5
Operation
Standby/on switch ( I)
Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of
power.
Operation indicator
The indicator lights red. Four seconds later it turns green to indicate
that operation is possible.
If you have connected a subwoofer, adjust the subwoofer’s volume
to suit the included speakers, then adjust the volume on this unit.
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap-and-water solution or a weak detergent solution.
¡ Never use alcohol, paint thinner or benzine to clean this unit.
¡ Before using chemically treated cloth, read the instructions that came with the cloth carefully.
Maintenance
VOLUME
VOLUME
3 Start play on
the other unit.
4 Adjust the volume.1 Turn [VOLUME] to
“MIN”.
Operation
indicator
I
2 Press [ I] to turn
on the unit.
If irregular colouring occurs on your television
These speakers are designed to be used close to a television,
but the picture may be affected with some televisions and set-up
combinations.
If this occurs, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the problem.
If it persists, move the speakers further away from the television.
