502244

Panasonic SC-PM02 Handleiding

2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
U
V
W
X
Y
Z
a
b
T
1
CONTROL GUIDE
E [PROGRAM] (2, 4)
[REPEAT] (2)
[PLAY MODE] (2, 4)
F [4/9, USB] (3, 8)
[4/9, CD] (2)
G [2/3], [5/6] (2, 4, 6)
H [RE-MASTER] (6)
I [BASS] ( 6)
J [R/T] (2, 5)
[Y/U] have the exact same functions as
those of [2/3] or [5/6].
[OK] (2, 5, 7)
K [DISPLAY] (2, 4)
L [AUTO PRESET] (4)
M [TUNE MODE] (4)
N [#, PLAY] (5)
O [CLOCK/TIMER] (5)
P [SLEEP] (5)
Q [AUTO OFF]
This function allows you to turn the unit off
(except in radio mode) after the unit is left
unused for about 30 minutes. “AUTO OFF” is
activated as the factory preset. Press twice to
cancel.
R Volume control [+/–, VOL
],
[+/–, VOLUME]
S [MUTE]
Mutes the sound. Press again to cancel.
“MUTE” is also cancelled when the volume is
adjusted or the unit is turned off.
T [MUSIC PORT], [MUSIC P.] (7 )
U [FM/AM] (4)
V [8] (2, 3)
W [D.BASS] (6)
X [PRESET EQ] (6)
Y [TREBLE] (6)
Z [SURROUND] (6)
a [INPUT LEVEL] (7)
b [FM MODE] (4)
c MUSIC P. (music port) jack (7)
d Display panel
e Remote control signal sensor
Aim the remote control at the remote control
signal sensor, avoiding obstacles, at a
maximum range of 7 m directly in front of the
unit.
f USB port,
(3)
g [BASS/TREBLE] (6)
h [x, OPEN/CLOSE] (2)
Refer to the numbers in parentheses for chapter
references.
A Standby/on switch [`], [1] (5, 8)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
B [DIMMER]
Dims the display panel. Press again to cancel.
C Numeric buttons [1 to 9, 0, ≧10]
To select a 2-digit number
example: 16: [≧10] ] [1] ] [6]
To select a 3-digit number
example: 226: [≧10] ] [≧10] ] [2] ] [2] ]
[6]
D [DEL] (2)
Basic play
1 Press [ x, OPEN/CLOSE] on the main unit
to open the tray.
The unit turns on, load a disc with the label
facing up.
Press [x, OPEN/CLOSE] again to close the
tray.
2 Press [4/9, CD] to start play.
Stop
playback
Press [ 8].
Pause play
Press [4/9, CD]. Press again to
resume play.
Skip tracks
Press [ 2/3] or [5/6].
Search
through
tracks
Press and hold [2/3] or
[5/6] during play or pause.
Skip album
Press [ R/T].
Play Mode function
Press [ PLAY MODE] to select the desired
mode.
1-TRACK
1TR
Play one selected track on the
disc.
Press the numeric buttons to
select the track.
1-ALBUM
1ALBUM
Play one selected album on the
disc.
Press [R/T] to select the album.
RANDOM
RND
Play a disc randomly.
1-ALBUM
RANDOM
1ALBUM RND
Play all tracks in one selected
album randomly.
Press [R/T] to select the album.
Program play
This function allows you to program up to 24
tracks.
1 Press [4/9, CD] and then [8].
2 Press [ PROGRAM].
3 Press the numeric buttons to select the
track.
Repeat this step to program other tracks.
4 Press [4/9, CD] to start play.
1 Press [4/9, CD] and then [8].
2 Press [ PROGRAM].
3 Press [R/T] to select the album.
4 Press [5/6] once and then the numeric
buttons to select the track.
5 Press [ OK].
6 Repeat steps 3 to 5 to program other
tracks.
7 Press [4/9, CD] to start play.
Cancel
program
mode
Press [PROGRAM] in the stop
mode.
Replay the
program
Press [PROGRAM] then
[4/9, CD] in the stop mode.
Check
program
contents
Press [2/3] or [5/6]
when “PGM” is displayed in
the stop mode.
To check while programming,
press [PROGRAM] twice after
“PGM” appears, then press
[2/3] or [5/6].
Clear the last
track
Press [ DEL] in the stop mode.
Clear all
programmed
tracks
Press [8] in the stop mode.
“CLR ALL” is displayed. Within
5 seconds, press the button
again to clear all tracks.
Note:
• The program memory is cleared when you open
the disc tray.
• To repeat program play or selected play mode,
press [ REPEAT]. Press again to cancel.
Checking the track information
You can view the information of the current track
from the display panel.
Press [ DISPLAY] during play or pause.
Note:
• This unit supports ver. 1.0 and 1.1 ID3 tags.
• Text data that is not supported will not be
displayed.
NOTE on CDs
• This unit can access up to 99 tracks.
• This unit can play MP3 fi les and CD-DA format
audio CD-R/RW that have been fi nalised.
• It may not be able to play some CD-R/RW due
to the condition of the recording.
NOTE on MP3s
• Files are treated as tracks and folders are
treated as albums.
• This unit can access up to 999 tracks,
255 albums and 20 sessions.
• Disc must conform to ISO9660 level 1 or 2
(except for extended formats).
• To play in a certain order, prefi x the folder and
fi le names with 3-digit numbers in the order you
want them to play.
Limitations on MP3 play
• If you have recorded MP3s on the same disc
as CD-DA, only the format recorded in the fi rst
session can be played.
• Some MP3s may not be played due to the
condition of the disc or recording.
• Recordings will not necessarily be played in the
order you recorded them.
4
FM/AM RADIO
Manual tuning
1 Press [ FM/AM] to select “FM” or “AM”.
2 Press [ TUNE MODE] to select “MANUAL”.
3 Press [ 2/3] or [5/6] to select the
frequency of the required station.
To tune automatically
Press and hold [2/3] or [5/6] until the
frequency starts changing rapidly.
• Auto tuning may be interrupted when there is
excessive interference.
• To cancel auto tuning, press [2/3] or
[5/6] once again.
