ , O.I.S.] (l 48)
4 Power button [ ] (l 25)
5 Delete button [ ] (l 70)
6 Long recording button [LONG REC.]
(l 41)
7 Audio-video output terminal [A/V]
(l 77, 85)
Use the AV cable (only the supplied
cable).
8 USB terminal [ ] (l 80, 94)
9 Access lamp [ACCESS] (l 24)
10 SD card slot (l 24)
11 SD card cover [SD CARD] (l 24)
1 23
456789
10
11
Due to limitations in LCD production
technology, there may be some tiny bright
or dark spots on the LCD monitor screen.
However, this is not a malfunction and
does not affect the recorded picture.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 16 ページ 2009年12月22日 火曜日 午前10時33
17
VQT2L14
12 Lens cover
13 Lens
14 Open/close switch for the lens cover
For the lens protection, be sure to close the
lens cover when not in use.
Slide open/close switch for the lens
cover.
15 Microphone (built-in, stereo)
16 AF/AE button [AF/AE] (l 49)
17 Joystick
Use the joystick to select the recording
functions and playback operations, and to
operate the menu screen.
Move the joystick up, down, left, or right
to select a setting or scene and then
press the joystick to set it.
1 Select by moving up, down, left or right.
2 Set by pressing the center.
Menu screen operations (l 27)
To select the recording functions (l 50)
To adjust manually (l 58)
Playback operations (l 62, 67)
18 Mode switch (l 26)
19 Recording start/stop button (l 39)
20 Menu button [MENU] (l 27)
21 Battery holder (l 19)
13
14
15
12
16 17 18 19
20
21
SDR-H85&S50&T55&T50-VQT2L14_eng.book 17 ページ 2009年12月22日 火曜日 午前10時33
18
VQT2L14
22 Photoshot button [ ] (l 45)
23 When recording: Zoom lever [W/T]
(l 47)
When playing back: Thumbnail
display switch [ / ] (l 63)/
Volume lever [sVOLr] (l 64)
24 Speaker
25 Status indicator (l 25)
26 HDD access lamp [ACCESS HDD]
(SDR-H85) (l 8)
27 DC input terminal [DC IN] (l 20)
Do not use any other AC adaptors except
the supplied one.
28 Grip belt
Adjust the belt length and the pad
position.
1 Flip the belt.
2 Adjust the length.
3 Replace the belt.
29 Battery release lever [BATTERY]
(l 19)
30 Tripod receptacle
(U.S.A. only):
When this unit is purchased, a sensor tag
is attached to the grip belt. Remove the
tag before use.
27
25
26
2322
28
24
29 30
SDR-H85&S50&T55&T50-VQT2L14_eng.book 18 ページ 2009年12月22日 火曜日 午前10時33
19
VQT2L14
Preparation
Setup
1
Power supply
About batteries that you can use with this unit
//
The battery that can be used with this unit is VW-VBL090/VW-VBK180/VW-VBK360.
The battery that can be used with this unit is VW-VBK180/VW-VBK360.
The unit has a function for judging whether the battery can be used
safely, and only dedicated batteries (VW-VBK180/VW-VBK360) support this function.
Only batteries which are genuine Panasonic products and batteries from other
companies certified by Panasonic can be used. (Only batteries which support this
function can be used) Note that Panasonic can only guarantee the quality, performance
or safety of genuine Panasonic batteries and not those made by other companies.
Press the power button to turn off the power. (l 25)
Install the battery by inserting it in the direction shown in the figure.
It has been found that counterfeit battery packs which look very similar to the genuine
product are made available to purchase in some markets. Some of these battery packs
are not adequately protected with internal protection to meet the requirements of
appropriate safety standards. There is a possibility that these battery packs may lead
to fire or explosion. Please be advised that we are not liable for any accident or failure
occurring as a result of use of a counterfeit battery pack. To ensure that safe products
are used we would recommend that a genuine Panasonic battery pack is used.
Inserting the battery
SDR-S50
SDR-T55
SDR-T50
SDR-H85
SDR-H85
Removing the battery
Be sure to hold down the power button
until the status indicator goes off. Then
remove the battery while supporting the
unit to prevent it from dropping.
Move the battery release lever in the
direction indicated by the arrow and
remove the battery when unlocked.
BATTERY
A Insert the battery until it clicks
and locks.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 19 ページ 2009年12月22日 火曜日 午前10時33
20
VQT2L14
The battery will not be charged if the power is turned on.
1 Connect the AC adaptor to this unit’s DC input terminal.
2 Connect the AC cable to the AC adaptor, then the AC outlet.
For the AC cable, plug in 2 and then 3.
The status indicator will flash red at an interval of 2 seconds, indicating that charging has begun.
Connecting to the AC outlet
If you turn on this unit while charging the battery using the AC adaptor, you can use the
power supplied from the AC outlet to power the unit for use.
Refer to page 113 when status indicator flashes either rapidly or slowly.
We recommend using Panasonic batteries (l 12, 21, 120).
If you use other batteries, we cannot guarantee the quality of this product.
Do not heat or expose to flame.
Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period
of time with doors and windows closed.
Charging the battery
When this unit is purchased, the battery is not charged. Charge the battery before
using this unit for the first time.

CAUTION
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type recommended by the
manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 20 ページ 2009年12月22日 火曜日 午前10時33
21
VQT2L14
Charging/Recording time
Temperature: 25 oC (77 oF)/humidity: 60%
These times are approximations.
The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as
high/low temperature.
VW-VBL090 is not available for .
Charging and recording time
SDR-S50/SDR-T55/SDR-T50
Battery model number
[Voltage/Capacity
(minimum)]
Charging time
Maximum
continuously
recordable time
Actual
recordable time
Supplied battery/
VW-VBL090 (optional)
[3.6 V/895 mAh]
2h20min 1h20min 40min
VW-VBK180 (optional)
[3.6 V/1790 mAh]
2h50min 2h55min 1h30min
VW-VBK360 (optional)
[3.6 V/3580 mAh]
4h50min 6h 3h10min
SDR-H85
Battery model
number
[Voltage/
Capacity
(minimum)]
Charging
time
Recording
destination
Recording
mode
Maximum
continuously
recordable
time
Actual
recordable
time
Supplied battery/
VW-VBK180
(optional)
[3.6 V/1790 mAh]
2h50min
HDD
XP 2h30min 1h15min
SP/LP/LXP/
LSP/LLP
2h30min 1h20min
SD
XP/SP 2h35min 1h20min
LP/LXP/
LSP/LLP
2h40min 1h25min
VW-VBK360
(optional)
[3.6 V/3580 mAh]
4h50min
HDD
XP 5h 2h40min
SP 5h5min 2h40min
LP/LXP/
LSP/LLP
5h10min 2h45min
SD
XP 5h15min 2h45min
SP 5h20min 2h50min
LP/LXP/
LSP/LLP
5h25min 2h50min
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 21 ページ 2009年12月22日 火曜日 午前10時33
22
VQT2L14
The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning the unit on/off, moving the zoom lever etc.
The batteries heat up after use or charging. This is not a malfunction.
Battery capacity indication
The display changes as the battery capacity reduces.
####
If there is less than 3 minutes remaining, then will become red. If the battery
discharges, then ( ) will flash.
The remaining battery capacity is displayed when using the Panasonic battery that you
can use for this unit. It may take time to display the remaining battery capacity. The
actual time can vary depending on your actual use.
If the actual remaining time exceeds 9 hours 59 minutes, the indication will stay green
and will not change until the remaining time falls below 9 hours 59 minutes.
When using the AC adaptor or batteries made by other companies, the remaining
battery capacity will not be shown.
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 22 ページ 2009年12月22日 火曜日 午前10時33
23
VQT2L14
Preparation
Setup
2
Recording to a card
The unit can record still pictures or motion pictures to an SD card, built-in memory, or HDD.
To record to an SD card, read the following.
Use SD cards conforming to Class 2 or higher of the SD Speed Class Rating* for
motion picture recording.
* The SD Speed Class Rating is the speed standard for successive writes.
4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more Memory
Cards that do not have the SDXC logo are not based on SD Memory Card Specifications.
When the write-protect switch A on SD card is locked, no recording,
deletion or editing will be possible on the card.
Keep the Memory Card out of reach of children to prevent swallowing.
This unit (an SDXC compatible device) is compatible with SD Memory Cards, SDHC
Memory Cards and SDXC Memory Cards. When using an SDHC memory card/SDXC
memory card with other equipment, check the equipment is compatible with these
memory cards.
Cards that you can use with this unit
Card type Capacity Motion picture recording
Still
picture
recording
SD Memory
Card
8 MB/16 MB Cannot be used.
Can be
used.
32 MB/64 MB/
128 MB/256 MB
Cannot be guaranteed in operation.
The recording may suddenly stop
during motion picture recording
depending on the SD card you use.
(l 107)
512MB/1GB/
2GB
Can be used.
SDHC
Memory
Card
4GB/6GB/8GB/
12 GB/16 GB/
24 GB/32 GB
SDXC
Memory
Card
48 GB/64 GB
64
SDR-H85&S50&T55&T50-VQT2L14_eng.book 23 ページ 2009年12月22日 火曜日 午前10時33
24
VQT2L14
Caution:
Check that the access lamp has gone off.
1 Open the LCD monitor.
2 Open the SD card cover and insert (remove) the SD card into (from)
the card slot.
Face the label side B in the direction shown in the illustration and press it straight in as far
as it will go.
Press the center of the SD card and then pull it straight out.
3 Securely close the SD card cover.
Do not touch the terminals on the back of the SD card.
See page 113 for details on handling the SD card.
Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used on other equipment,
for the first time on this unit, format the SD card. (l 76) When the SD card is formatted, all
of the recorded data is deleted. Once the data is deleted, it cannot be restored.
Access lamp [ACCESS] A
When this unit is accessing the SD card or built-in memory, the access lamp lights up.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 24 ページ 2009年12月22日 火曜日 午前10時33
25
VQT2L14
Preparation
Setup
3
Turning the unit on/off
You can turn the power on and off using the power button or by opening and closing the LCD
monitor.
Press the power button to turn on the power.
A The status indicator lights.
Power is turned on when the LCD monitor is opened, and power is turned off when it is
closed.
During normal use, opening and closing of the LCD monitor can be conveniently used
to turn the power on/off.
To turn on the power
A The status indicator lights.
To turn off the power
B The status indicator goes off.
In the following cases, opening the LCD monitor does not turn on the power. Press the
power button to turn on the power.
jWhen the unit is purchased
jWhen you have turned off the power using the power button
The power will not turn off while recording motion pictures even if the LCD monitor is
closed.
Turning the power on and off with the power button
To turn off the power
Hold down the power button until the
status indicator goes off.
Turning the power on and off with the LCD monitor
SDR-H85&S50&T55&T50-VQT2L14_eng.book 25 ページ 2009年12月22日 火曜日 午前10時33
26
VQT2L14
Preparation
Setup
4
Selecting a mode
Change the mode to recording or playback.
Operate the mode switch to change the mode to or .
Recording mode (l 39, 45)
Playback mode (l 62, 67)
SDR-H85&S50&T55&T50-VQT2L14_eng.book 26 ページ 2009年12月22日 火曜日 午前10時33
27
VQT2L14
Preparation
Setup
5
Using the menu screen
1 Press the MENU button.
2 Select the desired top menu A,
then move the joystick right or
press the joystick.
3 Select the submenu item B,
then move the joystick right or
press the joystick.
Descriptions of submenus and current
settings on menus are displayed
scrolling at the bottom of the screen.
4 Select the desired setting, then
press the joystick to enter the
selection.
To get back to the previous screen
Move the joystick left.
To exit the menu screen
Press the MENU button.
MENU
ENTER
SDR-H85&S50&T55&T50-VQT2L14_eng.book 27 ページ 2009年12月22日 火曜日 午前10時33
28
VQT2L14
You can select the language on the screen display and the menu screen.
1 Press the MENU button, then select [SETUP] # [LANGUAGE] and
press the joystick.
2 Select [English] and press the joystick.
Part of the menu will not be used depending on the used functions. (l 105)
Recording mode
*1 It is not displayed when the Intelligent auto mode is on.
*2 These menus are only for / .
*3 These menus are only for .
*4 These menus are only for .
*5 / / It will be displayed only when the [MEDIA
SELECT] is set to [SD CARD].
*6 / It will be displayed only when the [MEDIA SELECT] is set to
[Built-inMemory].
Language selection
Menu list
SDR-T55
SDR-T50
SDR-H85
SDR-S50
SDR-T55
SDR-T50
SDR-H85
SDR-T55
SDR-T50
RECORD SETUP
[SCENE MODE] (l 54)
[D.ZOOM] (l 47)
[REC MODE] (l 42)
[RELAY REC]
*6
(l 55)
[ASPECT] (l 55)
[FACE FRAMING] (l 55)
[GUIDE LINES] (l 52)
[WEB MODE] (l 51)
[FADE] (l 51)
[FADE COLOR] (l 51)
[AUTO SLOW SHTR]
*1
(l 55)
[BACKLIGHT COMPENS.] (l 51)
[INTELLIGENT CONTRAST]
*1
(l 52)
[SOFT SKIN MODE]
*1
(l 53)
[COLOR NIGHT REC]
*1
(l 53)
[SHOOTING GUIDE] (l 44)
[WIND NOISE CANCELER]
*1
(l 56)
[ZOOM MIC]
*1
(l 56)
[WB ADJUST]
*1
(l 56)
[MF ASSIST]
*1
(l 61)
PICTURE
[SELF TIMER] (l 57)
[SHTR SOUND] (l 57)
SDR-H85&S50&T55&T50-VQT2L14_eng.book 28 ページ 2009年12月22日 火曜日 午前10時33
29
VQT2L14
MEDIA SELECT
*2*3
Recording media may be set
independently for both still pictures and
motion pictures.
/
When recording to the SD card, select
[SD CARD]. When recording to the
built-in memory, select
[Built-inMemory]. (l 40, 62, 67)
When recording to the SD card, select
[SD CARD]. When recording to the
HDD, select [HDD]. (l 40, 62, 67)
SETUP
[DISPLAY]
The screen indications are selected as
shown in the illustration below.
[OFF] [ON]
[EXT. DISPLAY] (l 78)
[CLOCK SET] (l 32)
[SET WORLD TIME] (l 33)
[DATE/TIME] (l 32)
[DATE FORMAT] (l 32)
SDR-T55
SDR-T50
SDR-H85
NOV 15 2010
SP
NOV 15 2010
R 1h20m
A
[ECONOMY]
[OFF]:
The power saving function is not
activated.
[5 MINUTES]:
When about 5 minutes have passed
without any operation, this unit
automatically turns off to save battery
life.
The power save function will not
activate when:
jconnected to AC adaptor
jusing the USB cable for PC, DVD
burner etc.
jPRE-REC is used
[QUICK POWER ON] (l 38)
[QUICK START] (l 38)
[AUDIO REC]
*5
(l 44)
SDR-H85&S50&T55&T50-VQT2L14_eng.book 29 ページ 2009年12月22日 火曜日 午前10時33
30
VQT2L14
[ALERT SOUND]
Starting and stopping of recording and
power on/off can be confirmed with this
sound.
2 Beeps for 4 times
When an error occurs. Check the
sentence displayed on the screen.
(l 103)
[POWER LCD] (l 34)
[LCD SET] (l 34)
[TV ASPECT] (l 78)
[INITIAL SET]
Set to [YES] for changing the menu
settings back to the default condition.
(Settings for [MEDIA SELECT]
*2*3
,
[CLOCK SET] and [LANGUAGE] will
not be changed.)
[FORMAT MEDIA]
*2*3
(l 76)
[FORMAT CARD]
*4
(l 76)
[DEMO MODE]
This item is used to start the unit
demonstration.
(Only when the mode is at the
position)
If [DEMO MODE] is switched to [ON]
when there is no SD card inserted, the
demonstration automatically starts.
//
If [DEMO MODE] is switched to [ON]
when there is no SD card inserted and
while this unit is connected to the AC
adaptor, the demonstration
automatically starts.
If any operation takes place, the
demonstration is canceled. However if
no operations take place for approx.
10 minutes, the demonstration
automatically starts again. To stop the
demonstration, set [DEMO MODE] to
[OFF] or insert an SD card.
[LANGUAGE] (l 28)
You can select the language on the
screen display and the menu screen.
SDR-S50
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 30 ページ 2009年12月22日 火曜日 午前10時33
31
VQT2L14
Playback mode
*1 Only when the disc playback is selected while a DVD burner (optional) is connected, this
does not appear.
*2 Only when the disc playback is selected while a DVD burner (optional) is connected, this
appears.
*3 These menus are only for / .
*4 These menus are only for .
*5 These menus are only for .
*6 This appears only when the [PICTURE/SD CARD] is selected.
*7 / This appears only when the [VIDEO/Built-inMemory] is
selected.
*8 This appears only when the [VIDEO/HDD] is selected.
For any other menus that are not
described above, refer to menus with the
same names for the recording mode and
motion picture playback.
SDR-T55
SDR-T50
SDR-H85
SDR-S50
SDR-T55
SDR-T50
SDR-H85
VIDEO SETUP
[REPEAT PLAY] (l 66)
[RESUME PLAY] (l 66)
[SCENE PROTECT]
*1
(l 71)
[GUIDE LINES] (l 52)
EDIT SCENE
*1
[SPLIT&DELETE]
*7*8
(l 72)
[DELETE] (l 70)
COPY
*1*3*4
*3
(l 75)
*3
(l 75)
*4
(l 75)
*4
(l 75)
DISC SETUP
*2
[FORMAT DISC] (l 84)
[AUTO PROTECT] (l 84)
[CANCEL PROTECT] (l 84)
[DISC STATUS] (l 84)
SETUP
[MEDIA STATUS]
*3*4
(l 74)
[CARD STATUS]
*5
(l 74)
PICT. SETUP
[DPOF SET]
*6
(l 73)
SDR-H85&S50&T55&T50-VQT2L14_eng.book 31 ページ 2009年12月22日 火曜日 午前10時33
32
VQT2L14
Preparation
Setup
6
Setting date and time
When the unit is turned on for the first time, a message asking you to set the date and time
will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
¬ Change the mode to .
1 Select the menu. (l 27)
2 Select the date or time, then
adjust the desired value with
the joystick.
A Displaying the World time setting
(l 33):
[HOME]/ [DESTINATION]
The year can be set between 2000 and
2039.
The 12-hour system is used to display the
time.
3 Press the joystick to enter the
selection.
The clock function starts at [00] seconds.
A message may be displayed prompting
you to set the world time. (l 33)
Press the MENU button to complete the
setting.
Changing the date and time display
mode
Select the menu. (l 27)
[SETUP] # [DATE/TIME] # [OFF]/[D/T]/
[DATE]
Changing the date format
Select the menu. (l 27)
[SETUP] # [DATE FORMAT] # [Y/M/D]/
[M/D/Y]/[D/M/Y]
The date and time function is driven by a
built-in lithium battery.
When this unit is purchased, the clock is
set. If the time display becomes [- -], the
built-in lithium battery needs to be
charged. To recharge the built-in lithium
battery, connect the AC adaptor or attach
the battery to this unit. Leave the unit as it
is for approx. 24 hours and the battery will
maintain the date and time for approx.
6 months. (The battery is still being
recharged even if the power is off.)
[SETUP] # [CLOCK SET]
SDR-H85&S50&T55&T50-VQT2L14_eng.book 32 ページ 2009年12月22日 火曜日 午前10時33
33
VQT2L14
It is possible to display and record the time at the travel destination by selecting your home
region and the travel destination.
1 Select the menu. (l 27)
If the clock is not set, adjust the clock to
the current time. (l 32)
When the [HOME] (your home region) is
not set, the message appears. Press the
joystick to move to Step 3.
2 (Only when setting your home region)
Select [HOME] and press the
joystick.
3 (Only when setting your home region)
Select your home region and
enter the selection with the
joystick.
A The current time
B The time difference from GMT
(Greenwich Mean Time)
To set to daylight savings time, press the
joystick forward. appears and the
summer time setting is turned on; the time
difference from GMT is set forward by one hour.
Press the joystick forward again to return to
standard time.
4 (Only when setting the region of your
travel destination)
Select [DESTINATION] and
press the joystick.
When the home region is set for the first
time, the screen for selecting home/travel
destination appears after setting the home
region successively. If the home region
has already been set once, execute the
menu operation for Step 1.
