696387
26
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
26
TQBM0479
Automatic input switching
When the following operations are performed, the
main unit will automatically change the input to
the corresponding source.
jWhen play starts on an HDMI connected
device.*
3
jWhen the TV input or the TV channel is
changed.
*3 If the speaker output setting on the TV is set to this
system, the TV and the main unit turn on automatically
(Power on link).
Power off link
When the TV is turned off, the main unit also turns
off automatically.
(This function does not work when
“BLUETOOTH” or “NETWORK” is the source.)
Automatic lip-sync function
(for HDAVI Control 3 or later)
Delay between audio and video is automatically
adjusted by adding time-lag to the audio output,
enabling you to enjoy smooth audio for the
picture.
It may take up to 8 seconds for sound to be output from this
unit after turning the TV (VIERA) on. You can reduce the
amount of time it takes for sound to be output by using an
optical digital audio cable. If you do so, reconnect the
HDMI cable to a non-ARC compatible HDMI terminal on
the TV (VIERA). (> 8)
The delay information is automatically set if the TV is
compatible to VIERA Link “HDAVI Control 3” or later and
the VIERA Link is set to on.
The setting causes a sound delay of approximately 0.04
seconds when connected to a Panasonic TV (VIERA) with
VIERA Link (HDMI) version 2 or earlier or a TV from
another manufacturer.
Reference
Troubleshooting
Before requesting service, make the following
checks. If you are in doubt about some of the
check points, or if the solutions indicated in the
following guide do not solve the problem, consult
your dealer for instructions.
The unit does not work.
Operations are not done properly.
1 Touch [Í/I] on the main unit to turn it off.
If the main unit still does not turn off, touch and hold
[Í/I] on the main unit for at least 5 sec. This will force
turn off the main unit. Alternatively, disconnect the AC
mains lead, wait for at least 3 minutes, then reconnect
it.
2 Touch [Í/I] on the main unit to turn it on.
(It may take some time for the main unit to be
turned on.)
Consult your dealer if the problem persists.
No power.
Unplug the AC mains lead for at least 3 minutes
before plug in again.
After turning the main unit on, if the main unit
immediately turns off, unplug the AC mains lead
and consult your dealer.
If the main unit does not turn on by turning on
TV (HDAVI Control), turn on the main unit
manually.
If the problem persists, refer to “HDMI” in
“Troubleshooting”.
If this system does not operate as
expected, returning the settings to the
factory preset may solve the problem.
To return to the factory preset.
1 Press [SETUP] repeatedly to select
“RESET” and then press [OK].
You can also press [4] or [3] repeatedly to select
the setup item.
2 Press [4][3] to select “OK?YES” and
then press [OK].
“RESET” blinks on the display. After the “RESET”
display goes out, “TV” is selected as the source for
this system.
The remote control code will return to
“REMOTE 1” when this system is returned to
the factory preset. To change the remote
control code, refer to “Remote control code”
(> 18).
General operation
SC-HTB900-EGEBGN-TQBM0479_eng.book 26 ページ 2019年10月15日 火曜日 午後3時12分
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic SC-HTB900 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic SC-HTB900 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Panasonic SC-HTB900

Panasonic SC-HTB900 Gebruiksaanwijzing - Nederlands, Deutsch, Français, Italiano, Espanõl - 164 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info