To improve the sound quality
When “FM” is selected
Press [ FM MODE] to display “MONO”.
Press again to cancel.
• “MONO” is also cancelled if the frequency is
changed.
• Turn off “MONO” for normal listening.
When “AM” is selected
Press and hold [ TUNE MODE].
Each time you press and hold the button:
BP2
BP1
RDS broadcasting
This unit can display the text data transmitted by
the radio data system (RDS) available in some
areas.
Press [ DISPLAY] to display:
Note:
RDS displays may not be available if reception is
poor.
Station name
(PS)
]
Program type
(PTY)
]
Frequency
(FREQ)
Memory preset
30 FM and 15 AM stations can be preset.
Automatic presetting
1 Press [PLAY MODE] to select “CURRENT”
or “LOWEST” frequency.
2 Press [ AUTO PRESET] to start presetting.
Manual presetting
1 Press [TUNE MODE] to select “MANUAL”.
2 Press
[2/3] or [5/6]
to tune to the
required station.
3 Press [ PROGRAM].
4 Press the numeric buttons to select a
channel.
The station occupying a channel is erased if
another station is preset to that channel.
5 Repeat steps 2 to 4 to preset more stations.
Selecting a preset station
1 Press [TUNE MODE] to select “PRESET”.
2 Press
[2/3] or [5/6] to select the
channel.
Alternatively, press the numeric buttons to select
the channel.
AM allocation setting
(by main unit only)
This system can also receive AM broadcasts
allocated in 10 kHz steps.
Press and hold [FM/AM].
After a few seconds the display changes to a
fl ashing display of the current minimum frequency.
Release the button when the minimum frequency
changes.
• To return to the original step, repeat the above
steps.
• After changing the setting, previously preset
frequency will be cleared.
3
USB
The USB connectivity enables you to connect and
play MP3 tracks from USB mass storage device.
Preparation
Before connecting any USB mass storage device
to the unit, ensure that the data stored therein has
been backed up.
Do not use a USB extension cable. The USB
mass storage device connected via the cable will
not be recognised by this unit.
1 Reduce the volume and connect the USB
mass storage device to the USB port.
Hold the main unit when connecting or
disconnecting the USB mass storage device.
2 Press [ 4/9, USB] to start play.
Stop
playback
Press [ 8]. “RESUME” is
displayed.
The position is memorised.
Press [4/9, USB] to resume
play.
Press [8] again to clear the
position.
For other operations, they are similar as those
described in “DISCS”.
Compatible devices
Devices which are defi ned as USB mass storage
class:
• USB devices that support bulk only transfer.
• USB devices that support USB 2.0 full speed.
Supported formats
• Track must have the extension “.mp3” or “.MP3”.
• CBI (Control/Bulk/Interrupt) is not supported.
• A device using NTFS fi le system is not
supported. [Only FAT 12/16/32 (File Allocation
Table 12/16/32) fi le system is supported.]
• Depending on the sector size, some fi les may
not work.
• Maximum album: 255 albums
• Maximum track: 2500 tracks
• Maximum track in one album: 999 tracks
5
CLOCK AND TIMERS
Setting the clock
This is a 24-hour clock.
1 Press [ CLOCK/TIMER] to select “CLOCK”.
2 Within 10 seconds, press [R/T] to set the
time.
3 Press [ OK].
Note:
• Press [CLOCK/TIMER] to display the clock for
few seconds.
• Reset the clock regularly to maintain accuracy.
Using the sleep timer
This function enables you to turn off the unit
automatically after the set time.
Press [ SLEEP] to select your desired time.
30 MIN ] 60 MIN ] 90 MIN ] 120 MIN ] OFF
Press [SLEEP] to show the remaining time and
press [SLEEP] again to select your desired time.
Note:
• The play and sleep timer can be used together.
• The sleep timer always has priority. Make sure
not to overlap timer settings.
Using the play timer
You can set the timer to come on at a certain time
to wake you up
.
Turn the unit on and set the clock.
Prepare the music source you want to listen to;
disc, radio, USB or music port source and set the
volume.
1 Press [CLOCK/TIMER] to select
“ # PLAY 1”, “ # PLAY 2” or “ # PLAY 3”.
2 Within 10 seconds, press [R/T] to set the
starting time.
3 Press [OK].
4 Repeat steps 2 and 3 to set the fi nishing
time.
To activate the timer
5 Press [ #, PLAY] to turn on “ # PLAY 1”,
“ # PLAY 2” or “ # PLAY 3”.
6 Press [ `] to turn off the unit.
Change the
settings
Repeat steps 1 to 4 and 6
(Z see above).
Change the
source or
volume
1) Press [#, PLAY] twice to
clear timer indicator from the
display.
2) Make changes to the source
or volume.
3) Perform steps 5 and 6
(Z see above).
Check the
settings
Press [CLOCK/TIMER] to
select
“ # PLAY 1”, “ # PLAY 2”
or
“
# PLAY 3
”
.
Cancel
Press [#, PLAY] twice to clear
the timer indicator from the
display
.
Note:
• The timer will start at the preset time, with the
volume increasing gradually to the preset level.
• The unit must be in standby mode for the timer
to function.
6
SOUND ADJUSTMENT
Preset EQ Press [ PRESET EQ] to select
“HEAVY”, “SOFT”, “CLEAR”,
“VOCAL” or “FLAT”.
Bass or
Tre ble
1) Press [ BASS] or [ TREBLE]
(main unit: [
BASS/TREBLE
]) to
select “BASS” or “TREBLE”.
2) Press [2/3] or [5/6]
to adjust the level (–4 to +4).
Surround
sound
Press [ SURROUND] to select