5 (Only when setting the region of your
travel destination)
Select your travel destination
and enter the selection with the
joystick.
C The local time at the selected travel
destination
D
The time difference between the travel
destination and the home region
To set to daylight savings time, press the
joystick forward. appears and the
summer time setting is turned on. The
clock and time difference from the home
region time are set forward by one hour.
Press the joystick forward again to return
to standard time.
Close the setting by pressing the MENU
button. appears and the time of the
travel destination is indicated.
To return the display to the home
setting
Set the home region using Step 1 to 3, and
close the setting by pressing the MENU
button.
If you cannot find your travel destination in
the area shown on the screen, set it by using
the time difference from your home region.
World time setting (Displaying the time of the travel
destination)
[SETUP] # [SET WORLD TIME]
SDR-H85&S50&T55&T50-VQT2L14_eng.book 33 ページ 2009年12月22日 火曜日 午前10時33
34
VQT2L14
Preparation
Setup
7
Adjusting LCD monitor
These settings will not affect the images
actually recorded.
Adjusting the brightness and
color level of the LCD monitor
It adjusts brightness and color density on the
LCD monitor.
Select the menu. (l 27)
1 Use the joystick to select the
item, then press the center of
the joystick.
[BRIGHTNESS]:
Brightness of the LCD monitor
[COLOR]:
Color level of the LCD monitor
Select and press the center of the
joystick to return to the previous screen.
2 Make adjustments
Close the setting by pressing the MENU
button.
Power LCD
This makes it easier to view the LCD monitor
in bright places including outdoors.
Select the menu. (l 27)
: Makes even brighter / : Makes
brighter / : No setting (normal) / :
Makes darker / : Auto
*
* It is not displayed in the Manual Mode or
in the playback mode.
If you use the AC adaptor, the
indication appears and the screen
becomes brighter automatically when the
power is turned on.
The recordable time using the battery will
become shorter when you use this unit
with the LCD monitor lit up.
¬ Change the mode to .
Rotate the LCD monitor towards
the lens side.
The image is horizontally flipped as if you
see a mirror image. (However the image
recorded is the same as a normal
recording.)
When the LCD monitor is rotated towards
the lens side, the icon will not be displayed
even if you press the joystick.
Only some indications will appear on the
screen. When appears, return the
direction of the LCD monitor to normal
position and check the warning/alarm
indication. (l 103)
LCD monitor adjustment
[SETUP] # [LCD SET]
[SETUP] # [POWER LCD]
+2
+1
0
-
1
A
Recording Yourself
+1
SDR-H85&S50&T55&T50-VQT2L14_eng.book 34 ページ 2009年12月22日 火曜日 午前10時33
35
VQT2L14
Recording
Recording (Basic)
1
Before recording
Basic camera positioning
1 Hold the unit with both hands.
2 Put your hand through the grip belt.
When recording, make sure your footing is stable and there is no danger of colliding with
another person or object.
When you are outdoors, record pictures with the sunlight behind you. If the subject is
backlit, it will become dark in the recording.
Keep your arms near your body and separate your legs for better balance.
Do not cover the microphones with your hand.
Basic motion picture recording
The unit should normally be held steady when recording.
If you move the unit when recording, do so slowly, maintaining a constant speed.
The zoom operation is useful for recording subjects you cannot get close to, but overuse of
zoom in and zoom out can make the resulting motion picture less enjoyable to watch.

SDR-H85&S50&T55&T50-VQT2L14_eng.book 35 ページ 2009年12月22日 火曜日 午前10時33
36
VQT2L14
The following modes based on shooting conditions are set just by pointing the unit to what
you want to record.
Depending on the recording conditions, the unit may not enter the desired mode.
In the Portrait mode, a subject that is bigger and close to center of the screen will be
surrounded by an orange frame. (l 55)
Image stabilizer function (l 48) is set to Active mode/ON in all modes.
Faces may not be detected depending on the recording conditions, such as when faces
are of certain sizes or at certain angles or when digital zoom is used.
Intelligent Auto Mode
/MANUAL
Intelligent auto/Manual button
[iA/MANUAL]
Press this button to change the mode to
Intelligent Auto Mode or Manual Mode.
Please refer to page 58 about Manual
Mode.
Mode Scene Effect
Portrait When the object is a
person
Faces are detected and focused
automatically, and the brightness is
adjusted so it is recorded clearly.
Scenery Recording outdoors The whole landscape will be recorded
vividly without whiting out the background
sky, which may be very bright.
Spotlight Under a spotlight Very bright object is recorded clearly.
Low light Dark room or twilight It can record very clearly even in a dark
room or twilight.
Normal Other situations Contrast is adjusted automatically for
clear images.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 36 ページ 2009年12月22日 火曜日 午前10時33
37
VQT2L14
About Intelligent Auto Mode
When the Intelligent Auto Mode is set to on,
the Auto white balance and Auto focus
operate and automatically adjust the color
balance and focusing.
Depending on the brightness of the subject
etc., the aperture and shutter speed are
automatically adjusted for an optimum
brightness.
Color balance and focus may not be
adjusted automatically depending on light
sources or scenes. If so, manually adjust
these settings. (l 59, 61)
Automatic white balance
The illustration above shows the range over
which the Auto white balance functions.
1) The effective range of Automatic white
balance adjustment on this unit
2) Blue sky
3) Cloudy sky (rain)
4) TV screen
5) Sunlight
6) White fluorescent lamp
7) Halogen light bulb
8) Incandescent light bulb
9) Sunrise or sunset
10) Candlelight
If the automatic white balance is not
functioning normally, adjust the white
balance manually. (l 56,59)
Auto focus
The unit focuses automatically.
Auto focus does not work correctly in the
following situations. Record pictures in the
Manual Focus Mode. (l 61)
jRecording distant and close-up objects
at the same time
jRecording a subject behind a dirty or
dusty window
jRecording a subject that is surrounded
by objects with glossy surfaces or by
highly reflective objects
For details on Scene mode, refer to page 54.
For how to set Manual focus/white balance
manually, refer to page 58-61.
10 000K
9 000K
8 000K
7 000K
6 000K
5 000K
4 000K
3 000K
2 000K
1 000K
2)
1)
3)
4)
5)
6)
7)
8)
9)
10)
SDR-H85&S50&T55&T50-VQT2L14_eng.book 37 ページ 2009年12月22日 火曜日 午前10時33
38
VQT2L14
This unit will resume recording/pause mode
about 0.8 seconds after the LCD monitor is
reopened.
Start time will not shorten if there is no SD
card inserted.
/
Start time will be shorten if the
[Built-inMemory] is selected in the [MEDIA
SELECT], even if there is no SD card
inserted.
Start time will be shorten if the [HDD] is
selected in the [MEDIA SELECT], even if
there is no SD card inserted.
¬ Change the mode to .
1 Select the menu. (l 27)
2 Close the LCD monitor while
the mode is set to .
The status indicator A flashes green and the
unit goes into Quick start standby mode.
3 Open the LCD monitor.
The status indicator A lights red and the unit
is put into recording pause.
When in Quick start standby mode
about 70% of the power used in
Recording pause mode is being
consumed, so the recording time will
be reduced.
Quick start standby mode is canceled if
jabout 5 minutes have elapsed
jmode is set to
It may take some time for Automatic white
balance to adjust.
In the Quick start mode, the zoom
magnification becomes 1k.
If [ECONOMY] (l 29) is set to
[5 MINUTES] and the unit automatically
goes into Quick start standby mode, close
the LCD monitor and then open it again.
Turn the unit off using the power button.
When the power is turned on with the mode
set to , the unit will enter the recording
pause mode after about 1.9 seconds.
Select the menu. (l 27)
In the Quick power on mode, the zoom
magnification becomes 1k.
Quick start
[SETUP] # [QUICK START] # [ON]
SDR-T55
SDR-T50
SDR-H85
Quick power on
[SETUP] # [QUICK POWER ON] #
[ON]
SDR-H85&S50&T55&T50-VQT2L14_eng.book 38 ページ 2009年12月22日 火曜日 午前10時33
39
VQT2L14
Recording
Recording (Basic)
2
Recording motion
pictures
Open the lens cover before turning the unit on. (l 17)
1 Change the mode to and
open the LCD monitor.
2 Press the recording start/stop
button to start recording.
When you begin recording,
;
changes to
¥
.
While recording is in progress, the recording
will not stop even if the LCD monitor is closed.
3
Press the recording start/stop
button again to pause recording.
Screen indications in the
Motion Picture Recording Mode
A Recording mode
B Remaining time left for recording
(When the remaining time is less than
1 minute, [R 0h00m] flashes red.)
C Recording time elapsed
Each time the unit is put into recording
pause, the counter display will be reset
to “0h00m00s”.
Still pictures can be recorded while
recording the motion picture. (l 46)
The images recorded between pressing
the recording start/stop button to start
recording and pressing it again to pause
recording become one scene.
The scene is automatically divided when
the recorded data exceeds 1.9 GB. (The
recording will continue.)
Normal recording mode:
SD CARD
Maximum number of recordable scenes: 9801
Maximum number of different dates: 99
(l
65
)
(In the case of SD cards it is the maximum
number of recordable scenes per card.)
Built-in Memory/HDD
//
Maximum number of recordable scenes:
98901
Maximum number of different dates:
999 (l 65)
Long recording mode:
Maximum number of recordable scenes:
89100
Maximum number of different dates:
99 (l 65)
When either of them reaches to the maximum
limit, additional scenes cannot be recorded.
0h00m00s0h00m00s0h00m00s
R R
1
h
2020
mR
1
h
20
m
SP
0h00m00s0h00m00s0h00m00s
R 1h20mR 1h20mR 1h20m
SP
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 39 ページ 2009年12月22日 火曜日 午前10時33
40
VQT2L14
Media for recording both still pictures and motion pictures may be set on the SD Card, the
built-in memory or the HDD.
Select the menu. (l 27)
Select the media to record motion pictures or still pictures, then press
the center of the joystick.
/:
:
Media set for still pictures and motion pictures will be outlined in a yellow frame.
Press MENU button to end.
Selecting a media to record [SDR-T55]/[SDR-T50]/[SDR-H85]
[MEDIA SELECT]
SDR-T55
SDR-T50
A VIDEO/SD CARD
B VIDEO/Built-inMemory
C PICTURE/SD CARD
D PICTURE/Built-inMemory
SDR-H85
E VIDEO/SD CARD
F VIDEO/HDD
G PICTURE/SD CARD
H PICTURE/HDD
SDR-H85&S50&T55&T50-VQT2L14_eng.book 40 ページ 2009年12月22日 火曜日 午前10時33
41
VQT2L14
Pressing the LONG REC. button allows for recording at the same image quality as Normal
recording mode for approximately twice as long.
1 Press and hold the LONG REC.
button.
The Long recording icon appears.
2 Press the recording start/stop
button to start recording.
Normal recording mode:
Recording will take place in a mode suitable
for playback in devices conforming to the
SD-Video standard.
Long recording mode:
Allows for recording at the same image
quality as Normal recording mode for
approximately twice as long. Enjoy playing
back your video on this camera.
Recording in long recording mode
LONG
REC.
Long recording button
Pressing the button will switch
between Normal recording mode and
Long recording mode.
0h00m00s0h00m00s0h00m00s
LSP
LONG REC
LONG REC
SDR-H85&S50&T55&T50-VQT2L14_eng.book 41 ページ 2009年12月22日 火曜日 午前10時33
42
VQT2L14
Switch the picture quality of the motion pictures to be recorded.
Select the menu. (l 27)
Recording modes/approximate recordable time
[RECORD SETUP] # [REC MODE] # desired setting
Normal recording mode
Recording mode XP SP LP
SD card
4GB 50 min 1h40min 3h20min
8GB 1h45min 3h30min 7h
16 GB 3h30min 7h 14h
32 GB 7h30min 15h 30h
64 GB 15h 30h 60h30min
Built-in
memory
8GB 1h45min 3h30min 7h
Built-in
memory
4GB 50min 1h40min 3h20min
HDD
80 GB 18h30min 37h 74h30min
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 42 ページ 2009年12月22日 火曜日 午前10時33
43
VQT2L14
A Favors image quality
B Favors recording time
If a recording with a lot of movement is recorded, the recording time is reduced.
The recordable time may be reduced if recording of short scene is repeated.
Use time in the row of 4 GB in above table as a guideline for the time that can be copied
onto one DVD disc (4.7 GB).
Recordable time using the battery (l 21)
When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded
(particularly when recording in LP/LLP mode), mosaic-type noise may appear at playback.
Long recording mode
Recording mode LXP LSP LLP
SD card
4GB 1h40min 3h20min 6h40min
8GB 3h30min 7h 14h
16 GB 7h 14h 28h
32 GB 15 h 30 h 60 h
64 GB 30 h 60 h 121 h
Built-in
memory
8GB 3h30min 7h 14h
Built-in
memory
4GB 1h40min 3h20min 6h40min
HDD
80 GB 37 h 74 h 149 h
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 43 ページ 2009年12月22日 火曜日 午前10時33
44
VQT2L14
In Normal recording mode, you may switch
the audio recording method for motion
picture recording on the SD Card.
¬ //
Select [SD CARD] in
[MEDIA SELECT].
Select the menu. (l 27)
[DOLBY] (Dolby Digital):
This is a recording method suitable for
creating a DVD-Video disc using the DVD
burner. (l 79)
[MPEG] (MPEG-1 Audio Layer 2):
This is a recording method suitable for
playing back the SD card using a device
conforming to the SD-Video standard.
This function’s default setting is [DOLBY].
This unit is not capable of converting the
audio recording method after recording
motion pictures.
By using the supplied software (VideoCam
Suite 3.0), audio can be recorded in
[DOLBY] mode on a DVD-Video disc and
in [MPEG] mode on an SD card.
Message is displayed when this unit is
moved rapidly.
Select the menu. (l 27)
When “CAMERA PANNING IS TOO FAST.”
appears, move the unit slowly while
recording.
Message will not appear while pausing the
recording. (Message will appear even if it
is pausing the recording if [DEMO MODE]
is set to [ON].)
In some recording conditions, messages
may not appear.
Audio recording modes
[SETUP] # [AUDIO REC] # [DOLBY]
or [MPEG]
SDR-T55
SDR-T50
SDR-H85
Shooting guide
[RECORD SETUP] # [SHOOTING
GUIDE] # [ON]
SDR-H85&S50&T55&T50-VQT2L14_eng.book 44 ページ 2009年12月22日 火曜日 午前10時33
45
VQT2L14
Recording
Recording (Basic)
3
Recording still pictures
Open the lens cover before turning on the power. (l 17)
Still pictures can also be recorded while recording motion pictures.
Refer to page 40 for methods for selecting recording media.
1 Change the mode to and
open the LCD monitor.
2 Press the button.
Because of slower shutter speeds, it is
recommended that you use a tripod when
recording in low light.
About the screen indications in
Still Picture Recording
R3000: Remaining number of still
pictures
(Flashes in red when [0]
appears.)
R3000R3000R3000
SDR-H85&S50&T55&T50-VQT2L14_eng.book 45 ページ 2009年12月22日 火曜日 午前10時33
46
VQT2L14
Records at the number of recording pixels
set under [ASPECT] (l 55).
The edges of still pictures recorded on this
unit with a 16:9 aspect ratio may be cut at
printing. Check the printer or photo studio
before printing.
You can record still pictures even while
recording motion pictures.
¬ Change the mode to .
While recording motion pictures,
press the button (press to the
bottom) to take the picture.
While recording motion pictures or during
the PRE-REC operation, the following
arrangements are applied so that motion
picture recording takes preference over
still picture recording.
jImage quality is different from ordinary
still pictures.
jThe remaining usable capacity (number
of pictures that can be taken) indication
does not appear.
For vivid still pictures, we recommend
pausing motion picture recording and
taking still pictures after releasing the
PRE-REC mode.
SD cards are only mentioned with their
main memory size.
* Maximum number of recordable pictures
that can be displayed is 99999.
If the number of recordable pictures
exceeds 99999, the number will not
change when the picture is taken until the
number of recordable pictures gets less
than 99999.
Picture size
Aspect Number of pixels
4:3 640k480
16:9 640k360
Simultaneous recording
(recording still pictures
while recording motion
pictures)
Number of recordable
pictures
Picture size
640k480
640k360
SD card
512 MB 3600
1GB 7400
2GB 15000
4GB 30000
6GB 45000
8GB 60500
12 GB 92000
16 GB 99999
*
24 GB 99999
*
32 GB 99999
*
48 GB 99999
*
64 GB 99999
*
Built-in memory
8GB 60500
Built-in memory
4GB 30000
HDD
80 GB 99999
*
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 46 ページ 2009年12月22日 火曜日 午前10時33
47
VQT2L14
Recording
Recording (Basic)
4
Recording functions
¬ Change the mode to .
It is possible to enhance the zoom
magnification up to 78k without degrading
the image quality when recording.
If you take your finger off the zoom lever
during zoom operation, the operation
sound may be recorded. When returning
the zoom lever to the original position,
move it quietly.
When distant subjects are brought closer,
they are focused at about 1.5 m (4.9 feet)
or more.
When the zoom magnification is 1k, this
unit can focus on a subject approx. 2 cm
(0.8z) away from the lens.
If the zoom magnification exceeds 78k ,
then the digital zoom function will be
activated. The maximum magnification
provided by the digital zoom can be
switched.
Select the menu. (l 27)
[OFF]: Optical zoom only (Up to 78k)
[100k]: Up to 100k
[3500k]: Up to 3500k
If [100k] or [3500k] is selected, the digital
zoom range is displayed in blue while
zooming.
The larger the digital zoom magnification,
the more the image quality is degraded.
6
W
T
6
W
T
ヸヵ
ヷヰロ
Zoom lever
T side:
Close-up recording (zoom in)
W side:
Wide-angle recording (zoom out)
The zoom speed varies depending on the
range over which the zoom lever is moved.
Enhanced optical zoom Digital zoom function
[RECORD SETUP] # [D.ZOOM] #
desired setting
SDR-H85&S50&T55&T50-VQT2L14_eng.book 47 ページ 2009年12月22日 火曜日 午前10時33
48
VQT2L14
Optical Image stabilizer can stabilize the
image without decreasing the image quality.
¬ Change the mode to .
Stabilization may not be possible under
strong shaking.
When a tripod is used, we recommend
that you turn the image stabilizer off.
Image stabilizer function
ヰハリハヴハ
Optical image stabilizer button
Pressing the button changes the
optical image stabilizer setting.
# # OFF
Set the Manual Mode before setting
the Image Stabilizer function to off.
: Active mode
This setting gives more stabilization and
is suitable for recording when walking.
: ON
This setting is suitable for recording in a
stable state such as scenery.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 48 ページ 2009年12月22日 火曜日 午前10時33
49
VQT2L14
Recording
Recording (Basic)
5
AF/AE tracking
Open the lens cover before turning the unit on. (l 17)
It is possible to set the focus and exposure to the locked target
The focus and exposure will keep following the subject automatically even if it moves.
(Dynamic tracking)
¬ Change the mode to .
1 Press the AF/AE button
When Intelligent Auto Mode is set to
(Portrait), the prioritized face frame (in
orange) will change to the target frame,
and the subject’s face will be tracked.
2
Align the subject with the target
frame and press the AF/AE
button to lock on to the target
A Target frame
To change the target, press the AF/AE
button and align the target frame with
the new subject and press the AF/AE
button once again.
3 Start recording.
Pressing and holding the AF/AE
button releases the AF/AE tracking.
About target frame
In the event of failure to achieve target
lock, the target frame will blink red and
then disappear. Realign the subject with
the target frame and repress the AF/AE
button to regain target lock.
It may track different objects or may not
lock the target depending on the recording
conditions such as the following:
jWhen the object is too large or too small
jWhen color of the object is similar to the
background
jWhen the scene is dark
AF/AE tracking will be canceled in the
following cases.
jWhen the mode is changed
jWhen the power is turned off
jWhen the Scene mode is set
jWhen the unit is switched to Intelligent
Auto Mode/Manual Mode
jWhen the unit is switched to face-to-
face recording.
AF/AE
SDR-H85&S50&T55&T50-VQT2L14_eng.book 49 ページ 2009年12月22日 火曜日 午前10時33
50
VQT2L14
Recording
Recording
(Advanced)
1
Recording functions of
operation icons
Select the operation icons to add different effects to the images to be recorded.
¬ Change the mode to .
1 Press the joystick, and icons
will be displayed on the
screen.
