612781
31
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
Operations
SQT0935
31
The default setting is underlined. Changed settings will
be kept until it is changed again, unless otherwise
indicated.
REAR LEVEL
You can adjust the output
level of the rear surround
speakers. Pair SC-ALL2 (sold
separately) with this system
beforehand. (> 32)
1
Press [4][3] to select the output
level of the left surround speaker
and press [OK]. (REAR L)
2 Press [4][3] to select the output
level of the right surround speaker
and press [OK]. (REAR R)
You can adjust the output level
between j6 and i6. The default
setting is 0.
If only one rear surround speaker
has been paired or if both are set
in the same channel, either “REAR
L” or “REAR R” is displayed.
“REAR LEVEL” is not indicated on
the display when “REAR
SPEAKER” is set to “OFF” or a
rear surround speaker is not linked
to this system.
NET SETUP
You can choose how to
connect to a network.
For details, refer to “Step 4
Network settings” (> 19)
NET INFO
You can confirm the IP
address allocated to this
system, the MAC address of
this system, and the network
name (SSID) of this system.
IP ADDR
MAC ADDR
SSID
Characters that cannot be
displayed are replaced with “ ”.
SIGNAL
LEVEL
You can check the signal
strength of the wireless
connection.
The signal strength is displayed
when you press [OK] while
“SIGNAL LEVEL” is being
displayed.
Press [OK] again to stop the
display.
It is recommended to have a
signal strength of “LEVEL 3”.
Change the position or angle of
your wireless network router or
this system if the indication is
“LEVEL 2” or “LEVEL 1” and see if
the connection improves.
If “LEVEL 0” is displayed, this
system cannot establish a link with
the wireless network router.
“WIRED LAN” is displayed when
connected with a LAN cable.
NET
STANDBY
This system can turn on
automatically from standby
mode when this system is
selected as the AllPlay/DLNA
speakers.
This function normally switches to
“ON” while this system is
connected to a network.
To turn off this function, select
“OFF” and then select a source
other than “NETWORK” before
switching this system to standby
mode.
ON
OFF
If this function is set to “ON” the
standby power consumption will
increase.
When the system is turned on by
this feature, the beginning part of
the music may not be played back.
Depending on the app, the
conditions for activating this
function may differ.
The system may not turn on even
when selected as the output
speakers. In that case, start
playback.
WIRELESS
LAN
The wireless LAN function
can be enabled or disabled.
ON
OFF
F/W VERSION
You can check the firmware
version.
The version of the installed
firmware is displayed when you
press [OK] while “F/W VERSION”
is being displayed.
Press [OK] again to stop the
display.
F/W UPDATE
You can update the firmware
of this system.
For details, refer to “Firmware
update” (> 32)
SC-ALL70T-SQT0935.book 31 ページ 2015年4月28日 火曜日 午前10時5分
31

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic SCALL70TGN bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic SCALL70TGN in de taal/talen: Engels als bijlage per email.

De handleiding is 2,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Panasonic SCALL70TGN

Panasonic SCALL70TGN Snelstart handleiding - English - 1 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info