“ON SURROUND” or
“OFF SURROUND”.
If interference in FM stereo
reception increases, cancel the
surround sound effect.
D.Bass Press [ D.BASS] to select
“ON D.BASS” or “OFF D.BASS”.
Re-master
Press [ RE-MASTER] to select
“ON RE-MASTER” or
“OFF RE-MASTER”.
7
OPTIONAL EQUIPMENTS
Avoid interfering with other
Panasonic equipment
Other Panasonic audio or video equipment may
start functioning when you operate the unit using
the supplied remote control.
To solely operate this system, synchronise the
main unit with its corresponding remote control to
operate in “REMOTE 2” mode.
1 Press and hold [ MUSIC P.] on the main unit
and [ 2 ] until “REMOTE 2” is displayed.
2 Press and hold [ OK] and [ 2 ] for at least
2 seconds.
To change the mode back to “REMOTE 1”, repeat
steps 1 and 2 by replacing [ 2
] with [ 1 ].
Portable audio equipment
Turn off the equalizer function (if there is any) of
the portable audio equipment before you plug into
the MUSIC P. jack. Otherwise, sound from the
speaker may be distorted.
1 Plug the audio cord into the MUSIC P. jack.
2 Press [ MUSIC PORT] (
main unit: [MUSIC P.]
)
and play the portable audio equipment.
To adjust the sound input level
Press [ INPUT LEVEL] to select “HIGH” or
“NORMAL”.
Note:
• Cords and the equipment are not included.
• For details, refer to the portable audio
equipment’s instruction manual.
2
DISCS
Remote control
Main unit
G
g
c
d
V
A
R
F
e
T
U
MUSIC P.
f
h
Top of unit
Headphones jack ( )
Plug type: Ø 3.5 mm stereo (not included)
• Avoid listening for prolonged periods of time to prevent hearing
damage.
• Excessive sound pressure from earphones and headphones can
cause hearing loss.
• Listening at full volume for long periods may damage the user’s
ears. Be sure to use the supplied or recommended headphones or
earphones.
8
TROUBLESHOOTING GUIDE
■ Common problems
No response when remote control buttons are
pressed.
• Check that the batteries are installed correctly.
Distorted sound or no sound.
• Turn the volume up.
• Turn off the unit, determine and correct the
cause. Turn the unit on again. It may be caused
by straining of the speakers through excessive
volume or power, and using the unit in a hot
environment.
A “humming” sound can be heard during play.
• An AC mains lead or fl uorescent light is near
the unit. Keep other appliances and cords away
from the unit.
■ Discs
Incorrect display or play will not start.
• You have not inserted the disc correctly; insert it
correctly.
• Disc may be dirty. Wipe it clean.
• Replace the disc if it is scratched, warped, or
non-standard.
• Condensation has formed: wait 1 to 2 hours for it
to evaporate.
■ Radio
A beat sound is heard.
• Turn off any television nearby or move the unit
away from any television.
• Switch to either BP 1 or BP 2 when in AM tuner
mode.
A low hum is heard during AM broadcast.
• Separate the antenna from other cables and
cords.
■ USB
No response when [
4/9
, USB] is pressed.
• Disconnect the USB device and then reconnect
it. Alternatively, turn the unit off and on again.
The USB drive or its contents cannot be read.
• The USB drive format or its contents is/are not
compatible with the system.
• The USB host function of this product may not
work with some USB devices.
• USB devices with storage capacity of more than
8 gigabytes may not work in some instances.
Slow operation of the USB device.
• Large fi le size or high memory USB fl ash drive
takes longer time to read.
“NO PLAY”
• Check the content.
• Only MP3 format fi les can be played.
• If there are more than 255 albums or folders
(audio and non-audio), some of the MP3 fi les
in these albums may not be read and played.
Transfer these music albums to another USB.
Alternatively, reformat the USB device and save
these music albums prior to saving the other
non-audio folders.
■ Unit displays
“F61” or “F76”
• Check and correct the speaker cords
connection.
If this does not fi x the problem, consult the dealer.
• Disconnect the USB device. Turn the unit off and
on again.
“ERROR”
• Incorrect operation performed. Read the
instructions and try again.
“ADJUST CLOCK”
• Clock is not set. Adjust the clock accordingly.
“ADJUST TIMER”
• Play timer is not set. Adjust the play timer
accordingly.
“AUTO OFF”
• The unit has been left unused for about
29 minutes and will turn off in a minute. Press
any button to cancel.
Memory reset (Initialisation)
When the following situations occur, refer to the
instructions below to reset the memory:
• There is no response when buttons are
pressed.
• You want to clear and reset the memory
contents.
To reset memory
1) Disconnect the AC mains lead. (Wait at
least 3 minutes before proceeding to
step 2.)
2) While pressing and holding down [1],
reconnect the AC mains lead.
“– – – – – – – –” appears on the display
panel.
3) Release [1].
All the settings are returned to the factory
preset.
You will need to reset the memory items.
Before requesting service, make the following checks. If you are in doubt about some of the check
points, or if the solutions indicated do not solve the problem, consult your dealer for instructions.
PM02_EB.indd 2PM02_EB.indd 2 6/24/2010 5:52:05 PM6/24/2010 5:52:05 PM
2