The indication changes each time the
joystick is moved down.
The indication disappears when the center
of the joystick is pressed again.
2 (e.g. Backlight compensation)
Select an icon with the
joystick.
To release, reselect the operation icon.
* Not displayed when the Intelligent Auto
Mode is on.
The shaded operation icons are not
displayed while recording.
If you turn off the power or change the
mode to , Color night rec and
Backlight compensation functions are
canceled and if you turn off the power, the
Fade function is canceled.
1/2
1/2
NEXT
NEXT
1/2
NEXT
1/2
1/2
NEXT
NEXT
1/2
NEXT
Operation icons
Backlight compensation
Fade
Help mode
Web mode
Guide line
PRE-REC
Intelligent contrast control
*
Soft skin mode
*
Color night rec
*
SDR-H85&S50&T55&T50-VQT2L14_eng.book 50 ページ 2009年12月22日 火曜日 午前10時33
51
VQT2L14
Function Effect
Backlight
compensation
This makes the image brighter to prevent darkening
of a backlit subject.
Fade
(Fade in)
(Fade out)
When you start recording, the image/audio gradually
appears. (Fade in)
When you pause recording, the image/audio
gradually disappears. (Fade out)
The Fade setting is canceled when the recording
stops.
To select the color for Fade in/out
Select the menu. (l 27)
[RECORD SETUP] # [FADE COLOR] # [WHITE] or
[BLACK]
Help mode
Select the desired icon with the joystick to display an
explanation on the screen.
To exit the help mode
Press the MENU button.
WEB MODE
You can record motion pictures of under 10 minutes,
suitable for uploading to YouTube.
The web mode icon [ ] appears.
Press the recording start/stop button to start
recording.
Countdown of remaining time will start from “9m59s”.
Recording will pause automatically after 10 minutes
from start of the recording.
Web mode is canceled if you turn the unit off.
To upload motion pictures to YouTube (l 98)
SDR-H85&S50&T55&T50-VQT2L14_eng.book 51 ページ 2009年12月22日 火曜日 午前10時33
52
VQT2L14
Guide line
You can check if the image is level while recording or
playing back motion pictures and still pictures. The
function can also be used to estimate the balance of
the composition.
The guide lines do not appear on the images actually
recorded.
Selecting the type of Guide line
Select the menu. (l 27)
[RECORD SETUP] # [GUIDE LINES] # desired
setting
Displaying Guide lines at playback
Change the mode to .
[VIDEO SETUP] # [GUIDE LINES] # desired setting
Set to [OFF] to cancel the guide line.
PRE-REC
This allows recording of the pictures and sound to
start approximately 3 seconds before the recording
start/stop button is pressed.
appears on the screen.
Aim this unit at the subject and position it securely.
Press the recording start/stop button to start
recording.
There is no beep sound.
Intelligent contrast
control
This brightens parts that are in shadow and difficult
to see and suppresses white saturation in bright
parts at the same time. Both bright and dark parts
can be recorded clearly.
Function Effect
PRE-REC
SDR-H85&S50&T55&T50-VQT2L14_eng.book 52 ページ 2009年12月22日 火曜日 午前10時33
53
VQT2L14
Fade:
The thumbnails of scenes recorded using
fade in become black (or white).
Help mode:
Recording and function settings cannot be
performed while in help mode.
WEB MODE:
You cannot switch to web mode while
recording.
PRE-REC:
PRE-REC is canceled in the following
cases.
jIf you change the mode.
jIf you press the MENU button.
jIf you turn the unit off.
jIf you start recording.
j3 hours have elapsed
After setting PRE-REC, if recording starts
in less than 3 seconds, or while the PRE-
REC indication flashes within about
3 seconds after initiating the quick start
operation, motion pictures taken
3 seconds before pressing the recording
start/stop button cannot be recorded.
When in normal recording mode, the
thumbnail displays for recorded scenes
will be the initial images from recorded
scenes, while when in long recording
mode, the thumbnail displays for recorded
scenes will be images present when the
recording start/stop button was pressed.
The date indication for scenes recorded
using the PRE-REC function will be the
date when the start/stop button is pressed.
Therefore, the date indication when
displaying thumbnails or during playback
may be different from the date when the
recording actually started.
Intelligent contrast control:
If there are extremely dark or bright parts
or the brightness is insufficient, the effect
may not be clear.
Soft skin mode:
If the background or anything else in the
scene has colors similar to the skin color,
they will also be smoothed.
If the brightness is insufficient, the effect
may not be clear.
If you record a person in the distance, the
face may not be recorded clearly. In this
case, cancel Soft skin mode or zoom in on
the face (close-up) to record.
Color night rec:
Recorded scene is seen as if frames
were missed.
If set in a bright place, the screen may
become washed out for a while.
Bright dots that are usually invisible may
be seen, but this is not a malfunction.
Using a tripod is recommended.
In darker areas, Auto focus may focus a
bit slower. This is normal.
Soft skin mode
This makes skin colors appear softer for a more
attractive appearance.
This is more effective if you record a person closely
from the torso up.
Color night rec
This function allows you to record color images in
very low light situations. (Minimum required
illumination: approx. 2 lx)
Function Effect
SDR-H85&S50&T55&T50-VQT2L14_eng.book 53 ページ 2009年12月22日 火曜日 午前10時33
54
VQT2L14
Recording
Recording
(Advanced)
2
Recording functions of
menus
Function Effect/Setting method
SCENE MODE
When you record images in different situations, this
mode automatically sets optimum shutter speeds and
apertures.
Change the mode to .
Select the menu. (l 27)
[RECORD SETUP] # [SCENE MODE] # desired setting
Set [SCENE MODE] to [OFF] to cancel the function.
5Sports:
To make fast moving scenes less shaky with slow playback
and pause of playback
Portrait:
To make people stand out against the background
Low light:
For dark scenes, such as at dusk
Spotlight:
Improved quality when subject is brightly illuminated.
Snow:
Improved image quality when shooting in snowy locations.
Beach:
To make blue in the sea or sky vibrant
Sunset:
To make red in the sunrise or sunset vibrant
Fireworks:
To capture the fireworks in the night sky beautifully
Scenery:
For spatial scenery
Night scenery:
To capture the evening or night scenery beautifully.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 54 ページ 2009年12月22日 火曜日 午前10時33
55
VQT2L14
Function Effect/Setting method
/
RELAY REC
It is possible to continuously record motion picture to
an SD card when there is no space available in the built-
in memory. (It allows you to record only to SD card from
built-in memory.)
Change the mode to .
Select the menu. (l 27)
[RECORD SETUP] # [RELAY REC] # [ON]
is displayed on the screen. will disappear
when space in the built-in memory is gone and the
recording to the SD card starts.
ASPECT
This allows you to record images compatible with wide-
screen TVs (16:9) and regular TVs (4:3).
Change the mode to .
Select the menu. (l 27)
[RECORD SETUP] # [ASPECT] # [16:9] or [4:3]
FACE FRAMING
[OFF]:
Cancel the setting
[PRIMARY]:
Only the prioritized face
framing is displayed.
[ALL]:
All face detection
framings are displayed.
In the Intelligent Auto Mode, detected faces appear with
frames.
Change the mode to .
Select the menu. (l 27)
[RECORD SETUP] # [FACE FRAMING] # desired
setting
Up to 5 frames are indicated. Larger faces and faces
nearer to the center of the screen take preference over
others.
Prioritized face framing
Prioritized face framing is displayed in orange. Focus and
adjustment of brightness will be performed against the
prioritized face framing.
AUTO SLOW SHTR
You can record bright pictures even in dark places by
slowing the shutter speed.
Change the mode to .
Select the Manual Mode. (l 58)
Select the menu. (l 27)
[RECORD SETUP] # [AUTO SLOW SHTR] # [ON]
The shutter speed is set to 1/30 or more depending on the
surrounding brightness.
SDR-T55
SDR-T50
SDR-H85&S50&T55&T50-VQT2L14_eng.book 55 ページ 2009年12月22日 火曜日 午前10時33
56
VQT2L14
WIND NOISE
CANCELER
This will reduce the wind noise coming into the built-in
microphones while maintaining the realism.
Change the mode to .
Select the Manual Mode. (l 58)
Select the menu. (l 27)
[RECORD SETUP] # [WIND NOISE CANCELER] # [ON]
ZOOM MIC
The zoom microphone is linked to the zooming
operation so that far-away sounds with a tele-shot and
close-up sounds with a wide-angle shot are recorded
more clearly.
Change the mode to .
Select the Manual Mode. (l 58)
Select the menu. (l 27)
[RECORD SETUP] # [ZOOM MIC] # [ON]
WB ADJUST
You can finely adjust the white balance (l 59) when you
cannot acquire the desired hue by setting the white
balance.
Change the mode to .
Select the Manual Mode. (l 58)
Select the menu. (l 27)
[RECORD SETUP] # [WB ADJUST]
The currently-set white balance icon will be displayed.
(l 59)
Adjust by moving the joystick left and right, then press
the MENU button or the center of the joystick to set.
R : Move when the hue is bluish.
B : Move when the hue is reddish.
Function Effect/Setting method
SDR-H85&S50&T55&T50-VQT2L14_eng.book 56 ページ 2009年12月22日 火曜日 午前10時33
57
VQT2L14
SCENE MODE:
(Low light/Sunset)
jThe shutter speed is 1/30 or more .
(Sunset/Fireworks/Scenery/Night Scenery)
jImage may get blurry when a close
object is recorded.
(Sports)
jDuring normal playback, the image
movement may not look smooth.
jColor and screen brightness may
change under indoor lighting.
jIf the brightness is insufficient, the
Sports Mode does not function. The
5 display flashes.
(Portrait)
jColor and screen brightness may
change under indoor lighting.
(Fireworks)
jImage may get washed out when
recorded in bright surroundings.
(Night scenery)
jUsing a tripod is recommended.
RELAY REC:
In the Relay recording, still pictures are
also recorded onto the SD card.
AUTO SLOW SHTR:
When the shutter speed becomes 1/30,
the screen may be seen as if frames are
missed and afterimages may appear.
If the scene is low in brightness or contrast,
the subject may not be focused on.
WIND NOISE CANCELER:
When the Intelligent Auto Mode is set to
on, [
WIND NOISE CANCELER
] is set to
[ON], and the setting cannot be changed.
The sound quality may be changed if this
function is activated in strong winds.
SELF TIMER:
The Self-timer standby mode is canceled
when you press the recording start/stop
button to start motion picture recording.
Setting the Self-timer to Ø2 is a good way
to prevent image shake when the
button is pressed while using a tripod etc.
SHTR SOUND:
There will be no shutter noise when taking
still pictures during motion picture recording.
SELF TIMER
This is for recording still pictures using the timer.
Change the mode to .
Select the menu. (l 27)
[PICTURE] # [SELF TIMER] # desired setting
Ø10 (Records after 10 seconds)
Ø2 (Records after 2 seconds)
When the button is pressed, a still picture is recorded
after the Ø10 or Ø2 display flashes for the time which has
been set.
After recording, the Self-timer is canceled.
To stop the timer midway through
Press the MENU button.
SHTR SOUND
You can add a shutter sound when recording still
pictures.
Change the mode to .
Select the menu. (l 27)
[PICTURE] # [SHTR SOUND] # [OFF]/[ ]/[ ]
Function Effect/Setting method
SDR-H85&S50&T55&T50-VQT2L14_eng.book 57 ページ 2009年12月22日 火曜日 午前10時33
58
VQT2L14
Recording
Recording
(Advanced)
3
Manual recording
functions
¬ Change the mode to .
Press the iA/MANUAL button to switch to Manual Mode.
appears on the screen.
To change to Manual Focus Mode
Switch the operation icon by pressing the joystick down while in the screen above.
Press the joystick forward
This will allow you to switch between Manual Mode and Manual Focus Mode.
To release the Manual Mode
Press the iA/MANUAL button again.
MNL
/MANUAL
4/54/5
NEXTNEXT4/5
NEXT
MNL
White balance (l 59)
Aperture adjustment (l 60)
Shutter speed (l 60)

5/5
5/5
NEXT
NEXT
5/5
NEXT
5/5
5/5
NEXT
NEXT
5/5
NEXT
MNL MNL
[MF] icon shown in the illustration appears.
Manual focus adjustment (l 61)
1 Manual Mode
2 Manual focus mode
SDR-H85&S50&T55&T50-VQT2L14_eng.book 58 ページ 2009年12月22日 火曜日 午前10時33
59
VQT2L14
Automatic white balance function may not reproduce natural colors depending on the scenes
or lighting conditions. If so, you can adjust the white balance manually.
Press the iA/MANUAL button to switch to Manual Mode (l 58)
1 Select [ ] with the joystick.
2 Select the white balance mode
with the joystick.
Select the optimal mode by confirming the
color on the screen.
To return to automatic settings, either
switch to Auto Mode , or press the
iA/MANUAL button again.
To set the white balance
manually
1) Select with the joystick, and fill the
screen with a white subject.
2) Select with the joystick.
When the display stops flashing and
then lights constantly, the setting is
complete.
If the display continues flashing, the
white balance cannot be set. In this case,
use other White balance modes.
When the unit is turned on with the lens
cover closed, the automatic white balance
adjustment may not function properly.
Please turn the unit on after opening the
lens cover.
When the display flashes, the manual
white balance previously adjusted is
stored. Whenever recording conditions
change, re-set the white balance.
When setting both the white balance and
the iris/gain, set the white balance first.
is not displayed on the screen
when is being set.
White balance
Icon Mode/Recording conditions
Auto white balance
adjustment
Sunny mode
Outdoors under a clear sky
Cloudy mode
Outdoors under cloudy sky
Indoor mode 1
Incandescent light, video lights
like in the studio, etc.
Indoor mode 2
Color fluorescent lamps,
sodium lamps in gymnasiums
etc.
Manual adjustment mode
Mercury-vapor lamps,
sodium lamps, some
fluorescent lights
Lights used for wedding
receptions at hotels, stage
spotlights in theaters
Sunrise, sunset, etc.
BACK
BACK
BACK
MNL
AWB
AWB
BACKBACKBACK
MNL
AWB
AWB
SDR-H85&S50&T55&T50-VQT2L14_eng.book 59 ページ 2009年12月22日 火曜日 午前10時33
60
VQT2L14
Shutter Speed:
Adjust it when recording fast-moving subjects.
Iris:
Adjust it when the screen is too bright or too dark.
Press the iA/MANUAL button to switch to Manual Mode (l 58)
1 Select [ ] or [ ] with the
joystick.
2 Adjust the settings with the
joystick.
A Shutter speed:
1/60 to 1/8000
If [AUTO SLOW SHTR] is set to [ON], the
shutter speed will be set between 1/30
and 1/8000.
The shutter speed closer to 1/8000 is
faster.
B Iris/Gain value:
CLOSE # (F16 to F2.2) # OPEN # (0dB
to 18dB)
When the iris value is adjusted to brighter
than [OPEN], it changes to the gain value.
To return to automatic settings, press the
iA/MANUAL button.
When setting both the shutter speed and
the iris/gain value, set the shutter speed
and then set the iris/gain value.
Manual shutter speed adjustment
You may see a band of light around an
object that is shining very bright, or highly
reflective.
During normal playback, image movement
may not look smooth.
If you record an extremely bright object or
record under indoor lighting, color and
screen brightness may change or a
horizontal line may appear on the screen.
In this case, record in Auto Mode or set
the shutter speed to 1/60 in areas where
the power supply frequency is 60 Hz, or
1/100 in areas of 50 Hz.
Manual iris/gain adjustment
If the gain value is increased, the noise on
the screen increases.
Depending on the zoom magnification,
there are iris values that are not displayed.
Manual shutter speed/iris adjustment
OPENOPEN
1/100100
BACKBACKBACK
MNL
SDR-H85&S50&T55&T50-VQT2L14_eng.book 60 ページ 2009年12月22日 火曜日 午前10時33
61
VQT2L14
If auto focusing is difficult due to the conditions, then use Manual focus.
¬ Change the mode to .
Press the iA/MANUAL button to switch to Manual Focus Mode (l 58)
1 (When MF assist function is used)
Select the menu. (l 27)
2 Use the joystick to select [MF]
3 Bring the subject into focus
with the joystick.
The area in focus will be displayed in blue.
Display will return to normal approximately
2 seconds after the completion of the focus
adjustment operation.
When [MF ASSIST] is set to [OFF], the
blue area is not displayed.
To return to Auto focus, either switch to
[AF] as in step 2, or repress the iA/
MANUAL button.
The blue display does not appear in the
motion picture that is actually recorded.
Recording with Manual focus
[RECORD SETUP] # [MF ASSIST] #
[ON]
5/5
5/5
NEXT
NEXT
5/5
NEXT
MNL
SDR-H85&S50&T55&T50-VQT2L14_eng.book 61 ページ 2009年12月22日 火曜日 午前10時33
62
VQT2L14
Playback
Playback
1
Motion picture playback
1 Change the mode to .
2 Use the joystick to select the
Play Mode Select icon A, then
press the center of the
joystick.
3 Select the media you wish to
play back, then press the
center of the joystick.
Select [VIDEO/SD CARD] to play back the
SD card.
/
Select [VIDEO/Built-inMemory] to play
back the built-in memory.
Select [VIDEO/SD CARD] to play back the
SD card.
Select [VIDEO/HDD] to play back the
HDD.
Select [VIDEO/SD CARD] to play back the
SD card.
4 Select the scene to be played
back, then press the joystick.
The operation icon will be displayed or
hidden each time the center of the joystick
is pressed.
Next (previous) page can be displayed by
selecting / .
SDR-S50
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 62 ページ 2009年12月22日 火曜日 午前10時33
63
VQT2L14
5 Select the playback operation
with the joystick.
1/;: Playback/Pause
6: Rewind playback
5: Fast forward playback
: Stops the playback and shows
the thumbnails.
Change the thumbnail display
Pressing the zoom lever to the or
side as in step 4 will cause the thumbnail
display to change in the order shown below.
20 scenes () 9 scenes () 1 scene
() Time frame index (l 65)
9 scenes display returns if the power is
turned off or the mode is changed.
To play back scenes recorded
in long recording mode (l 41)
1) Select [CHANGE VIDEO]
/
will be displayed.
Re-selecting [CHANGE VIDEO] will cause
the display to return to the Normal
recording mode recording media selection
screen.
2) Select the media you wish to play back.
3) Select the scene to be played back
0h00m00s
0h00m00s
0h00m00s
ヸヵ
ヷヰロ
SDR-S50
SDR-T55
SDR-T50
SDR-H85
LONG REC
SDR-H85&S50&T55&T50-VQT2L14_eng.book 63 ページ 2009年12月22日 火曜日 午前10時33
64
VQT2L14
Speaker volume adjustment
Move the volume lever to adjust the speaker
volume during playback.
Towardsr”:
Increases the volume
Towardss”:
Decreases the volume
Fast forward/rewind playback
Move the joystick left or right during
playback.
Move the joystick again to increase the
speed. (The display on the screen
changes from 5 to .)
Normal playback is restored when you
select .
Slow-motion playback
1 Pause the playback.
2 Move and hold the joystick left or
right.
( is for reverse slow-motion
playback)
Press and hold the joystick to one side for
slow-motion playback.
Normal playback is restored when you
select .
When slow-motion pictures are played
back in reverse, they will be shown
continuously at approximately 2/3
rd
the
speed of normal playback (intervals of
0.5 seconds).
Slow playback of the motion picture
recorded in long recording mode will be
carried out at 0.5-second intervals.
Frame-by-frame playback
The motion picture is advanced one frame at
a time.
1 Pause the playback.
2 Move the joystick left or right.
( is for reverse frame-by-frame
playback)
Normal playback is restored when you
select .
When the frames are advanced one at a
time in the reverse direction, they will be
shown in intervals of 0.5 seconds.
Frame-by-frame playback of the motion
picture recorded in long recording mode
will be carried out at 0.5-second intervals.
Sound will be heard only during normal
playback.
If pause play is continued for 5 minutes,
the screen returns to the thumbnails.
The elapsed time for playback indication
will be reset to “0h00m00s” for each
scene.
A single frame from the recorded motion
picture can be saved as a still picture.
Picture size of the still picture to be recorded
is (640k360) or (640k480).
1 Pause at the scene you want to
save as a still picture during
playback.
It is convenient to use slow-motion
playback and frame-by-frame playback.
2 Press the button.
Date the motion picture was recorded will
be registered as date of the still picture.
