612777
22
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
22
RQT0A22
The following messages or service numbers may
appear on the unit’s display.
“--:--”
You plugged the AC mains lead in for the first time or there was a
power failure recently. Set the time (l 17).
“ADJUST CLOCK”
Clock is not set. Adjust the clock accordingly.
“ADJUST TIMER”
Play timer is not set. Adjust the play timer accordingly.
“AUTO OFF”
The unit has been left unused for about 20 minutes and will shut
down within a minute. Press any button to cancel it.
“DL ERROR”
The software download has failed. Press any button to exit.
Please try again later.
The server cannot be found. Press any button to exit. Make sure
that the wireless network is connected to the Internet.
“ERROR”
Incorrect operation is performed. Read the instructions and try
again.
“F” / “F” (“ ” stands for a number.)
There is a problem with this unit.
Write down the displayed number, disconnect the AC mains lead
and consult your dealer.
“FAIL”
Updating or setting has failed. Read the instructions and try again.
“ILLEGAL OPEN”
Sliding door is in the wrong position. Turn the unit off and on
again. If this display appears again, consult the dealer.
“LEVEL 0”
There is no link between this system and the wireless router.
Try the following operations:
Check that the wireless router is turned on.
Turn this system off and on again.
Reset the wireless network settings. (l 7)
If the problem persists, consult your dealer.
“LINKING”
This system is trying to connect to the last connected Bluetooth
®
device when “BLUETOOTH” is selected.
This system is communicating with the wireless router to complete
the network settings.
Depending on the wireless router this process may take a few
minutes. Try moving this system closer to the wireless router.
“NETWORK INITIALIZING”
“SETUP IN PROGRESS, TRY AGAIN”
The system is carrying out an internal process.
Wait for approximately 3 minutes.
Do not disconnect the AC mains lead. Doing so may cause
malfunction.
“NO CONNECT”
This system cannot connect to the network.
Check the network connection. (l 7)
“NODEVICE”
The USB device is not inserted correctly. Read the instructions
and try again (l 6).
“NO DISC”
Insert the disc to be played (l 6).
“NO MEMORY”
There are no preset DAB+ stations to select. Preset some
channels. (l 14)
“NO PLAY
A CD that is not in CD-DA or MP3 format is inserted. It cannot be
played.
Examine the content. You can only play supported format. (l 24)
The files in the USB device can be corrupted. Format the USB
device and try again.
The unit may have a problem. Turn the unit off and then on again.
“NO SIGNAL”
This station cannot be received. Check your antenna (l 5).
“PLAYERROR”
You played an unsupported MP3 file. The system will skip that
track and play the next one.
“READING”
The unit is checking the CD/USB information. After this display
has disappeared, start operating.
“REMOTE ” (“ ” stands for a number.)
The remote control and this unit are using different codes. Change
the code on the remote control.
When “REMOTE 1” is displayed, press and hold [OK] and [ ]
for at least 4 seconds.
When “REMOTE 2” is displayed, press and hold [OK] and [CD/USB]
for at least 4 seconds.
“SCAN FAILED”
Stations are not receivable. Check your antenna and try Auto
scanning (l 14).
If “SCAN FAILED” is still displayed find the best signal reception
with the “MANUAL SCAN” tuning function. (l 15)
“USB OVER CURRENT ERROR”
The USB device is drawing too much power. Select a source other
than “USB”, remove the USB and turn the unit off.
“VBR”
The system cannot show the remaining play time for variable bit
rate (VBR) tracks.
“WAIT”
This is displayed, for example, when this unit is turning off.
This is flashing when the system is trying to enter a network
setting mode.
The network indicator “ ” blinks
This may occur when, for instance, the network connection is
interrupted.
Messages
SC-ALL5CD-EGEBGN~RQT0A22.book 22 ページ 2015年4月23日 木曜日 午後4時44分
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic SCALL5CDGN bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic SCALL5CDGN in de taal/talen: Engels als bijlage per email.

De handleiding is 5,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Panasonic SCALL5CDGN

Panasonic SCALL5CDGN Snelstart handleiding - English - 1 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info