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Panasonic-SC-PM02

Zoeken resetten

  • voor mijn Panasonic SC-PMx2 heb ik geen afstandsbedining. Hoe kan ik de automatische zenderzoekloop instellen?

    Gesteld op 16-8-2024 om 16:02

    Reageer op deze vraag Misbruik melden

  • Dag, Wij willen andere boxjes aansluiten maar kunnen die dan wat zwaarder zijn dan 10 watt?
    Dank en vr groet Gesteld op 14-10-2022 om 12:30

    Reageer op deze vraag Misbruik melden

  • Ik heb ongemerkt het knopje links onder op de afstandsbediening (auto preset) ingedrukt nu liggen alle zenders door elkaar, hoe krijg ik dit hersteld ? Gesteld op 27-12-2020 om 12:11

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic SC-PM02 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic SC-PM02 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Panasonic SC-PM02

Panasonic SC-PM02 Gebruiksaanwijzing - Nederlands, Deutsch, Français, Italiano, Espanõl - 68 pagina's

Panasonic SC-PM02 Gebruiksaanwijzing - Polski - 48 pagina's

Panasonic SC-PM02 Gebruiksaanwijzing - Dansk, Svenska - 68 pagina's

Panasonic SC-PM02 Gebruiksaanwijzing - Suomi - 11 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info