Still pictures will be saved with the aspect
ratio of the motion picture. (l 55)
Quality will be different from the normal
still picture.
ヸヵ
ヷヰロ
Creating still picture from
motion picture
SDR-H85&S50&T55&T50-VQT2L14_eng.book 64 ページ 2009年12月22日 火曜日 午前10時33
65
VQT2L14
One-scene images will be displayed as
thumbnails under the set search conditions.
It is possible to play back the scene from any
desired point.
Move the zoom lever to side and
change over the thumbnail display to Time
frame index. (l 63)
1 Use the joystick to select
search conditions, then press
the center of the joystick.
A Set time selection
B Scene selection
Next (previous) scene can be displayed by
selecting / .
2 Choose the desired search
item in units of [3 SECONDS],
[6 SECONDS], [12 SECONDS]
or [MINUTES].
3 (Only when [MINUTES] has been
selected under step 2)
Set the time and then press the
center of the joystick.
4 Choose the thumbnail from
which you wish to begin
playback, then press the
center of the joystick.
Next (previous) thumbnail can be
displayed by selecting / .
Scenes recorded on the same day can be
played back in succession.
1 Select the date select icon and
press the joystick.
A Date select icon
2 Select the playback date, then
press the joystick.
The scenes recorded on the date selected
are displayed as thumbnails.
3 Select the scene to be played
back, then press the joystick.
Playing back of all the scenes returns if
the power is turned off or the mode is
changed.
Even if scenes are recorded on the same
day, they are grouped separately in the
following cases.
jWhen the number of scenes exceeds 99
jWhen the world time setting is changed
Time frame index
Playing back motion
pictures by date
SDR-H85&S50&T55&T50-VQT2L14_eng.book 65 ページ 2009年12月22日 火曜日 午前10時33
66
VQT2L14
Playback of the first scene starts after
playback of the last scene finishes.
Select the menu. (l 27)
The indication appears on the full
screen views.
All the scenes are played back repeatedly.
(When playing back motion pictures by
date, all the scenes on the selected date
are played back repeatedly.)
If playback of a scene was stopped halfway,
the playback can be resumed from where it
was stopped.
Select the menu. (l 27)
If playback of a motion picture is stopped,
appears on the thumbnail view of the
stopped scene.
The memorized resume position is cleared
if you turn off the power or change the
mode.
(The setting of [RESUME PLAY] does not
change.)
Repeat playback
[VIDEO SETUP] # [REPEAT PLAY] #
[ON]
Resuming the previous
playback
[VIDEO SETUP] # [RESUME PLAY] #
[ON]
SDR-H85&S50&T55&T50-VQT2L14_eng.book 66 ページ 2009年12月22日 火曜日 午前10時33
67
VQT2L14
Playback
Playback
2
Still picture playback
1 Change the mode to .
2 Use the joystick to select the
Play Mode Select icon A, then
press the center of the
joystick.
3 Select the media you wish to
play back, then press the
center of the joystick.
Select [PICTURE/SD CARD] to play back
the SD card.
/
Select [PICTURE/Built-inMemory] to play
back the built-in memory.
Select [PICTURE/SD CARD] to play back
the SD card.
Select [PICTURE/HDD] to play back the
HDD.
Select [PICTURE/SD CARD] to play back
the SD card.
4 Select the still picture to be
played back, then press the
joystick.
The operation icon will be displayed or
hidden each time the center of the joystick
is pressed.
SDR-S50
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 67 ページ 2009年12月22日 火曜日 午前10時33
68
VQT2L14
Next (previous) page can be displayed by
selecting / .
5 Select the playback operation
with the joystick.
1/;: Slide show (playback of the still
pictures in numerical order) start/
pause.
2;: Plays back the previous picture.
;1: Plays back the next picture.
: Stops the playback and shows
the thumbnails.
Change the thumbnail display
During step 4, the thumbnail display
changes in the following order if the zoom
lever is operated to side or side.
20 still pictures ()
9 still pictures
()
1 still picture
9 still pictures display returns if the power
is turned off or the mode is changed.
ヸヵ
ヷヰロ
Still picture compatibility
This unit is compliant with the unified
standard DCF (Design rule for Camera
File system) established by JEITA
(Japan Electronics and Information
Technology Industries Association).
The file format of still pictures
supported by this unit is JPEG. (Not all
JPEG formatted files will be played
back.)
This unit may degrade or not play back
still pictures recorded or created on
other products and other products may
degrade or not play back still pictures
recorded on this unit.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 68 ページ 2009年12月22日 火曜日 午前10時33
69
VQT2L14
Still pictures recorded on the same day can
be played back in succession.
1 Select the date select icon and
press the joystick.
A Date select icon
2 Select the playback date, then
press the joystick.
The still pictures recorded on the date
selected are displayed as thumbnails.
3 Select the still picture to be
played back and press the
joystick.
Playing back of all the still pictures returns
if the power is turned off or the mode is
changed.
Even if still pictures are recorded on the
same day, they are grouped separately in
the following cases.
jWhen the number of still pictures
exceeds 999
is displayed after the date in the list by
date for the still pictures created from the
motion picture. (l 64)
1 Select and press the
joystick.
2 Select the desired item and
press the joystick.
[DATE SETUP]:
Select the desired playback date.
[SLIDE INTERVAL]:
Select the playback time display interval.
(When [DATE SETUP] has been
selected)
Select the desired playback date,
then press the center of the
joystick.
(When [SLIDE INTERVAL] has been
selected)
Select the playback interval, then
press the center of the joystick.
[SHORT]:
Approx. 1 second
[NORMAL]:
Approx. 5 seconds
[LONG]:
Approx. 15 seconds
3 Select [START], then press the
center of the joystick.
Playing back still pictures
by date
Changing the playback
setting and playing back
the slide show
SDR-H85&S50&T55&T50-VQT2L14_eng.book 69 ページ 2009年12月22日 火曜日 午前10時33
70
VQT2L14
Playback
Editing
1
Deleting scenes/still
pictures
¬ Change the mode to .
Deleting multiple scenes/still pictures from the thumbnail display
1 Press the button while the
thumbnail view screen is
displayed.
2 Select [SELECT] or [ALL
SCENES] and press the
joystick.
When [ALL SCENES] is selected, all the
scenes or still pictures on the selected
media will be deleted.
(In case of playing back scenes or still
pictures by date, all the scenes or still
pictures on the selected date will be
deleted.)
Protected scenes/still pictures cannot be
deleted.
3 (Only when [SELECT] is selected in
step 2)
Select the scene/still picture to
be deleted, then press the
joystick.
A scene or still picture will be selected,
and will be displayed. Press the center
of the joystick again to deselect.
Up to 99 scenes can be selected to be
deleted.
4 (Only when [SELECT] is selected in
step 2)
Select [Delete] and press the
joystick or press the button.
To continuously delete other scenes/still
pictures, repeat steps 3-4
Deleted scenes/still pictures cannot be restored, so perform appropriate
confirmation of the contents before proceeding with deletion.
To delete by confirming images
being played back
Press the button while scenes or still
pictures to be deleted are being played
back.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 70 ページ 2009年12月22日 火曜日 午前10時33
71
VQT2L14
When you stop deleting halfway
Press the MENU button while deleting.
The scenes or still pictures that have
already been deleted when the deletion is
canceled cannot be restored.
To complete editing
Press the MENU button.
You can also delete scenes by pressing
the MENU button, selecting [EDIT
SCENE] # [DELETE] # [ALL SCENES]
or [SELECT].
You can also delete still pictures by
pressing the MENU button, selecting
[PICT. SETUP] # [DELETE] # [ALL
SCENES] or [SELECT].
Scenes/still pictures which cannot be
played back (the thumbnails are displayed
as ) cannot be deleted.
In case of [ALL SCENES], the deletion
may take time if there are many scenes or
still pictures.
If you delete scenes recorded on other
products or still pictures conforming to
DCF standard with this unit, all the data
related to the scenes/still pictures may be
deleted.
When still pictures recorded on an SD
card by other products are deleted, a still
picture (other than JPEG) that cannot be
played back on this unit may be erased.
Scenes/still pictures can be protected so
that they are not deleted by mistake.
(Even if you protect some scenes/still
pictures, formatting the media will delete
them.)
¬ Change the mode to .
1 Select the menu. (l 27)
2 Select the scene/still picture to
be protected and press the
joystick.
will be displayed, and the selected
scene/still picture will be protected. Press
the joystick again to deselect.
Press the MENU button to complete the
settings.
When the disc playback is selected while
a DVD burner (optional) is connected,
scenes cannot be protected.
Protecting scenes/still
pictures
[VIDEO SETUP] or [PICT. SETUP]#
[SCENE PROTECT]
SDR-H85&S50&T55&T50-VQT2L14_eng.book 71 ページ 2009年12月22日 火曜日 午前10時33
72
VQT2L14
Playback
Editing
2
Dividing a scene to
partially delete
This divides the recorded scenes in two and deletes the front half or back half.
/
¬ Change the mode to , and switch play mode selection to [VIDEO/
Built-inMemory] (l 62)
¬ Change the mode to , and switch play mode selection to [VIDEO/HDD]
(l 62)
1 Select the menu. (l 27)
2 Select the scene to be divided,
then press the joystick.
3 When you reach the point where you
want to divide the scene
Select [ ] with the joystick.
Move the joystick left or right to fast
forward/rewind playback.
Using slow-motion playback or frame-by-
frame playback makes it easy to search
for the point where you want to divide the
scene. (l 64)
4 Select the half that you want to
delete and press the joystick.
5 Select [YES], then press the
joystick to play back the part to
be deleted.
When you stop the playback, the
confirmation message appears.
When [NO] is selected, the confirmation
message appears.
Proceed to step 6.
6 Select [YES], then press the
joystick.
To continue dividing and deleting
other scenes
Repeat steps 2 to 6.
To complete editing
Press the MENU button.
It is impossible to divide and delete
scenes with a short recording time. The
length of the remaining scenes must be
3 seconds or longer.
It is impossible to set the dividing point at
the beginning or the end of the scene.
When a scene that was divided and
deleted using the SPLIT&DELETE
function is copied to a disc using the DVD
burner or the supplied software and
played back on another device, a
maximum of about 1 second of the
deleted part may be played back.
The actual division may slightly slip off the
previously designated dividing point.
SDR-T55
SDR-T50
SDR-H85
[EDIT SCENE] # [SPLIT&DELETE]
SDR-H85&S50&T55&T50-VQT2L14_eng.book 72 ページ 2009年12月22日 火曜日 午前10時33
73
VQT2L14
Playback
Editing
3
DPOF setting
You can write the data selecting still pictures to be printed and the number of prints (DPOF
data) onto the SD card.
¬ Change the mode to , and switch play mode selection to [PICTURE/
SD CARD] (l 67)
1 Select the menu. (l 27)
2 Select the still picture to be
set, then press the joystick.
3 Select the number of prints,
then press the joystick.
Up to 999 prints can be selected. (Prints
for set number can be printed with a
printer that supports DPOF.)
To cancel the setting, set the number of
prints to [0].
To continuously set other still pictures,
repeat steps 2-3.
Press the MENU button to complete the
settings.
To cancel all DPOF settings
What is DPOF?
DPOF (Digital Print Order Format) is a
format which allows the user of a digital
camera to define which captured images on
the SD card are to be printed, together with
information on the number of copies they
wish to print. (Please note: Not all
commercial printing services support this
feature at this time.)
DPOF setting is not possible during disc
playback while connected to a DVD
burner.
You cannot add the recording date to
pictures to be printed with the DPOF
settings.
//
Copy still pictures saved in the built-in
memory or HDD to an SD card before
setting DPOF.
[PICT. SETUP] # [DPOF SET] # [SET]
[DPOF SET] # [CANCEL ALL]
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 73 ページ 2009年12月22日 火曜日 午前10時33
74
VQT2L14
Playback
Editing
4
Copying between SD card and Built-in
Memory/HDD
Still pictures recorded with this unit can be copied between an SD card inserted in this unit
and a built-in memory/HDD.
Motion pictures cannot be copied to SD card directly, can only be copied to PC.
Confirming remaining capacity on the copy destination
The amount of space left on the SD card, the built-in memory and HDD can be checked.
If the remaining capacity on a single SD card is not enough, you can copy to multiple SD
cards following the instructions on the screen.
¬ Change the mode to .
Select the menu. (l 27)
Current media information will be displayed.
/
Press the center of the joystick to switch display between SD card and built-in memory.
Press the center of the joystick to switch display between SD card and HDD.
Press the MENU button to end.
The SD card, built-in memory or built-in HDD requires some space to store information and
manage system files, so the actual usable space is slightly less than the indicated value.
The usable built-in memory/HDD space is generally calculated as 1 GB=1,000,000,000
bytes. The capacities of this unit, PCs and software are expressed as
1 GB=1,024k1,024k1,024=1,073,741,824 bytes. Therefore, the indicated value of the
capacity appears to be smaller.
[SETUP] # [CARD STATUS]
//
[SETUP] # [MEDIA STATUS]
SDR-S50
SDR-T55
SDR-T50
SDR-H85
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 74 ページ 2009年12月22日 火曜日 午前10時33
75
VQT2L14
If there is not much remaining capacity in the SD card, a confirmation message asking to
copy after deleting all data on the SD card is displayed. Be aware that deleted data cannot
be restored.
1 Change the mode to .
Use a sufficiently charged battery or the
AC adaptor.
2 Select the menu. (l 27)
/
Select to copy information from
the built-in memory to the SD card, or
select to copy information from
the SD card to the built-in memory, then
press the center of the joystick to confirm.
Select to copy information from
the HDD to the SD card, or select
to copy information from the SD
card to the HDD, then press the center of
the joystick to confirm.
3 Follow the screen display, use
the joystick to select the
desired item then press the
center of the joystick.
(When [SELECT SCENES] is selected)
Press the center of the joystick to select
the scene, after which will be
displayed. Press the center of the joystick
again to deselect.
(When [SELECT DATE] is selected)
Press the center of the joystick to select
the date, which will be outlined in red.
Press the center of the joystick again to
deselect.
Up to 99 still pictures or 99 dates can be
set in succession.
If 2 or more SD cards are necessary to
copy, change the card following the
instructions on the screen.
4 Press the MENU button after
the copying complete message
appears.
The thumbnail view of the copy
destination is indicated.
When you stop copying halfway
Press the MENU button while copying.
When the disc playback is selected while
a DVD burner (optional) is connected,
menus are not displayed.
Depending on the following conditions, the
time it takes for copying may be longer.
jThe number of recorded scenes is
large.
jThe temperature of the unit is high.
If some still pictures have already been
recorded to the copy destination, then the
same date may be assigned or images
may not display by date when the list by
date is selected.
It may not be possible to copy some still
pictures recorded on other devices.
Protection and DPOF settings will be
cleared on the copied still pictures when
copying still pictures with protection and
DPOF settings.
The order in which the still pictures were
copied cannot be changed.
Copying [SDR-T55]/[SDR-T50]/[SDR-H85]
[COPY]
SDR-T55
SDR-T50
SDR-H85
If you will delete the still pictures after
copying is complete, be sure to play
back the still pictures to check that
they have been copied to correctly
before deleting.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 75 ページ 2009年12月22日 火曜日 午前10時33
76
VQT2L14
Playback
Editing
5
Formatting
Please be aware that if a medium is formatted, then all the data recorded on the
medium will be erased and cannot be restored. Back up important data on a PC, DVD
disc etc. (l 79, 86)
Select the menu. (l 27)
Select [YES], then press the joystick.
After formatting is complete, press the MENU button to close the message screen.
//
1 Select [SD CARD], [Built-inMemory] or [HDD] and press the joystick.
2 Select [YES], then press the joystick.
After formatting is complete, press the MENU button to close the message screen.
//
Perform a physical formatting of the built-in memory/HDD when this unit is to be disposed/
transferred. (l 111)
Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to
vibrations or shock.
[SETUP] # [FORMAT CARD]
[SETUP] # [FORMAT MEDIA]
SDR-S50
SDR-T55
SDR-T50
SDR-H85
Use this unit to format media.
Formatting built-in memory or HDD is only available with this unit.
Do not format an SD card using any other equipment such as a PC. The card may
not be used on this unit.
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 76 ページ 2009年12月22日 火曜日 午前10時33
77
VQT2L14
Playback
With a TV
1
Watching Video/Pictures
on your TV
The motion pictures and still pictures recorded by this unit can be played back on a TV.
Use the AC adaptor to free you from worrying about the battery running down.
If you have a TV with an SD card slot, the motion pictures and still pictures recorded on an
SD card may be played back on the TV. (Refer to the operating instructions of the TV for
details about TV compatibility.)
1 Connect this unit and a TV.
2 Turn on this unit, and change
the mode to .
3 Start playback on this unit.
If the image or audio from this unit
does not appear on the TV
Check the connections.
Check that the plugs are inserted as far as
they go.
Check the TV’s input setting (input
switch). (For more information, please
read the operating instructions for the
TV.)
VIDEO IN
AUDIO IN
A AV cable (supplied)
Insert the plugs as far as they will go.
Do not use any other AV cables
except the supplied one.
Select the video input on the TV that
this unit is connected to.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 77 ページ 2009年12月22日 火曜日 午前10時33
78
VQT2L14
To watch images on a regular
TV (4:3) or when both sides of
the images do not appear on
the screen
Change the menu setting to display the
images correctly. (Check the TV setting.)
Select the menu. (l 27)
Example of images with a 16:9 aspect
ratio on a regular TV (4:3)
If a wide-screen TV is connected, adjust
the aspect setting on the TV. (Refer to the
operating instructions of the TV for
details.)
To display the on-screen
information on the TV
The information displayed on the screen
(operation icon and time code etc.) can be
displayed on the TV.
Select the menu. (l 27)
Select [OFF] to erase the information.
The screen on this unit will not change.
[SETUP] # [TV ASPECT] # [4:3]
[TV ASPECT] setting
[16:9] [4:3]
[SETUP] # [EXT. DISPLAY] # [ON]
Refer to the following support site for information about Panasonic TVs with an SD
card slot for playing back your pictures.
http://panasonic.net/
For details on how to play back, please read the operating instructions for the TV.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 78 ページ 2009年12月22日 火曜日 午前10時33
79
VQT2L14
Backup
With other products
1
Connecting a DVD burner
to copy to/play back a disc
Motion pictures or still pictures recorded with this unit can be copied to a DVD disc by
connecting a DVD burner (optional) to this unit using a Mini AB USB Connection Cable
(supplied with DVD burner). The copied DVD disc can also be played back.
Please read the operating instructions of the DVD burner for how to use it.
About discs that can be used for copying
*1 Use a new disc. You can additionally copy only to a DVD-RAM. When you copy to
DVD-RW, DVD-R, DVD-R DL, +RW, +R or +R DL the disc is automatically finalized to
allow playback on other devices and additional copying will not be possible.
*2 Only DVD-RAM copied with the DVD burner or VideoCam Suite 3.0 can additionally
copy.
*3 Connect this unit and a DVD burner before formatting. If you format a used disc, you can
copy on that disc. Please be aware that if a disc is formatted, then all the data recorded
on the disc will be erased. (l 84)
*4 Only VW-BN2 can be used for +RW, +R and +R DL.
We recommend using the discs that have been recommended in the operating instructions
of the DVD burner. Refer to the operating instructions of the DVD burner for details about
recommended discs, disc handling etc.
Preparing for copying/playing back
We recommend using Panasonic DVD burner VW-BN1/VW-BN2.
Disc type
DVD-RAM DVD-RW/+RW
*4
DVD-R/DVD-R DL/
+R
*4
/+R DL
*4
Copy*
1
≤≤≤
Additional copy*
2
——
Format*
3
≤≤
SDR-H85&S50&T55&T50-VQT2L14_eng.book 79 ページ 2009年12月22日 火曜日 午前10時33
80
VQT2L14
1 Connect the AC adaptor (supplied with DVD burner) to the DVD
burner.
You cannot supply power to the DVD burner from this unit.
2 Connect this unit to the AC adaptor and change the mode to .
3 Connect this unit to the DVD burner with the Mini AB USB
Connection Cable (supplied with DVD burner).
A Mini AB USB Connection Cable (supplied with DVD burner)
B DVD burner (optional)
Insert the plugs as far as they will go.
4 Insert the disc in the DVD burner.
Insert the DVD disc with the recording label side up when using the DVD burner.
