Handleiding Panasonic SCAK220 (pagina 9 van 16) (Engels)

612683

Verklein

Vergroot

Pagina terug

1/16

Pagina verder

RQT7528

To recall a marked track number in the current disc

During play or stop

Press [MARKER] to recall a marker.

Play starts from the track recalled.

Note

•

“NO MARKER” indicates that the marker in the current disc is empty.

•

The marker memory is cleared when you open the CD tray.

•

For CD-DA, you cannot use this function during 1-RANDOM and

A-RANDOM play.

•

You cannot use this function during program mode.

INTRO function (Album scan)

MP3

You can find an album by listening to the first track of all albums in the

current disc for 10 seconds each.

Remote control only

Preparation: Press [:/J, CD] and then [L, CLEAR].

1 Press [INTRO].

INTRO function starts.

(INTRO function is cancelled after playing the first track in the

last album on the current disc.)

2 While your desired album is playing, press [

:/J, CD].

Play continues from the first track of the album.

To stop during the process, press [INTRO] or [L, CLEAR].

Title search function

MP3

You can search for your desired album/track with its keyword (part of

the title).

Album / track title search

Remote control only

Preparation: Press [:/J, CD] and then [L, CLEAR].

1 For album title search

Press [TITLE SEARCH]

once.

For track title search

Press [TITLE SEARCH]

twice.

2 Enter the characters of the keyword for the title.

(A see right: “Entering characters”)

Marking a track

MP3

You can mark one track each on the discs loaded so that you can

start play from them later.

Remote control only

To mark a track

1 During play or stop

Select your desired track.

(For MP3, refer to “Track skip play” on page 7.

For CD-DA, press the numbered buttons.

To select track 10 or over, press [

10] then the two digits.)

2 Hold down [MARKER] until “STORING” blinks on the

display.

The selected track is stored in the marker of the current disc.

Note

If a track is already stored in the marker, it will be replaced next time

you store a new track in the same marker.

3 Press [ENTER]

Title search starts.

The matched title is displayed.

: Blinks to indicate album title search mode.

: Blinks to indicate track title search mode.

To show the matched title again

Press [ENTER].

To show the next/previous search result

Press [f, 4/FF] (next) or [

g, REW/3]

(previous).

Press [

:/J, CD

] to start play from the album/track found.

For album search, play starts from the first track of the album.

(Search mode is cancelled.)

To cancel partway through

Press [L, CLEAR].

When there is no match for the searched keyword, the display shows

“NOT FOUND”.

Note

You cannot use title search function in program mode.

•

To add to the program

Do steps 2 and 3.

MP3

Do steps 2 ~ 4.

•

To clear the last track

Press [DEL].

•

To clear all tracks

Press [L, CLEAR].

While “CLEAR ALL” is blinking, press the button again to clear all tracks.

Note

•

You cannot program CD-DA together with MP3 tracks.

•

MP3

The program memory is cleared when you change a disc or

open the CD tray.

•

MP3

You cannot program more than one CD for MP3.

→

1 Press the numbered button to select the required character.

Characters allocated to the numbered buttons:

Numbered Characters

buttons

2 A B C 2

3 D E F 3

4 G H I 4

5 J K L 5

space

!”#$ %&’()∗+,– ./:;=?_ `

Numbered Characters

buttons

6 M N O 6

7 P Q R S 7

8 T U V 8

9 W X Y Z 9

You can search for “ < ” or “ > ” by entering “ ( ” or “ ) ”.

The characters change each time a numbered button is pressed.

For example, every time you press [2]:

→

The special characters will be displayed as below:

Entering characters

You can enter a keyword of up to 8 characters for album/track title

search. You can only enter upper case letters but the unit also searches

for lower case.

Remote control only

Characters Main unit display Characters Main unit display

”–

’=

(

)

∗

Some characters may not be displayed correctly due to the recording

format/software used.

2 Press [CURSOR ] to enter the character.

Repeat steps 1~2 to complete the keyword.

L Editing keywords

To move the cursor

Press [CURSOR ( or )].

Deleting a character

1. Move the cursor over the character to be deleted.

2. Press [DEL].

Editing a character

1. Move the cursor over the character to be edited.

2. Enter the correct character.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Panasonic SCAK220 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Panasonic SCAK220

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info