Connecting the speakers to the receiver
Caution
¡Use the speakers only with the
recommended system. Failure to do so may
lead to damage the amplifier and/or the
speakers, and may result in the risk of fire.
Consult a qualified service person if damage
has occured or if you experience a sudden
change in performance.
¡Do not attempt to attach these speakers to
walls using methods other than those
described in this manual.
Attaching to a wall
To attach vertically
Rubber feet
(included)
Rubber feet
(included)
Screw
(not included)
Screw
(not included)
106 mm
(4-11/64")
30–35 mm
(1-3/16" to 1-3/8")
7–9 mm
(9/32" to 23/64")
To attach horizontally
Screw
(not included)
Rubber feet
(included)
Attach four rubber feet to each speaker, ensuring they do not cover
the holes. Screw the wood screw into a thick and hard part of the
wall.
The surface you attach the speakers to must be able to support
over 10 kg (22 lb). Consult your dealer for details.
Note
Attaching to speaker stands
Ensure the following conditions are met when you purchase
your speaker stands.
¡Screw; diameter: 5 mm, pitch: 0.8 mm, length: thickness of stand
plate plus between 7 and 10 mm.
¡Distance between the centers of the holes; 60 mm
¡The stands must be able to support over 10 kg (22 lb).
¡The stands must be stable even if the speakers are in a high
position.
Attach the stands
with these holes.
Speaker stands (not included)
5 mm, Pitch 0.8 mm
60 mm
(2-23/64")
Plate thickness + 7 to 10 mm
(9/32"–25/64")
106 mm
(4-11/64")
30–35 mm
(1-3/16" to 1-3/8")
7–9 mm
(9/32" to 23/64")
Speaker notes
¡You can damage your speakers and shorten their useful life if you
play sound at high levels over extended periods.
¡Reduce the volume in the following cases to avoid damage.
– When playing distorted sound.
– When the speakers are receiving howling from a microphone
or record player, noise from FM broadcasts, or continuous
signals from an oscillator, test disc, or electronic instrument.
– When adjusting the sound quality.
– When turning the unit on or off.
Speaker cords
¡Connect the cords so the numbers on the stickers match the numbers under the terminals.
¡Connect the red cords to the red terminals (+) and the black cords to the black terminals (–).
¡Ensure the wire of the cords are fully inserted so they do not touch each other and short circuit.
¡After you have completed set-up and connection, wind the excess cord and keep together with string.
5