5 Select the desired item and press the joystick
[BURN DISC]:
Refer to page 81 for how to copy discs.
[PLAY DISC]:
Refer to page 83 for how to play back the copied discs.
To terminate the connection with the DVD burner
Press the MENU button.
Disconnect the Mini AB USB Connection Cable from this unit.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 80 ページ 2009年12月22日 火曜日 午前10時33
81
VQT2L14
You cannot copy from multiple SD cards to 1 disc. (You can additionally copy only to a
DVD-RAM.)
Motion pictures and still pictures cannot both be copied to a single disc.
Scenes recorded in Normal recording mode and scenes recorded in long recording mode
cannot be copied to the same disc.
Refer to page 82 for Approximate time for copying to a disc.
1 Connect this unit to the DVD
burner to prepare for copying.
(l 79)
2 Follow the screen display, use
the joystick to select the
desired item then press the
center of the joystick.
Select and press the center of the
joystick to return to the previous step.
(
When [SELECT SCENES] is selected)
Press the center of the joystick to select
the scene, which will then be
displayed. Press the center of the joystick
again to deselect.
(
When [SELECT DATE] is selected)
Press the center of the joystick to select
the date, which will be outlined in red.
Press the center of the joystick again to
deselect.
Up to 99 scenes/99 dates can be selected
in succession.
3 Select [START], then press the
center of the joystick.
When 2 or more discs are necessary for
copying, follow the on-screen instructions
to switch discs.
You may need more discs than displayed
number of discs when you are copying
additionally to a used DVD-RAM.
Eject the disc after copying is completed.
When the copied disc is played back on
another device and the list of scenes is
displayed, they are ordered by date.
When copying motion pictures recorded in long recording mode
The scenes recorded in long recording mode are copied after being converted to normal
recording mode. When copying, the number of discs required for copying may also
increase, because the recording volume may increase, even for the same recording time,
due to the data volume increase caused by the conversion.
Copying to discs
Before you delete the data on the media after copying is complete, be sure to play
back the discs to check that they have been copied to correctly. (l 83)
SDR-H85&S50&T55&T50-VQT2L14_eng.book 81 ページ 2009年12月22日 火曜日 午前10時33
82
VQT2L14
The disc that was copied to can be played back by connecting this unit and a DVD
burner. (l 83)
Do not turn off this unit or the DVD burner or disconnect the Mini AB USB Connection
Cable while copying. Also, do not shake this unit or the DVD burner.
It is impossible to stop copying halfway.
The order in which the scenes were copied cannot be changed.
Data that has been recorded on another device may not be copied.
Because copying is carried out in units of scenes, unused disc space may arise when
copying to two or more discs.
There is no guarantee that a disc created by connecting this unit and the DVD burner will
play back on any playable device.
Important Notice
When inserting a disc containing recorded motion/still pictures into other
devices, a message prompting you to format the disc may be displayed. Do not
format the disc, since deleted data cannot be restored later.
Approximate time for copying to a disc
To copy motion pictures to the full capacity of a disc
Disc type
Copy time
Normal
recording mode
Long recording mode
XP SP LP
DVD-RAM
Approx. 40 min
to 90 min
Approx. 90 min
to 120 min
Approx. 180 min
to 240 min
Approx. 360 min
to 480 min
DVD-RW
*
/
+RW
*
Approx. 30 min
to 60 min
DVD-R
*
/
+R
*
Approx. 15 min
to 60 min
* Even if the data capacity to be copied is small, the time it takes for copying may be
about the same as the time shown in the table.
To copy approx. 600 MB still pictures
Disc type Copy time
DVD-RAM/DVD-RW/DVD-R/
+RW/+R
Approx. 30 min to 40 min
Copy time of DVD-R DL/+R DL is approximately 2 to 3 times that of DVD-R/+R.
Depending on the following conditions, the time it takes for copying may be longer than
the above times.
jWhen the number of recorded scenes is large
jWhen the temperature of the DVD burner has become high
SDR-H85&S50&T55&T50-VQT2L14_eng.book 82 ページ 2009年12月22日 火曜日 午前10時33
83
VQT2L14
Only discs that have been copied by connecting this unit to the DVD burner or
created with VideoCam Suite 3.0 can be played back.
A Mini AB USB Connection Cable (supplied with DVD burner)
1 Connect this unit to the DVD burner to prepare for playback. (l 79)
When playing back on a TV, connect this unit to the TV. (l 77)
2 Use the joystick to select a scene or a still picture, then press the
center of the joystick for playback.
The playback operation is performed the same as when playing back motion pictures or
still pictures. (l 62, 67)
It will return to step 5 on page 80 when [Return] is selected in the thumbnail screen.
It is also possible to switch the media to play back by selecting the Play Mode Select icon.
It is possible to select [VIDEO/DISC] or [PICTURE/DISC] when the DVD burner is
connected.
Playing back the copied disc
SDR-H85&S50&T55&T50-VQT2L14_eng.book 83 ページ 2009年12月22日 火曜日 午前10時33
84
VQT2L14
Connect this unit to a DVD burner, use the joystick to select [PLAY DISC], then press
the center of the joystick. (l 79)
Formatting discs
This is for initializing DVD-RAM and
DVD-RW/+RW discs.
Please be aware that if a disc is
formatted, then all the data recorded on
the disc will be erased. Back up
important data on a PC etc.
Select the menu. (l 27)
After formatting is complete, press the
MENU button to close the message
screen.
Connect this unit and the DVD burner to
format discs. You may no longer be able to
use the discs if you format them on
another device such as a PC etc.
Auto protect
You can protect (write protect) a DVD-RW
disc when copying still pictures.
1 Select the menu. (l 27)
If a disc that you copied to is inserted in
another device without protecting it, a
message may be displayed prompting you
to format the disc. We recommend setting
[AUTO PROTECT] to [ON] in order to
prevent accidental deletion.
2 Copy to the disc. (l 81)
After copying, the disc is write protected.
To release the disc protection
Select the menu. (l 27)
After successfully releasing [AUTO
PROTECT], press the MENU button to
close the message screen.
Displaying disc information
Information such as the type of recorded
disc, the number of recorded scenes and
whether or not the disc is finalized is
displayed.
Select the menu. (l 27)
Press the MENU button to exit the
information screen.
Managing the copied disc
[DISC SETUP] # [FORMAT DISC]
[DISC SETUP] # [AUTO PROTECT] #
[ON]
[DISC SETUP] # [CANCEL PROTECT]
[DISC SETUP] # [DISC STATUS]
SDR-H85&S50&T55&T50-VQT2L14_eng.book 84 ページ 2009年12月22日 火曜日 午前10時33
85
VQT2L14
Backup
With other products
2
Dubbing images onto
other video devices
Images played back on this unit can be dubbed onto a DVD recorder or video device.
Use the AC adaptor to free you from worrying about the battery running down.
1 Connect this unit to a video
device and then change the
mode to .
2 Start playback on this unit.
3 Start recording on the
connected device.
To stop recording (dubbing), stop playback
on this unit after stopping recording on the
recorder.
If the date and time display and function
indication are not wanted, cancel them
before dubbing. (l 32, 78)
Using SD card slot or USB
terminal of other video devices
If you have a DVD recorder with an SD card
slot or a USB terminal, images recorded by
this unit can be copied (dubbed) onto the
hard disk or a DVD disc.
Refer to the operating instructions of your
DVD recorder for information about whether
or not it supports copying (dubbing) from an
SD card or a USB terminal.
When using a USB terminal
Connect this unit to a DVD recorder with the
USB cable (supplied), then select [PC/
RECORDER] on the USB function selection
screen.
VIDEO IN
AUDIO IN
A AV cable (supplied)
Insert the plugs as far as they will
go.
Do not use any other AV cables
except the supplied one.
Select the video input on the
video device and TV that this unit
and the video device are
connected to.
If the dubbed images are played back on
a wide-screen TV, the images may be
stretched vertically.
In this case, refer to the operating
instructions for the device you are
connecting to or read the operating
instructions of the wide-screen TV and
set the aspect ratio to 16:9.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 85 ページ 2009年12月22日 火曜日 午前10時33
86
VQT2L14
With a PC
Before using
1
What you can do with a
PC
VideoCam Suite 3.0
You can copy the motion/still picture data to the HDD of PCs or write to media like DVD discs
or SD cards using VideoCam Suite 3.0, the software installed in the supplied CD-ROM.
Refer to the operating instructions of VideoCam Suite 3.0 (PDF file) for details on how to use
it.
Smart wizard
The Smart wizard screen is automatically displayed when you connect this unit to a PC with
VideoCam Suite 3.0 installed. (l 94)
Copy to PC:
You can copy motion/still picture data to the HDD of PCs.
Copy to disc:
You can copy to disc in conventional standard picture quality (MPEG2 format).
Upload to YouTube:
You can easily upload motion pictures to YouTube. (l 98)
Select the function you wish to use and follow the on-screen instructions for easy copying.
Available function Data type Software required
Copying data to a PC Motion picture
and still picture
CD-ROM (supplied):
VideoCam Suite 3.0
Editing:
Editing motion picture data copied
on an HDD of a PC
Title, Transition, Delete partially,
Divide Scene
Converting part of motion picture
into still picture
Motion picture
Playing back on a PC
Refer to page 99 if using a Mac.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 86 ページ 2009年12月22日 火曜日 午前10時33
87
VQT2L14
When Windows is used as the PC operating system, a message prompting to format
may display when a SDXC card is read. (Please be aware that if a media is formatted,
then all the data recorded on the media will be erased.)
http://panasonic.net/avc/sdcard/information/SDXC.html
VideoCam Suite 3.0 can handle images recorded with this unit or by using VideoCam Suite
3.0. Images created with other video cameras, DVD recorders, software and commercial
DVD-Videos are not supported.
We cannot guarantee proper operation of this unit if you use software other than that
supplied.
Do not copy images recorded on this unit using any software other than the supplied
software.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 87 ページ 2009年12月22日 火曜日 午前10時33
88
VQT2L14
Before opening the CD-ROM package, please read the following.
You (“Licensee”) are granted a license for
the Software defined in this End User
License Agreement (“Agreement”) on
condition that you agree to the terms and
conditions of this Agreement. If Licensee
does not agree to the terms and conditions
of this Agreement, promptly return the
Software to Panasonic Corporation
(“Panasonic”), its distributors or dealers from
which you made the purchase.
Article 1 License
Licensee is granted the right to use the
software, including the information recorded
or described on the CD-ROM, instruction
manuals, and any other media provided to
Licensee (collectively “Software”), but all
applicable rights to patents, copyrights,
trademarks and trade secrets in the
Software are not transferred to Licensee.
Article 2 Use by a Third Party
Licensee may not use, copy, modify, transfer
or allow any third party, whether free of
charge or not, to use, copy or modify the
Software, except as expressly provided for
in this Agreement.
Article 3 Restrictions on Copying the
Software
Licensee may make a single copy of the
Software in whole or a part solely for back-
up purpose.
Article 4 Computer
Licensee may use the Software only on one
computer, and may not use it on more than
one computer.
Article 5 Reverse Engineering,
Decompiling or Disassembly
Licensee may not reverse engineer,
decompile, or disassemble the Software,
except to the extent either of them is
permitted under law or regulation of the
country where Licensee resides. Panasonic,
or its distributors will not be responsible for
any defects in the Software or damage to
Licensee caused by Licensee’s reverse
engineering, decompiling, or disassembly of
the Software.
Article 6 Indemnification
The Software is provided “AS-IS” without
warranty of any kind, either expressed or
implied, including, but not limited to,
warranties of non-infringement,
merchantability and/or fitness for a particular
purpose. Further, Panasonic does not
warrant that the operation of the Software
will be uninterrupted or error free. Panasonic
or any of its distributors will not be liable for
any damage suffered by Licensee arising
from or in connection with Licensee’s use of
the Software.
Article 7 Export Control
Licensee agrees not to export or re-export to
any country the Software in any form without
the appropriate export licenses under
regulations of the country where Licensee
resides, if necessary.
Article 8 Termination of License
The right granted to Licensee hereunder will
be automatically terminated if Licensee
contravenes any of the terms and conditions
of this Agreement. In this event, Licensee
must destroy the Software and related
documentation together with all the copies
thereof at Licensee’s own expense.
End User License Agreement
SDR-H85&S50&T55&T50-VQT2L14_eng.book 88 ページ 2009年12月22日 火曜日 午前10時33
89
VQT2L14
With a PC
Before using
2
Operating environment
Even if the system requirements mentioned in these operating instructions are fulfilled,
some PCs cannot be used.
A CD-ROM drive is necessary to install the supplied software applications. (A compatible
DVD writer drive and media are necessary for writing to a DVD.)
Operation is not guaranteed in the following cases.
jWhen 2 or more USB devices are connected to a PC, or when devices are connected
through USB hubs or by using extension cables.
jOperation on an upgraded OS.
jOperation on an OS other than the one pre-installed.
Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)
This software is not compatible with Microsoft Windows 3.1, Windows 95, Windows 98,
Windows 98SE, Windows Me, Windows 2000 and Windows NT.
Operating environment for VideoCam Suite 3.0
PC IBM PC/AT compatible PC
OS
Microsoft Windows XP Home Edition Service Pack 2/Service Pack 3
Microsoft Windows XP Professional Service Pack 2/Service Pack 3
Microsoft Windows Vista Home Basic Service Pack 1/Service Pack 2
Microsoft Windows Vista Home Premium Service Pack 1/Service Pack 2
Microsoft Windows Vista Ultimate Service Pack 1/Service Pack 2
Microsoft Windows Vista Business Service Pack 1/Service Pack 2
Microsoft Windows 7 Starter
Microsoft Windows 7 Home Basic
Microsoft Windows 7 Home Premium
Microsoft Windows 7 Professional
Microsoft Windows 7 Ultimate
CPU Intel Pentium 4 2.0 GHz or higher (including compatible CPU)
Intel Core 2 Duo 1.8 GHz or higher is recommended when a
playback function or MPEG2 output function is used.
RAM 512 MB or more (1 GB or more recommended)
Display High Color (16 bit) or more (32 bit or more recommended)
Desktop resolution of 1024k768 pixels or more (1280k1024
pixels or more recommended)
Windows Vista/
Windows 7:
DirectX 10.0 compatible video card
Windows XP: DirectX 9.0c compatible video card
Compatible with DirectDraw overlay
PCI Express
k16 compatible recommended
SDR-H85&S50&T55&T50-VQT2L14_eng.book 89 ページ 2009年12月22日 火曜日 午前10時33
90
VQT2L14
Supplied CD-ROM is available for Windows only.
Input is not supported in languages other than English, German, French and Simplified
Chinese.
Operation cannot be guaranteed on all DVD drives.
Operation is not guaranteed on Microsoft Windows Vista Enterprise,
Windows 7
Enterprise,
Windows XP Media Center Edition, Tablet PC Edition and not compatible with 64 bit
operation systems.
This software is not compatible with a multi-boot environment.
This software is not compatible with a multi-monitor environment.
If using Windows XP, an administrative account user only can use this software. If using
Windows Vista/
Windows 7,
administrative account and standard account users only can
use this software. (An administrative account user should install and uninstall this
software.)
DVD discs authored with this software are not guaranteed to play in all DVD players.
Depending upon the environment of your PC, if it does not support Hi-Speed USB
(USB 2.0), for example, frame dropout may occur, the audio may be intermittent, or the
software may run slowly when you play back recorded images.
If your PC does not satisfy the above system requirements, an error may occur when
writing data to disc.
Free hard disk
drive space
Ultra DMA — 33 or more
450 MB or more (for installing the software)
When writing to a DVD/SD, more than double the amount of
free space as the disc being created is necessary.
Sound DirectSound Support
Interface USB port [Hi-Speed USB (USB 2.0)]
Other
requirements
Mouse or equivalent pointing device
SD card read/Writer
Internet connection
SDR-H85&S50&T55&T50-VQT2L14_eng.book 90 ページ 2009年12月22日 火曜日 午前10時33
91
VQT2L14
Operating environment for the card reader function (mass storage)
The USB equipment operates with the driver installed as standard in the OS.
PC IBM PC/AT compatible PC
OS
Microsoft Windows XP Home Edition Service Pack 2/Service Pack 3
Microsoft Windows XP Professional Service Pack 2/Service Pack 3
Microsoft Windows Vista Home Basic Service Pack 1/Service Pack 2
Microsoft Windows Vista Home Premium Service Pack 1/Service Pack 2
Microsoft Windows Vista Ultimate Service Pack 1/Service Pack 2
Microsoft Windows Vista Business Service Pack 1/Service Pack 2
Microsoft Windows Vista Enterprise Service Pack 1/Service Pack 2
Microsoft Windows 7 Starter
Microsoft Windows 7 Home Basic
Microsoft Windows 7 Home Premium
Microsoft Windows 7 Professional
Microsoft Windows 7 Ultimate
CPU Windows Vista/Windows 7: 32-bit (k86) Intel Pentium III 1.0 GHz
or higher processor
Windows XP: Intel Pentium
III 450 MHz or higher or Intel Celeron
400 MHz or higher
RAM
Windows 7:
1 GB or higher
Windows Vista Home Basic: 512 MB or higher
Windows Vista Home Premium/Ultimate/Business/Enterprise:
1 GB or higher
Windows XP: 128 MB or more (256 MB or more recommended)
Interface USB port
Other
requirements
Mouse or equivalent pointing device
SDR-H85&S50&T55&T50-VQT2L14_eng.book 91 ページ 2009年12月22日 火曜日 午前10時33
92
VQT2L14
With a PC
Setup
1
Installation
When installing the software, log on to your computer as the Administrator or with a user
name with equivalent authorization. (If you do not have authorization to do this, consult your
manager.)
Do not perform any other operations on your PC while the software is being installed.
For Windows Vista:
1 Insert the CD-ROM into the PC.
Click [Run setup.exe] # [Continue].
If the installation screen does not appear
automatically, double-click the CD-ROM
drive icon in [Computer].
2 Click [Next].
3 Select [I accept the terms of
the license agreement], then
click [Next].
4 Select the country or region
where you live, then click
[Next].
If the country or region cannot be
selected, select [NTSC Area].
When the confirmation message appears,
click [Yes].
5 Select where the application is
to be installed, then click
[Next].
6 Select [Yes] or [No] to create
shortcut.
A message regarding the playback in the
environment used may be displayed
depending on the performance of the PC
used. Click [OK] after confirming.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 92 ページ 2009年12月22日 火曜日 午前10時33
93
VQT2L14
7 When installation is complete, some
notes will appear.
Check the contents, then close
the window.
8 Select [Yes, I want to restart my
computer now.], then click
[Finish].
Uninstalling VideoCam Suite
3.0
Follow the steps below to uninstall any
software applications that you no longer
require.
1 Select [start] # [Control Panel]
# [Uninstall a program].
2 Select [VideoCam Suite 3.0],
then click [Uninstall].
Proceed with the uninstallation by
following the on-screen instructions.
After uninstalling the software, be sure to
reboot the PC.
The PC must be rebooted for the
application to work.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 93 ページ 2009年12月22日 火曜日 午前10時33
94
VQT2L14
With a PC
Setup
2
Connecting to a PC
Connect this unit to the PC after the software applications are installed.
Remove the supplied CD-ROM from your PC.
A USB cable (supplied)
1 Connect this unit to the AC
adaptor.
It is possible to use the unit connected to
the PC with the batteries only, but you will
not be able to write data into the unit.
Use the AC adapter to free you from
worrying about the battery running down.
2 Turn on the unit.
This function is available in all modes.
When using the battery, the LCD monitor
will be turned off after about 5 seconds.
Operating the joystick will cause the LCD
monitor to turn on again.
3 Connect this unit to a PC.
Insert the USB connectors as far as they
will go.
Do not use any other USB cables except
the supplied one. (Operation is not
guaranteed with any other USB cables.)
The Smart wizard screen is automatically
displayed when VideoCam Suite 3.0 is
installed.
This unit is automatically recognized as an
external drive of the PC. (l 96)
A USB function selection screen will be
displayed if VideoCam Suite 3.0 has not
been installed. Use the joystick to select
[PC], then press the center of the
joystick.When you select an option other
than [PC], reconnect the USB cable.
When Windows is used as the PC
operating system, a message prompting
to format may display when a SDXC card
is read. (Please be aware that if a media is
formatted, then all the data recorded on
the media will be erased.)
http://panasonic.net/avc/sdcard/
information/SDXC.html
When the unit is connected to a PC, its
power cannot be turned off.
Disconnect the USB cable, before
turning this unit off.
Do not disconnect the USB cable or the
AC adaptor while the access lamp is on or
card access icon ( ) appears on the
unit screen.
/
Do not disconnect the USB cable or the
AC adaptor while the access lamp is on or
built-in memory access icon ( )
appears on the unit screen.
Do not disconnect the USB cable or the
AC adaptor while the HDD access lamp is
on or HDD access icon ( ) appears on
the unit screen.
When performing reading/writing between a
PC and an SD card, be aware that some SD
card slots built into PCs and some SD card
readers are not compatible with the SDHC
memory card or SDXC memory card.
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 94 ページ 2009年12月22日 火曜日 午前10時33
95
VQT2L14
To disconnect USB cable
safely
1 Double click the icon in task tray
displayed on the PC.
Depending on your PC’s settings, this
icon may not be displayed.
2 Select [USB Mass Storage Device]
and click [Stop].
3
Verify [MATSHITA SDR-S50/SD USB
Device] is selected and click [OK].
Verify [MATSHITA SDR-T55/SD USB
Device] or [MATSHITA SDR-T55/MEM
USB Device] is selected and click
[OK].
Verify [MATSHITA SDR-T50/SD USB
Device] or [MATSHITA SDR-T50/MEM
USB Device] is selected and click
[OK].
Verify [MATSHITA SDR-H85/SD USB
Device] or [MATSHITA SDR-H85/HDD
USB Device] is selected and click
[OK].
Charging the battery using USB bus power
When using the battery, if you turn off the unit and connect it to a PC, Panasonic Blu-ray disc
recorder or Panasonic DVD recorder, the battery will charge.
Insert the USB cable securely all the way. It will not operate properly if it is not inserted all
the way.
Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)
Be sure to connect the unit directly to the PC, Blu-ray disc recorder or DVD recorder.
During charging, the status indicator flashes. When charging is finished, the status
indicator turns off.
Charging cannot be carried out if the status indicator flashes quickly for about 1 minute and
then goes out, or if it does not illuminate at all. Use the AC adaptor to charge. (l 20)
Charging will take 2-3 times longer than charging with the AC adaptor.
Use the AC adaptor when charging the high capacity battery (VW-VBK360; optional).
If the status indicator flashes at a particularly fast or slow rate, refer to page 113.
SDR-S50
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 95 ページ 2009年12月22日 火曜日 午前10時33
96
VQT2L14
When the unit is connected to a PC, it is recognized as an external drive.
Removable disk (Example: ) is displayed in [Computer].
Example folder structure of an SD card:
//
Example folder structure of built-in
memory or HDD:
/
* [CAM_MEM] is displayed
* [CAM_HDD] is displayed.
The following data will be recorded.
1 Up to 999 still pictures in JPEG
format (S1000001.JPG etc.)
2 JPEG format still pictures created
from the motion picture
3 The DPOF setting files
4 SD-Video standard control data
5 SD-Video standard video data
(maximum of 99 files)
6 Long Recording video data
(S1000001.MP4 etc.)
Copying your still pictures to
your PC
Card reader function (mass storage)
Still pictures recorded with this unit can be
copied to the PC with Explorer or other
programs.
1 Double click the folder that contains
the still pictures. ([DCIM] #
[100CDPFQ] etc.)
2 Drag and drop the still pictures onto
the destination folder (on the PCs
HDD).
Do not delete the SD card’s folders. Doing
so may make the SD card unusable in this
unit.
When data not supported by this unit has
been recorded on a PC, it will not be
recognized by this unit.
Always use this unit to format SD cards.
About the PC display
We recommend using VideoCam Suite
3.0 to copy or write back motion picture
data.
Using Windows Explorer or other programs on
the PC to copy, move or rename files and
folders recorded with this unit will result in them
being unusable with VideoCam Suite 3.0.
It is impossible to write data to the built-in
memory or HDD on the unit from a PC.
DCIM
PRIVATE
CAM_SD
100CDPFQ
MGR_INFO
PRG001
MISC
SD_VIDEO
100WCIHS
AVC_MP4
101CDPFS
SDR-T55
SDR-T50
SDR-H85
CAM_MEM/CAM_HDD*
DCIM
PRIVATE
100CDPFQ
MGR_INFO
PRG001
MISC
SD_VIDEO
100WCIHS
AVC_MP4
101CDPFS
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 96 ページ 2009年12月22日 火曜日 午前10時33
97
VQT2L14
With a PC
Using with a PC
1
Starting VideoCam Suite
3.0
When using VideoCam Suite 3.0 on Windows XP, log on to your computer as
Administrator (or with a login name equally authorized). If you log on with a login name
other than Administrator, you cannot use the applications.
When using VideoCam Suite 3.0 on Windows Vista/Windows 7, log on to your computer as
Administrator (or with a login name equally authorized) or with the user name for a
standard user account. If you log on with a user name for a guest user account, the
software cannot be used.
(On the PC)
Select [start] # [All Programs (Programs)] # [Panasonic] #
[VideoCam Suite 3.0] # [VideoCam Suite].
For details on how to use the software applications, read the PDF operating instructions of
the software.
You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0 or later to read the
PDF operating instructions.
Select [start] # [All Programs (Programs)] # [Panasonic] #
[VideoCam Suite 3.0] # [Operating Instructions].
Reading the operating instructions of the software
applications
SDR-H85&S50&T55&T50-VQT2L14_eng.book 97 ページ 2009年12月22日 火曜日 午前10時33
98
VQT2L14
You can easily upload motion pictures to YouTube with the VideoCam Suite 3.0. You need to
record the motion picture to upload in web mode. (l 51)
¬ Turn on this unit, then change the mode to .
1 Connect this unit to a PC. (l 94)
Smart Wizard screen will automatically be displayed.
2 Select [YouTube]
[YouTube Uploader] starts and the motion pictures recorded in web mode are displayed.
Refer to the operating instructions of the software (PDF file) for details on how to use it.
In order to upload motion pictures to YouTube, a user account must first be obtained via
the YouTube site.
After uploading is complete, a message appears. If [OK] is clicked, the USB function will be
set to [PC/RECORDER]. Before turning this unit off, disconnect the USB cable (l 95).
This service is available as of 1 December, 2009.
Any operation about YouTube
services and the specification changes are not
guaranteed. The available services and the displays are subject to change without notice.
Any copyrighted video cannot be uploaded without having the copyright or obtaining
permission from the copyright holder(s).
Upload to YouTube
SDR-H85&S50&T55&T50-VQT2L14_eng.book 98 ページ 2009年12月22日 火曜日 午前10時33
99
VQT2L14
With a PC
Using with a PC
2
If using Mac
VideoCam Suite 3.0 is not available for Mac.
SDXC memory cards cannot be used on Mac.
iMovie’09 supported. For details about iMovie’09, please contact Apple Inc.
Operating environment
Even if the system requirements mentioned in these operating instructions are fulfilled,
some PCs cannot be used.
The USB equipment operates with the driver installed as standard in the OS.
Supplied CD-ROM is available for Windows only.
Copying still pictures on PC
1 Connect this unit to a PC via the supplied USB cable.
The USB function selection screen will appear.
2 Use the joystick to select [PC], then press the center of the joystick.
3 Double-click [CAM_SD] displayed on the desktop.
/
[CAM_SD] and [CAM_MEM] are displayed on the desktop.
[CAM_SD] and [CAM_HDD] are displayed on the desktop.
Files are stored in [100CDPFQ] or [101CDPFS] folder etc. in the [DCIM] folder.
4
Using a drag-and-drop operation, move the pictures you want to acquire
or the folder storing those pictures to any different folder on the PC.
To disconnect USB cable safely
Drag [CAM_SD] disk icon to the [Trash], and then disconnect the USB cable.
/
[CAM_SD] and [CAM_MEM] are displayed on the desktop.
[CAM_SD] and [CAM_HDD] are displayed on the desktop.
PC Mac
OS Mac OS X 10.5.8
Mac OS X 10.6
CPU Power Mac G5 Dual 2.0 GHz or higher
iMac G5 1.9 GHz or higher
Intel
®
-based Mac
RAM 512 MB or more
Interface USB port
SDR-T55
SDR-T50
SDR-H85
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 99 ページ 2009年12月22日 火曜日 午前10時33
100
VQT2L14
Others
Indications
1
Indications
Recording indications
*1 / only
*2 only
Remaining battery power
(l 22)
1h30m Remaining battery time
(l 22)
*2
R 1h20m Remaining time for motion
picture recording (l 39)
0h00m00s Elapsed recording time
(l 39)
NOV 15 2010
12:34PM
Date indication (l 32)
Time indication (l 32)
World time setting (l 33)
/////
Motion picture recording mode (l 42)
Long recording mode (l 41)
Built-in memory recording
possible status
*1
HDD recording possible
status
*2
(White)
(Green)
Card recording possible
status
Recognizing the card
¥/; (Red) Recording
; (Green) Recording pause
SDR-T55
SDR-T50
SDR-H85
R 1h20m
0h00m00s
A
1
/
100
OPEN
0dB
MF
NOV 15 2010 12:34PM
PRE-REC
LONG REC
AWB
LSP
XP
SP
LP
LXP
LSP
LLP
LONG REC
PRE-REC (l 52)
Manual Mode (l 58)
////
Intelligent Auto Mode (l 36)
MF Manual focus (l 61)
/////
White balance (l 59)
1/100 Shutter speed (l 60)
OPEN/F2.2 Iris value (l 60)
0dB Gain value (l 60)
5////////
/
Scene mode (l 54)
// /
Power LCD (l 34)
/
Image stabilizer (l 48)
AF/AE tracking (l 49)
RELAY REC (l 55)
*1
Zoom microphone (l 56)
Wind noise canceler (l 56)
Backlight compensation
(l 51)
Soft skin mode (l 53)
/ Fade (White), Fade (Black)
(l 51)
Color night rec function
(l 53)
Intelligent contrast control
(l 52)
WEB MODE (l 51)
PRE-REC
MNL
AWB
+1
+2
-
1
A
SDR-H85&S50&T55&T50-VQT2L14_eng.book 100 ページ 2009年12月22日 火曜日 午前10時33
101
VQT2L14
Playback indications
Ø10/Ø2 Self-timer recording (l 57)
R3000 Remaining number of still
pictures (l 45)
(White)
(Red)
Still picture recording
possible status
Recording still picture
HDD Falling detection
(l 8)
*2
G
1/;/5//6//7/8/9/:/
D/E/;1/2;
Display during playback (l 62, 67)
0h00m00s Playback time (l 63)
No.10 Scene number
Repeat playback (l 66)
100-001 Motion pictures folder/file
name
100-0001 Still picture folder/file name
1 DPOF already set
(to more than 1) (l 73)
RESUME PLAY (l 66)
Protected motion pictures/
still pictures (l 71)
WEB MODE (l 51)
SDR-H85&S50&T55&T50-VQT2L14_eng.book 101 ページ 2009年12月22日 火曜日 午前10時33
102
VQT2L14
Indication of connection to
other devices
Confirmatory indications
Confirmatory indications when
a DVD burner is connected
Accessing the card (l 94)
Accessing the built-in memory
(l 94)
*1
Accessing the HDD (l 94)
*2
–– (Time
display)
The built-in battery is low.
(l 32)
Warning for face-to-face
recording (l 34)
The HDD cannot be accessed
as the Drop Detection Function
has detected that the unit was
dropped.
If it detects that the unit is
being continuously dropped,
recording may stop.
*2
Disc playback (l 83)
//////
Disc type (l 79)
Unusable disc
G
SDR-H85&S50&T55&T50-VQT2L14_eng.book 102 ページ 2009年12月22日 火曜日 午前10時33
103
VQT2L14
Others
Indications
2
Messages
Major confirmation/error messages to be indicated on the screen in text.
*1 / only
*2 only
RECOMMEND DATA BACK UP PERIODICALLY.
*1*2
We recommend backing up important recorded motion pictures and still pictures
periodically to a PC, DVD disc etc. to protect it. This message does not indicate that there
is a problem with this unit.
HDD BACKUP RECOMMENDED.
*2
There is a possible problem with the HDD. Copy the motion pictures and still pictures
stored on the HDD to a PC or a DVD disc immediately (l 79, 86), and detach the power
and contact consumer support. (l 124, 125)
HDD ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.
*2
Access to HDD failed. Turn on the power again. Make sure not to give a strong shock or
impact to the unit.
CANNOT OPERATE DUE TO LOW TEMPERATURE.
*2
The internal temperature of this unit is extremely low so it cannot be operated.
If “Please Wait.” appears after this message, wait a while without turning the unit off. It
may take time until the unit can be used.
SDR-T55
SDR-T50
SDR-H85
CHECK CARD.
This card is not compatible or it cannot be recognized by the unit.
If this message appears even though motion pictures and still pictures are recorded on
an SD card, the card may be unstable. Reinsert the SD card, then turn the power off and
then on again.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 103 ページ 2009年12月22日 火曜日 午前10時33
104
VQT2L14
If faulty management information is found, the messages may appear. Be sure to follow
directions in the messages. (Repairing may take time depending on the error.)
The above message is displayed when abnormal management information is detected
when the scenes are displayed in thumbnail. To perform the repair, select the scene with
in the thumbnail, and start the playback. Please be aware that if the repair fails,
scenes with will be deleted.
Use a sufficiently charged battery or the AC adaptor.
Depending on the condition of the data, it may not be possible to completely repair the
data.
If recovery fails, recorded scene playback will be impossible before power is turned OFF.
When data recorded on another device is recovered, it may not be possible to play back
the data on this unit or the other device.
If recovery fails, turn the power of the unit off and on again after waiting a while. If recovery
fails repeatedly, format a media on the unit. Please be aware that if a media is formatted,
then all the data recorded on the media will be erased.
If the thumbnail information is recovered, displaying the thumbnails may become slower.
THIS BATTERY CANNOT BE USED.
Use a battery that is compatible with this unit. (l 19)
If using a Panasonic battery compatible with this unit, remove the battery and then
insert it again. If the message appears even after repeating this several times, this unit
needs repair. Detach the power and contact consumer support. (l 124, 125) Do not
attempt to repair it by yourself.
You are attempting to connect an AC adaptor not compatible with this unit. Use the
supplied AC adaptor. (l 20)
PLEASE CHECK EXTERNAL DRIVE OR DISC.
A disc that cannot be used when connecting the unit to the DVD burner has been
inserted, or the DVD burner is not recognized properly. Connect the Mini AB USB
Connection Cable again and insert a disc to copy the data. (l 79)
About recovery
SOME SCENES NEED REPAIRING. PLAY SCENES TO BE REPAIRED.
(IRREPARABLE SCENES WILL BE DELETED.)
SDR-H85&S50&T55&T50-VQT2L14_eng.book 104 ページ 2009年12月22日 火曜日 午前10時33
105
VQT2L14
Others
Helpful hints
1
Functions that cannot be
used simultaneously
Some functions in this unit are disabled or cannot be selected due to the unit’s
specifications.
Functions Conditions which disable the functions
Intelligent Auto Mode In Manual Mode
When the Color night rec function is used
AF/AE tracking In Manual Mode
When the Color night rec function is used
Fade When PRE-REC is used
Auto slow shutter When the Scene mode is used
Backlight compensation When the Color night rec function is used
When the iris/gain is set
Intelligent contrast control When the Color night rec function is used
When the iris/gain is set
Color night rec When the AF/AE tracking is used
MF assist function When Digital Zoom (78k or higher) is used
Shutter sound While recording motion pictures
When PRE-REC is used
Shooting guide When the AF/AE tracking is used
Zoom microphone When the Intelligent auto mode is on
Soft skin mode (Set and
cancel)
While recording
When PRE-REC is used
Color night rec (Set and
cancel)
Change of white balance When Digital Zoom (78k or higher) is used
When the Color night rec function is used
When the Beach, Sunset, Fireworks or Night scenery
mode of Scene mode is used
Adjusting the shutter speed,
iris/gain
When the Color night rec function is used
When the Scene mode is used
WEB MODE When PRE-REC is used
SDR-H85&S50&T55&T50-VQT2L14_eng.book 105 ページ 2009年12月22日 火曜日 午前10時33
106
VQT2L14
Others
Helpful hints
2
Troubleshooting
Problem Check points
This unit cannot be
turned on.
This unit does not stay
on long enough.
Battery runs down
quickly.
Charge the battery again to ensure it is sufficiently
charged. (l 20)
In cold places, the battery using time becomes
shorter.
The battery has a limited life. If the operating time is
still too short even after the battery is fully charged,
the battery has worn out and needs to be replaced.
This unit is turned off
automatically.
If you do not use the unit for approximately
5 minutes, the power is automatically turned off to
conserve battery life. To resume recording, turn the
power back on.
The power will not turn off automatically when the
economy function (l 29) is set to [OFF].
When this unit is connected to a DVD burner to copy
or play back images (a disc is being accessed), the
power turns off automatically if the Mini AB USB
Connection Cable is removed.
A clicking sound is
heard when the unit is
shaken.
This is the sound of the lens moving and is not a
defect.
This sound will no longer be heard when the unit’s
power is turned on.
Remaining battery
indication is not
displayed properly.
The remaining battery capacity indication is an
approximation.
If you think the remaining battery capacity indication
is not displayed correctly, fully charge the battery,
discharge it and then charge it again. (Even if this
operation is performed, it may not be possible to
display the remaining battery capacity correctly if the
battery was used for a long period of time where the
temperature was low or high or if the battery was
repeatedly charged.)
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 106 ページ 2009年12月22日 火曜日 午前10時33
107
VQT2L14
Problem Check points
This unit cannot be
operated though it is
turned on.
This unit does not
operate normally.
Remove the battery or AC adaptor, wait about
1 minute and then reconnect the battery or AC
adaptor. Then about 1 minute later, turn on the
power again. (Conducting the above operation while
the media is being accessed may damage the data
on the media.)
If normal operation is still not restored, detach the
power connected, and contact consumer support.
(l 124, 125)
The remaining time
indication or the
elapsed time
indication is not
shown.
If you set [SETUP] > [DISPLAY] > [OFF],
indications other than warnings and date etc. are not
displayed. (l 29)
The unit arbitrarily
stops recording.
Use an SD card that can be used for motion picture
recording. (l 23)
The recordable time may have shortened due to the
deterioration of the data writing speed or repeated
recording and deletion. Using the unit, format the SD
card, built-in memory or HDD (l 76)
If the unit is exposed to strong vibrations or shocks
while recording on HDD, recording may stop to
protect the HDD. If the unit is used in a place with
loud sounds, the recording may stop due to sound
vibrations. Recording data on an SD card is
recommended in these places.
Auto focus function
does not work.
Set the Intelligent Auto Mode to on.
If you are trying to record a scene which is hard to
bring into focus in Auto Focus Mode, use the Manual
Focus Mode to adjust the focus. (l 36, 61)
Color balance of
images is strange
when recording in a
place such as a
gymnasium.
In a place with multiple light sources, such as a
gymnasium or a hall, set the white balance setting to
(Indoor mode2). If you cannot record clearly
with the (Indoor mode2), set it to (Manual
adjustment mode). (l 59)
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 107 ページ 2009年12月22日 火曜日 午前10時33
108
VQT2L14
Any scenes/still
pictures cannot play
back.
Any scenes/still pictures where the thumbnails are
displayed as cannot be played back.
Although this unit is
correctly connected to
a TV, images cannot
be seen.
The images are
squeezed horizontally.
Please read the operating instructions of your TV
and select the channel that matches the input used
for the connection.
Change the [TV ASPECT] setting to match the
aspect ratio of the TV. (l 78)
Scenes cannot be
deleted.
Release the protect setting. (l 71)
Any scenes/still pictures where the thumbnails are
displayed as cannot be deleted. If the scenes/
still pictures are unnecessary, format the media to
erase the data. (l 76) Please be aware that if a
media is formatted then all the data recorded on the
media is erased and cannot be recovered. Back up
important data on a PC, disc etc.
If the SD card is
inserted in this unit, it
is not recognized.
If the SD card is formatted on a PC, it may not be
recognized by this unit. Use this unit to format SD
cards. (l 76)
If the SD card is
inserted in another
device, it is not
recognized.
Check that the device is compatible with the capacity
or type of SD card (SD Memory Card/SDHC Memory
Card/SDXC Memory Card) that you inserted. Refer
to the operating instructions of the device for details.
“ERROR OCCURRED.
PLEASE TURN UNIT
OFF, THEN TURN ON
AGAIN.” is displayed.
The unit has automatically detected an error. Restart
the unit by turning the power off and on.
The power will be turned off in about 1 minute if the
power is not turned off and on.
Repair is needed if it is repeatedly displayed even if
it is restarted. Detach the power connected, contact
consumer support. (l 124, 125) Do not attempt to
repair the unit by yourself.
Problem Check points
SDR-H85&S50&T55&T50-VQT2L14_eng.book 108 ページ 2009年12月22日 火曜日 午前10時33
109
VQT2L14
When connected by
the USB cable, this
unit is not detected by
the PC.
After re-inserting the SD card into the unit, reconnect
the supplied USB cable.
Select another USB terminal on the PC.
Check the operating environment. (l 89)
Connect the supplied USB cable again after
restarting the PC and turning on this unit again.
When the USB cable is
disconnected, an error
message will appear
on the PC.
To disconnect the USB cable safely, double-click the
icon in the task tray and follow the instructions
on the screen.
The power of the DVD
burner cannot be
turned on.
When the unit is connected to the DVD burner, use
the respective AC adaptors for both this unit and the
DVD burner.
The sound does not
play back properly
when a DVD disc that
has been copied using
the DVD burner is
played back.
When the scenes recorded on an SD card by setting
[AUDIO REC] to [MPEG] are copied to a DVD disc
using the DVD burner and then played back with any
other devices, sound may not play back properly.
In this case, record scenes by setting [AUDIO REC]
to [DOLBY] and then copy to the disc. Or use the
software supplied with this unit to copy the scenes.
Cannot see the PDF
operating instructions
for VideoCam Suite
3.0.
You will need Adobe Acrobat Reader 5.0 or later or
Adobe Reader 7.0 or later to read the PDF operating
instructions for VideoCam Suite 3.0.
Problem Check points
SDR-H85&S50&T55&T50-VQT2L14_eng.book 109 ページ 2009年12月22日 火曜日 午前10時33
110
VQT2L14
Others
Cautions for use
The unit and the SD card become warm
during use. This is not a malfunction.
Keep the SD Video Camera, SD/HDD Video
Camera as far away as possible from
electromagnetic equipment (such as
microwave ovens, TVs, video games etc.).
If you use the SD Video Camera, SD/HDD
Video Camera on top of or near a TV, the
pictures and sound on the SD Video
Camera, SD/HDD Video Camera may be
disrupted by electromagnetic wave radiation.
Do not use the SD Video Camera,SD/HDD
Video Camera near cell phones because
doing so may result in noise adversely
affecting the pictures and sound.
Recorded data may be damaged, or pictures
may be distorted, by strong magnetic fields
created by speakers or large motors.
Electromagnetic wave radiation generated
by microprocessors may adversely affect the
SD Video Camera, SD/HDD Video Camera,
disturbing the pictures and sound.
If the SD Video Camera, SD/HDD Video
Camera is adversely affected by
electromagnetic equipment and stops
functioning properly, turn the SD Video
Camera, SD/HDD Video Camera off and
remove the battery or disconnect AC
adaptor. Then reinsert the battery or
reconnect AC adaptor and turn the SD Video
Camera, SD/HDD Video Camera on.
Do not use the
SD Video Camera, SD/HDD
Video Camera
near radio transmitters or
high-voltage lines.
If you record near radio transmitters or
high-voltage lines, the recorded pictures
and sound may be adversely affected.
Make sure to use the supplied cords and
cables. If you use optional accessories, use
the cords and the cables supplied with them.
Do not extend the cords and the cables.
Do not spray insecticides or volatile
chemicals onto the unit.
If the unit is sprayed with such chemicals,
its body may be marred and the surface
finish may peel off.
Do not leave rubber or plastic products in
contact with the unit for a long time.
When you use the unit in a sandy or
dusty place such as a beach, do not let
sand or fine dust get into the body and
terminals of the unit.
Also, keep the unit away from sea water.
Sand or dust may damage the unit. (Care
should be taken when inserting and
removing a card.)
If sea water splashes onto the unit, wipe
off the water with a well wrung cloth. Then
wipe the unit again with a dry cloth.
When carrying the unit, do not drop or
bump it.
A strong impact can break the unit’s
casing, causing it to malfunction.
Cleaning
Before cleaning, detach the battery or pull
the AC cable from the AC outlet, and then
wipe the unit with a soft, dry cloth.
If the unit is very dirty, dip a cloth in water and
squeeze firmly, and then wipe the unit with the
damp cloth. Next, dry the unit with a dry cloth.
Use of benzine, paint thinner, alcohol, or
dishwashing liquid may alter the camera
body or peel the surface finish. Do not use
these solvents.
When using a chemical dust cloth, follow
the instructions that came with the cloth.
About this unit
SDR-H85&S50&T55&T50-VQT2L14_eng.book 110 ページ 2009年12月22日 火曜日 午前10時33
111
VQT2L14
Do not use the unit for surveillance
purposes or other business uses.
This unit was designed for consumer
intermittent use. It was not intended for
continuous use, or for any industrial or
commercial application resulting in
prolonged use.
In certain situations, continuous use could
cause the unit to overheat and cause a
malfunction. Such use is strongly
discouraged.
When you are not going to use the unit
for an extended time
When storing the unit in a cupboard or
cabinet, it is recommended that you place
a desiccant (silica gel) in with it.
//
When disposing of or giving away this
unit, note that:
Formatting and deletion simply change the
file management information and cannot
be used to completely erase the data in
built-in memory or HDD of this unit. The
data can be recovered using commercially
available software or the like.
We recommend that you physically format
the built-in memory or HDD before
disposing of or giving away this unit.
/ To physically
format the built-in memory, connect the
unit via the AC adaptor, select [FORMAT
MEDIA] # [Built-inMemory] from the
menu, and then press and hold the delete
button on the screen below for about 3
seconds. When the built-in memory data
deletion screen appears, select [YES],
and then follow the on-screen instructions.
To physically format the
HDD, connect the unit via the AC adaptor,
select [FORMAT MEDIA] # [HDD] from
the menu, and then press and hold the
delete button on the screen below for
about 3 seconds. When the HDD data
deletion screen appears, select [YES],
and then follow the on-screen instructions.
Please look after the data in your built-in
memory or HDD carefully. Panasonic will
not be held responsible in the unlikely
case that private data is divulged.
The battery used in this unit is a
rechargeable lithium-ion battery. It is
susceptible to humidity and temperature and
the effect increases the more the
temperature rises or falls. In cold areas, the
full charge indication may not appear or the
low battery indication may appear about
5 minutes after starting use. At high
temperatures, the protection function may
be triggered, making it impossible to use the
unit.
Be sure to detach the battery after use.
If the battery is left attached, a minute
amount of current continues to flow even if
the unit’s power is off. Keeping the unit in
this state may result in over discharge of
the battery. This may result in you not
being able to use the battery even after it
is charged.
The battery should be stored in the vinyl
bag so metal does not come into contact
with the terminals.
The battery should be stored in a cool
place free from humidity, with as constant
temperature as possible. (Recommended
SDR-T55
SDR-T50
SDR-H85
SDR-T55
SDR-T50
About the battery
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 111 ページ 2009年12月22日 火曜日 午前10時33
112
VQT2L14
temperature: 15 °C to 25 °C (59 °F to
77 °F), Recommended humidity: 40% to
60%)
Extremely high temperatures or low
temperatures will shorten the life of the
battery.
If the battery is kept in high-temperature,
high-humidity, or oily-smoky places, the
terminals may rust and cause
malfunctions.
To store the battery for a long period of
time, we recommend you charge it once
every year and store it again after you
have completely used up the charged
capacity.
Dust and other matter attached to the
battery terminals should be removed.
Prepare spare batteries when going out
for recording.
Prepare batteries enough to last for 3 to 4
times the period you are planning to
record for. Cold places such as a ski resort
can shorten recording time.
If you drop the battery accidentally,
check to see if the terminals are
damaged.
Inserting a battery with damaged terminals
can damage the unit.
Do not throw an old battery into fire.
Heating a battery or throwing it into a fire
may result in an explosion.
If the operating time is very short even
after the battery has been recharged, the
battery has worn out. Please purchase a
new battery.
If the temperature of the battery is
extremely high or extremely low, charging
may take time or the battery may not be
charged.
If you use the AC adaptor near a radio,
radio reception may be disturbed. Keep
the AC adaptor 1 m (3.3 feet) or more
away from the radio.
When using the AC adaptor, it may
generate whirring sounds. However, this is
normal.
After use, be sure to disconnect the AC
adaptor. (If it is left connected, a minute
amount of current is consumed.)
Always keep the electrodes of the AC
adaptor and battery clean.
About the AC adaptor
SDR-H85&S50&T55&T50-VQT2L14_eng.book 112 ページ 2009年12月22日 火曜日 午前10時33
113
VQT2L14
When the status indicator is flashing at a
particularly fast or slow rate, the
following should be considered.
Flashing with approx. 4 second period
(off for approx. 2 seconds, on for approx.
2 seconds):
The battery may be over-discharged, or
the battery temperature may be high or
low. The battery will charge, but it may
take several hours for normal charging to
begin.
Flashing with approx. 0.5 second period
(off for approx. 0.25 second, on for
approx. 0.25 second):
The battery is not charged. Remove the
battery from the unit, and try charging
again.
Check that the terminals of the unit or
battery are not dirty or covered in a foreign
object, and connect the battery correctly
once again. If a foreign object or dirt is
present, turn off the unit before removing.
The battery or environment is at an
extremely high or low temperature. Wait
until the temperature has returned to an
appropriate level and try charging again. If
you are still unable to charge, there may
be a fault in the unit, battery or AC
adaptor.
Lamp turns off:
Charging has finished.
If the status indicator stays off despite the
charging being unfinished, there may be a
fault in the unit, battery or AC adaptor.
Contact consumer support. (l 124, 125)
Refer to page 111 for details on the
battery.
The memory capacity indicated on the
label of an SD card is the total of the
capacity for copyright protection and
management and the capacity which can
be used on the unit, a PC etc.
Do not apply strong shocks, bend, or drop
the SD card.
Electrical noise, static electricity or the
failure of this unit or the SD card may
damage or erase the data stored on the
SD card.
During long periods of use, it is normal for
this unit and the SD card to become
slightly warm and is not a malfunction.
When the card access lamp is lit, do not:
jRemove the SD card
jTurn the unit off
jInsert and remove the USB cable
jExpose the unit to vibrations or shock
Cautionary points when handling
Do not expose the terminals of the SD
card to water, garbage or dust.
Do not place SD cards in the following
areas:
jAreas exposed to direct sunlight, or in
high-temperature areas such near
heating equipment.
jIn very dusty or humid areas.
jLocations susceptible to significant
difference in temperature (condensation
can occur).
jWhere static electricity or
electromagnetic waves occur.
To protect SD cards, return them to their
cases when you are not using them.
When disposing of or giving away an SD
card, note that:
Formatting and deletion simply change the
file management information and cannot
be used to completely erase the data in an
SD card.
We recommend that you physically format
an SD card before disposing of or giving
away the SD card.
About charging errors About SD cards
SDR-H85&S50&T55&T50-VQT2L14_eng.book 113 ページ 2009年12月22日 火曜日 午前10時33
114
VQT2L14
To physically format an SD
card, connect the unit via the AC adaptor,
select [FORMAT CARD] from the menu,
and then press and hold the delete button
on the screen below for about 3 seconds.
When an SD card data deletion screen
appears, select [YES], and then follow the
on-screen instructions.
//
To physically format an SD
card, connect the unit via the AC adaptor,
select [FORMAT MEDIA] # [SD CARD]
from the menu, and then press and hold
the delete button on the screen below for
about 3 seconds. When an SD card data
deletion screen appears, select [YES],
and then follow the on-screen instructions.
Please look after the data in an SD card
carefully.
When the LCD monitor gets dirty, wipe it
with a soft cloth such as eye glass cleaner.
In a place with drastic temperature
changes, condensation may form on the
LCD monitor. Wipe it with a soft cloth such
as eye glass cleaner.
When the unit has become very cold, for
example due to storage in a cold area, its
LCD monitor will be slightly darker than
usual immediately after the power is
turned on. The normal brightness will be
restored when the unit’s internal
temperature rises.
SDR-S50
SDR-T55
SDR-T50
SDR-H85
LCD monitor
Extremely high precision technology is
employed to produce the LCD Monitor
screen featuring a total of approximately
123,000 dots. The result is more than
99.99% effective dots with a mere 0.01%
of the dots inactive or always lit.
However, this is not a malfunction and
does not affect the recorded picture.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 114 ページ 2009年12月22日 火曜日 午前10時33
115
VQT2L14
When condensation forms on the unit, the
lens will cloud up and the unit may not work
properly. Make every effort to ensure that
condensation does not form. If it does form,
take the actions described below.
Causes of condensation
Condensation takes place when the
ambient temperature or humidity is
changed as follows.
When this unit is brought inside from the
cold (e.g. a ski slope) to a warm room.
When this unit is moved from an
air-conditioned car to outside.
When a cold room has been warmed up
quickly.
When cool wind from an air conditioner is
directly blown onto this unit.
After summer afternoon showers of rain.
When this unit is in a very humid place
where the air is thick with steam. (e.g. a
heated swimming pool)
Helpful hint
If, for example, you have used this unit for
recording on a ski slope and are taking it into
a heated room, place the unit inside a plastic
bag, remove as much of the air from inside
the bag as possible, then seal the bag.
Leave the unit for about an hour in the room
so the temperature of the unit is close to the
ambient temperature of the room, then use
it.
About condensation
SDR-H85&S50&T55&T50-VQT2L14_eng.book 115 ページ 2009年12月22日 火曜日 午前10時33
116
VQT2L14
Others
Specifications
SD Video Camera / /
SD/HDD Video Camera
Information for your safety
Power source: DC 5.0 V (When using AC adaptor)
DC 3.6 V (When using battery)
Power consumption: Recording:
//
2.9 W
3.5 W
Charging:
//
7.7 W
7.7 W
SDR-S50
SDR-T55
SDR-T50
SDR-H85
SDR-S50
SDR-T55
SDR-T50
SDR-H85
SDR-S50
SDR-T55
SDR-T50
SDR-H85
Signal system EIA Standard: 525 lines, 60 fields NTSC color signal
Recording
format
SD card Normal recording mode: Based on the SD-Video standard
Built-in
memory
/ Normal recording mode:
Independent standard
HDD Normal recording mode:
Independent standard
Long recording mode: Independent standard
Image sensor 1/8z CCD image sensor
Total: 800 K
Effective pixels: 520 K (4:3), 470 K (16:9)
Lens Auto Iris, F1.9 to F5.7
Focal length: 1.48 mm to 104 mm
Macro (Wide range AF)
35 mm equivalent:
Optical zoom:
37.4 mm to 2625 mm (4:3)
36.5 mm to 2571 mm (16:9)
Enhanced optical zoom:
33.5 mm to 2625 mm (4:3)
32.8 mm to 2571 mm (16:9)
Minimum focus distance:
Approx. 2 cm (0.8 q) (Wide)/Approx. 1.5 m (4.9 feet) (Tele)
Zoom 70k optical zoom, 78k enhanced optical zoom, 100k/3500k
digital zoom
Monitor 2.7z wide LCD monitor (approx. 123 K dots)
Microphone Stereo (with a zoom function)
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 116 ページ 2009年12月22日 火曜日 午前10時33
117
VQT2L14
Speaker 1 round speaker
White balance
adjustment
Auto tracking white balance system
Standard illumination 1,400 lx
Minimum required
illumination
Approx. 5 lx (1/30 in Low light mode)
Approx. 2 lx with the Color night rec function
AV terminal video
output level
1.0 Vp-p, 75 h, NTSC system
AV terminal audio
output level (Line)
316 mV, 600 h
USB SD card Read/Write (No copyright protection support)
Built-in
memory
/ Read only
HDD Read only
Hi-Speed USB (USB 2.0), USB terminal Type Mini AB
Dimensions /
/
54.9 mm (W)k64 mm (H)k107.3 mm (D)
[2.16 q (W)k2.52 q (H)k4.22 q (D)]
(excluding projecting parts)
55.1 mm (W)k64 mm (H)k107.3 mm (D)
[2.17 q (W)k2.52 q (H)k4.22 q (D)]
(excluding projecting parts)
Mass (Weight) Approx. 212 g
(Approx. 0.47 lbs.)
[without battery (supplied) and an SD card
(optional)]
/ Approx. 213 g
(Approx. 0.47 lbs.)
[without battery (supplied)]
Approx. 273 g
(Approx. 0.6 lbs.)
[without battery (supplied)]
SDR-T55
SDR-T50
SDR-H85
SDR-S50
SDR-T55
SDR-T50
SDR-H85
SDR-S50
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 117 ページ 2009年12月22日 火曜日 午前10時33
118
VQT2L14
Motion pictures
Mass (Weight) in
operation
Approx. 239 g
(Approx. 0.53 lbs.)
[with battery (supplied) and an SD card
(optional)]
/ Approx. 238 g
(Approx. 0.52 lbs.)
[with battery (supplied)]
Approx. 317.5 g
(Approx. 0.7 lbs.)
[with battery (supplied)]
Operating temperature Cto4C (3Fto10F)
Operating humidity 10% to 80%
Battery operation time See page 21
Recording
media
SD card SD Memory Card:
512 MB, 1 GB, 2 GB (FAT12 and FAT16 system compliant)
SDHC Memory Card:
4 GB, 6 GB, 8 GB, 12 GB, 16 GB, 24 GB, 32 GB (FAT32
system compliant)
SDXC Memory Card:
48 GB, 64 GB (exFAT system compliant)
Built-in
memory
8GB
4GB
HDD 80 GB
Compression Normal recording mode: MPEG-2
Long recording mode: MPEG-4 AVC/H.264
Recording mode and
transfer rate
XP: Approx. 10 Mbps (VBR)
SP: Approx. 5 Mbps (VBR)
LP: Approx. 2.5 Mbps (VBR)
LXP: Approx. 5 Mbps (VBR)
LSP: Approx. 2.5 Mbps (VBR)
LLP: Approx. 1.25 Mbps (VBR)
Refer to page 42 for the recordable time.
Picture size 640k480 (4:3), 640k360 (16:9)
Audio
compres-
sion
SD card Normal recording mode: Dolby Digital/MPEG-1 Audio Layer 2
Built-in
memory
/ Normal recording mode: Dolby Digital
HDD Normal recording mode: Dolby Digital
Long recording mode: AAC
16 bit (48 kHz)
SDR-S50
SDR-T55
SDR-T50
SDR-H85
SDR-T55
SDR-T50
SDR-H85
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 118 ページ 2009年12月22日 火曜日 午前10時33
119
VQT2L14
Still pictures
AC adaptor
Information for your safety
Specifications may change without prior notice.
Recording
media
SD card SD Memory Card:
8MB, 16MB, 32MB, 64MB, 128MB, 256MB, 512MB,
1 GB, 2 GB (FAT12 and FAT16 system compliant)
SDHC Memory Card:
4 GB, 6 GB, 8 GB, 12 GB, 16 GB, 24 GB, 32 GB (FAT32
system compliant)
SDXC Memory Card:
48 GB, 64 GB (exFAT system compliant)
Built-in
memory
8GB
4GB
HDD 80 GB
Compression JPEG (Design rule for Camera File system, based on Exif 2.2
standard), DPOF corresponding
Picture size 640k480 (4:3), 640k360 (16:9)
Refer to page 46 for the number of recordable pictures.
Power source:
Power consumption:
DC output:
AC 110 V to 240 V, 50/60 Hz
12 W
DC 5.0 V, 1.6 A (Unit operation)
Dimensions 46 mm (W)k25 mm (H)k75.5 mm (D)
[1.8 q (W)k1.0 q (H)k3.0 q (D)]
Mass (Weight) Approx. 115 g (Approx. 0.25 lbs.)
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 119 ページ 2009年12月22日 火曜日 午前10時33
120
VQT2L14
Optional accessories
Accessory No. Figure Description
VW-BC10PP Battery Charger
VW-VBL090
*1
(SDR-S50)
(SDR-T55/SDR-T50)
Rechargeable Lithium Ion Battery
Pack
VW-VBK180
*1
Rechargeable Lithium Ion Battery
Pack
VW-VBK360
*1
Rechargeable Lithium Ion Battery
Pack
VW-LDC103PP
*2
Video DC Light
VZ-LL10PP Light bulb for video DC light
VW-SK12PP Shoe adaptor
VW-ACK180PP Accessory kit
SDR-H85&S50&T55&T50-VQT2L14_eng.book 120 ページ 2009年12月22日 火曜日 午前10時33
121
VQT2L14
*1 Please refer to page 21, concerning the battery charging time and available recording
time.
*2 The shoe adaptor VW-SK12PP (optional) is necessary.
NOTE:
Accessories and/or model numbers may vary by country. Please consult your local
dealer.
Product numbers correct as of December 2009. These may be subject to change.
Accessory No. Figure Description
RP-SDR08GU1A
RP-SDR04GU1A
RP-SDR02GU1A
Class 2 8 GB SDHC Memory Card
Class 2 4 GB SDHC Memory Card
Class 2 2 GB SD Memory Card
RP-SDP16GU1K
RP-SDP12GU1K
RP-SDP08GU1K
RP-SDP04GU1K
RP-SDP02GU1K
Class 4 16 GB SDHC Memory Card
Class 4 12 GB SDHC Memory Card
Class 4 8 GB SDHC Memory Card
Class 4 4 GB SDHC Memory Card
Class 4 2 GB SD Memory Card
RP-SDW64GU1K
RP-SDW48GU1K
RP-SDW32GU1K
RP-SDW16GU1K
RP-SDW08GU1K
RP-SDW04GU1K
RP-SDW02GU1K
Class 10 64 GB SDXC Memory Card
Class 10 48 GB SDXC Memory Card
Class 10 32 GB SDHC Memory Card
Class 10 16 GB SDHC Memory Card
Class 10 8 GB SDHC Memory Card
Class 10 4 GB SDHC Memory Card
Class 6 2 GB SD Memory Card
VW-BN2 DVD burner
SDR-H85&S50&T55&T50-VQT2L14_eng.book 121 ページ 2009年12月22日 火曜日 午前10時33
122
VQT2L14
In CANADA, please contact your local Panasonic dealer for more information on
Accessories.
Accessory Order Form (For USA and Puerto Rico
Customers)
TO OBTAIN ANY OF OUR ACCESSORIES YOU CAN DO ANY OF
THE FOLLOWING:
VISIT YOUR LOCAL PANASONIC DEALER
OR
CALL PANASONIC’S ACCESSORY ORDER LINE AT 1-800-332-5368
[6 AM-6 PM M-F, PACIFIC TIME]
OR
MAIL THIS ORDER TO: PANASONIC SERVICE AND TECHNOLOGY COMPANY ACCESSORY ORDER OFFICE
20421 84th
Avenue South Kent, WA. 98032
Ship To:
Mr.
Mrs.
Ms.
First Last
Street Address
City State Zip
Phone#:
Day
( )
Night ( )
4. Shipping information (UPS delivery requires complete street address)
Please photocopy this form when placing an order.
3. Method of payment (check one)
Check of Money Order enclosed (NO C.O.D.SHIPMENTS)
VISA
MasterCard
Make Check or Money Order Payable to: PANASONIC ACCESSORIES
(Please do not send cash)
2. Items Ordered
QuantityAccessory # Price Each Description
Total Price
6.95
Subtotal
Your State & Local Sales Tax
Shipping & Handling
Total Enclosed
1. Model #
Discover
Expiration Date
Credit Card #
Customer Signature
SDR-H85&S50&T55&T50-VQT2L14_eng.book 122 ページ 2009年12月22日 火曜日 午前10時33
123
VQT2L14
Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Camcorder Products
Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only)
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Consumer Electronics Company (referred to as “the warrantor”) will, for the length of
the period indicated on the chart below, which starts with the date of original purchase (“warranty
period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it
with a new or a refurbished equivalent value product, or (c) refund your purchase price. The
decision to repair, replace or refund will be made by the warrantor.
Product or Part Name Parts Labor
syad 09 raey 1 redrocmaC
Rechargeable Batteries (defective exchange) 10 days Not Applicable
SD Memory Cards (defective exchange) 90 days Not Applicable
During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty
period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for
non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies
to products purchased and serviced in the United States or Puerto Rico. This warranty is
extended only to the original purchaser of a new product which was not sold “as is”.
Carry-In or Mail-In Service
To find a service center please visit http://www.panasonic.com/help or call 1-800-211-PANA
(7262).
When shipping the unit, carefully pack, include all accessories, and send it prepaid, adequately
insured and preferably in the original carton. If Lithium Ion batteries are shipped by air the
package must be labeled “Contains Lithium Ion Battery (No lithium metal)”. Damaged batteries
are prohibited from shipment by US Mail. Batteries must be securely packed in a manner to
prevent short-circuiting and a package cannot contain more than 3 Lithium Ion batteries. Include
a letter detailing the complaint, a return address and provide a daytime phone number where you
can be reached. A valid registered receipt is required under the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE
REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE
OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE
CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF
PURCHASE.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES
NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT
COVER damages which occurred in shipment, or failures which are caused by products not
supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect,
mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of
consumer controls, improper maintenance, power line surge, lightning damage, modification,
introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or
other business or rental use of the product, or service by anyone other than a Factory Service
Center or other Authorized Servicer, or damage that is attributable to acts of God.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 123 ページ 2009年12月22日 火曜日 午前10時33
124
VQT2L14
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED
WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF
THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or
damage to media or images, data or other memory or recorded content. The items listed are not
exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or
limitations on how long an implied warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from
state to state. If a problem with this product develops during or after the warranty period, you
may contact your dealer or Service Center. If the problem is not handled to your satisfaction,
then write to the warrantor’s Consumer Affairs Department at the addresses listed for the
warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE
YOUR RESPONSIBILITY.
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your nearest
Dealer or Service Center; purchase Parts and Accessories; or make Customer
Service and Literature requests by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm, Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all Panasonic Products
by visiting our Web Site at:
http://www.pstc.panasonic.com
Or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic Service and Technology Company
20421 84th Avenue South, Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express, and Personal
Checks)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
As of November 2009
SDR-H85&S50&T55&T50-VQT2L14_eng.book 124 ページ 2009年12月22日 火曜日 午前10時33
125
VQT2L14
Warranty (For Canadian Customers)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and
agrees to remedy any such defect for a period as stated below from the date of original purchase.
Camcorder Product – One (1) year, parts and labour
LIMITATIONS AND EXCLUSIONS
This warranty does not apply to products purchased outside Canada or to any product which has been
improperly installed, subjected to usage for which the product was not designed, misused or abused,
damaged during shipping, or which has been altered or repaired in any way that affects the reliability or
detracts from the performance, nor does it cover any product which is used commercially. Dry cell
batteries are also excluded from coverage under this warranty.
This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of
date of original purchase is required before warranty service is performed.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR
CONSEQUENTIAL DAMAGES.
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions
may not be applicable.
WARRANTY SERVICE
FOR PRODUCT OPERATION ASSISTANCE, please contact:
Our Customer Care Centre: Telephone #: (905) 624-5505
1-800 #: 1-800-561-5505
Fax #: (905) 238-2360
Email link: “Customer support” on www.panasonic.ca
FOR PRODUCT REPAIRS, please locate your nearest Authorized Servicentre at www.panasonic.ca :
Link: “Servicentres
TM
locator” under “Customer support”
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 125 ページ 2009年12月22日 火曜日 午前10時33
126
VQT2L14
Index
A
AC adaptor . . . . . . . . . . . . . . . . . 20, 112
A/V terminal . . . . . . . . . . . . . . 16, 77, 85
AF/AE tracking . . . . . . . . . . . . . . . . . . 49
Alert sound . . . . . . . . . . . . . . . . . . . . . 30
Aspect . . . . . . . . . . . . . . . . . . . . . . . . 55
Audio rec . . . . . . . . . . . . . . . . . . . . . . . 44
Auto focus . . . . . . . . . . . . . . . . . . . . . . 37
Auto protect . . . . . . . . . . . . . . . . . . . . . 84
Auto slow shutter . . . . . . . . . . . . . . . . . 55
Automatic white balance . . . . . . . . . . . 37
B
Backlight compensation . . . . . . . . . . . . 51
Battery . . . . . . . . . . . . . . . . . . . . 19, 111
Battery capacity indication . . . . . . . . . . 22
Built-in memory . . . . . . . . . . . . . . . . . . . 7
Built-in memory information display . . . 74
C
Card . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Charging time . . . . . . . . . . . . . . . . . . . 21
Color night rec . . . . . . . . . . . . . . . . . . . 53
Copy
Disc
. . . . . . . . . . . . . . . . . . . . . . . . 81
From built-in memory to SD card . . . 75
From HDD to SD card . . . . . . . . . . . 75
From SD card to built-in memory . . . 75
From SD card to HDD . . . . . . . . . . . 75
Creating still picture from
motion picture . . . . . . . . . . . . . . . . . . . 64
D
Date and time display . . . . . . . . . . . . . 32
Date and time setting . . . . . . . . . . . . . . 32
Delete . . . . . . . . . . . . . . . . . . . . . . . . . 70
Demo mode . . . . . . . . . . . . . . . . . . . . 30
Digital zoom . . . . . . . . . . . . . . . . . . . . 47
Display . . . . . . . . . . . . . . . . . . . . . . . . 29
Dividing a scene to partially delete . . . . 72
DPOF setting . . . . . . . . . . . . . . . . . . . . 73
Dubbing . . . . . . . . . . . . . . . . . . . . . . . 85
DVD burner . . . . . . . . . . . . . . . . . . . . . 79
E
Economy . . . . . . . . . . . . . . . . . . . . . . . 29
Enhanced optical zoom . . . . . . . . . . . . 47
F
Face framing . . . . . . . . . . . . . . . . . . . . 55
Fade . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Focus . . . . . . . . . . . . . . . . . . . . . . . . . 61
Format . . . . . . . . . . . . . . . . . . . . . 76, 84
Frame-by-frame playback . . . . . . . . . . 64
G
Gain . . . . . . . . . . . . . . . . . . . . . . . . . .60
Grip belt . . . . . . . . . . . . . . . . . . . . . . . .18
Guide line . . . . . . . . . . . . . . . . . . . . . .52
H
HDD . . . . . . . . . . . . . . . . . . . . . . . . . . .7
HDD information display . . . . . . . . . . . .74
Help mode . . . . . . . . . . . . . . . . . . . . . .51
I
Image stabilizer . . . . . . . . . . . . . . . . . .48
Indications . . . . . . . . . . . . . . . . . . . . .100
Initial setting . . . . . . . . . . . . . . . . . . . . .30
Intelligent auto mode . . . . . . . . . . . . . .36
Intelligent contrast control . . . . . . . . . . .52
Iris . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
J
Joystick . . . . . . . . . . . . . . . . . . . . . . . .17
L
Language . . . . . . . . . . . . . . . . . . . . . .28
LCD monitor . . . . . . . . . . . . .16, 34, 114
Limited Warranty (Canada) . . . . . . . . .125
Limited Warranty
(USA and Puerto Rico) . . . . . . . . . . . .123
Long recording mode . . . . . . . . . . . . . .41
M
Manual focus . . . . . . . . . . . . . . . . . . . .61
Manual focus mode . . . . . . . . . . . . . . .58
Media select . . . . . . . . . . . . . . . . .29, 40
Menu . . . . . . . . . . . . . . . . . . . . . . . . . .27
MF assist . . . . . . . . . . . . . . . . . . . . . . .61
Mode switch . . . . . . . . . . . . . . . . . .17, 26
N
Number of recordable pictures . . . . . . .46
O
Operation icons . . . . . . . . . . . . . . . . . .50
P
Picture size . . . . . . . . . . . . . . . . . . . . .46
Playing back motion pictures by date
. . . .65
Playing back still pictures by date . . . . .69
Power button . . . . . . . . . . . . . . . . . . . .25
Power LCD . . . . . . . . . . . . . . . . . . . . .34
PRE-REC . . . . . . . . . . . . . . . . . . . . . .52
Protect . . . . . . . . . . . . . . . . . . . . . . . . .71
Q
Quick power on . . . . . . . . . . . . . . . . . .38
Quick start . . . . . . . . . . . . . . . . . . . . . .38
SDR-H85&S50&T55&T50-VQT2L14_eng.book 126 ページ 2009年12月22日 火曜日 午前10時33
127
VQT2L14
R
Recordable time . . . . . . . . . . . . . . 21, 42
Recording modes . . . . . . . . . . . . . . . . 42
Recording time elapsed . . . . . . . . . . . . 39
Recovery . . . . . . . . . . . . . . . . . . . . . . 104
Relay recording . . . . . . . . . . . . . . . . . . 55
Remaining number of still pictures . . . . 45
Remaining time left for recording . . . . . 39
Repeat playback . . . . . . . . . . . . . . . . . 66
Resume playback . . . . . . . . . . . . . . . . 66
S
Scene mode . . . . . . . . . . . . . . . . . . . . 54
SD card information display . . . . . . . . . 74
SD Memory Card . . . . . . . . . . . . . . . . . 23
SD Speed Class Rating . . . . . . . . . . . . 23
SDHC Memory Card . . . . . . . . . . . . . . 23
SDXC Memory Card . . . . . . . . . . . . . . 23
Self-recording . . . . . . . . . . . . . . . . . . . 34
Self-timer recording . . . . . . . . . . . . . . . 57
Shooting guide . . . . . . . . . . . . . . . . . . 44
Shutter sound . . . . . . . . . . . . . . . . . . . 57
Shutter speed . . . . . . . . . . . . . . . . . . . 60
Simultaneous recording . . . . . . . . . . . . 46
Slide show . . . . . . . . . . . . . . . . . . . . . 68
Slow-motion playback . . . . . . . . . . . . . 64
Soft skin mode . . . . . . . . . . . . . . . . . . . 53
Still picture compatibility . . . . . . . . . . . . 68
T
Time frame index . . . . . . . . . . . . . . . . . 65
Tripod receptacle . . . . . . . . . . . . . . . . . 18
TV aspect . . . . . . . . . . . . . . . . . . . . . . 78
V
Volume adjustment . . . . . . . . . . . . . . . 64
W
WB Adjust . . . . . . . . . . . . . . . . . . . . . . 56
WEB MODE . . . . . . . . . . . . . . . . . . . . 51
White balance . . . . . . . . . . . . . . . . . . . 59
Wind noise canceler . . . . . . . . . . . . . . 56
World time setting . . . . . . . . . . . . . . . . 33
Y
YouTube . . . . . . . . . . . . . . . . . . . . 51, 98
Z
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . 47
Zoom microphone . . . . . . . . . . . . . . . . 56
SDR-H85&S50&T55&T50-VQT2L14_eng.book 127 ページ 2009年12月22日 火曜日 午前10時33
128
VQT2L14
Spanish Quick Use Guide/Guía
española para el uso rápido
Cómo insertar la batería
Meta la batería insertándola en la dirección
señalada en la figura.
Cómo cargar la batería
1
Conectar el adaptador de CA al terminal de
entrada de CC de esta unidad.
2
Conectar el cable de CA al adaptador de CA,
luego a la salida de CA.
Enchufar el cable de CA en
2
y luego en
3
.
Insertar/extraer una tarjeta SD
1) Abrir la pantalla LCD.
2) Abrir la tapa de la tarjeta SD e insertar (extraer)
la tarjeta SD en (de) la ranura para la tarjeta.
Colocar el lado de la etiqueta
B
en la dirección
indicada en la ilustración y presionarlo con
fuerza hacia adentro todo lo posible.
Apriete el centro de la tarjeta SD y luego
extráigala.
3) Cerrar bien la tapa de la tarjeta SD.
Cómo encender la unidad
Encender y apagar el dispositivo con el botón
de alimentación
Pulse el botón de alimentación para encender el
dispositivo.
A
El indicador de estado se ilumina.
Para apagar la unidad,mantenga pulsado el
botón de alimentación hasta que el indicador
de estado se apague.
Cómo encender y apagar la unidad con la
pantalla LCD
El dispositivo se enciende al abrir el monitor
LCD, y se apaga al cerrarlo.
Para encender la unidad
A
El indicador de estado se ilumina.
Para apagar la unidad
B
El indicador de estado se apaga.
Lámpara de acceso [ACCESS]
A
Cuando esta unidad está accediendo a la
tarjeta SD o a la memoria integrada, se
enciende la lámpara de acceso.
A
Introduzca la batería hasta que dispare
y se cierre.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 128 ページ 2009年12月22日 火曜日 午前10時33
129
VQT2L14
Selección del modo
Utilice el selector de modo para cambiar el
modo a o .
Selección del idioma
1) Pulsar el botón MENU, luego
seleccionar [CONFIGURAR] #
[LANGUAGE] y presionar el joystick.
2) Seleccionar [Español] y presionar el
joystick.
Grabación de películas
1) Cambiar el modo a y abrir la
pantalla LCD.
2) Pulse el botón de inicio/parada de
grabación para iniciar la grabación.
Cuando se comienza a grabar,
;
cambia a
¥
.
Grabación de películas
1) Cambiar el modo a y abrir la
pantalla LCD.
2) Pulsar el botón .
Cómo seleccionar un medio
para grabar [SDR-T55]/
[SDR-T50]/[SDR-H85]
Seleccione el menú. (l 27)
/
Modo de grabación (
l
39, 45)
Modo de reproducción (
l
62, 67)
[SELEC MEDIO]
A VÍDEO/TARJETA SD
B VÍDEO/MEM INTERNA
C IMAGEN/TARJETA SD
D IMAGEN/MEM INTERNA
E VÍDEO/TARJETA SD
F VÍDEO/DISCO DURO
G IMAGEN/TARJETA SD
H IMAGEN/DISCO DURO
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 129 ページ 2009年12月22日 火曜日 午前10時33
130
VQT2L14
Reproducción de películas
1) Cambie el modo a .
2) Usar el joystick para seleccionar el
ícono de Selección de Modo de
Reproducción A, luego presionar el
centro del joystick.
3) Seleccionar el medio que se desea
reproducir, luego presionar el centro del
joystick.
Seleccionar [VÍDEO/TARJETA SD] para
reproducir la tarjeta SD.
/
Seleccionar [VÍDEO/MEM INTERNA] para
reproducir la memoria integrada.
Seleccionar [VÍDEO/DISCO DURO] para
reproducir el disco rígido.
4) Seleccione la escena a reproducir y, a
continuación, pulse el joystick.
5) Seleccione la operación de
reproducción con el joystick.
1/;: Reproducción/pausa
6: Rebobinado (durante la
reproducción)
5: Avance rápido (durante la
reproducción)
: Detener la reproducción y
visualizar las miniaturas.
Reproducción de fotografías
1) Cambie el modo a .
2) Usar el joystick para seleccionar el
ícono de Selección de Modo de
Reproducción A, luego presionar el
centro del joystick.
3) Seleccionar el medio que se desea
reproducir, luego presionar el centro del
joystick.
Seleccionar [IMAGEN/TARJETA SD] para
reproducir la tarjeta SD.
/
Seleccionar [IMAGEN/MEM INTERNA]
para reproducir la memoria integrada.
Seleccionar [IMAGEN/DISCO DURO]
para reproducir el disco rígido.
4) Seleccionar la imagen fija que se va a
reproducir, luego presionar el joystick.
5) Seleccionar la operación de
reproducción con el joystick.
1/;: Iniciar o hacer una pausa en la
presentación de diapositivas
(reproducción de las fotografías
contenidas en orden numérico).
2;: Reproducción de la imagen
anterior.
;1: Reproducción de la siguiente
imagen.
: Detener la reproducción y
visualizar las miniaturas.
SDR-T55
SDR-T50
SDR-H85
0h00m00s
0h00m00s
0h00m00s
SDR-T55
SDR-T50
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book 130 ページ 2009年12月22日 火曜日 午前10時33
131
VQT2L14
SDR-H85&S50&T55&T50-VQT2L14_eng.book 131 ページ 2009年12月22日 火曜日 午前10時33
VQT2L14
F1209RA0
© Panasonic Corporation 2009
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3
P
Printed in Indonesia
SDR-H85&S50&T55&T50-VQT2L14_eng.book 132 ページ 2009年12月22日 火曜日 午前10時33
114

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic SDR-H85P bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic SDR-H85P in de taal/talen: Engels als bijlage per email.

De handleiding is 6,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Panasonic SDR-H85P

Panasonic SDR-H85P Gebruiksaanwijzing - Deutsch - 116 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info