734654
23
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
Reference
Operations
TQBJ2019 23
Reference
Troubleshooting
Before requesting service, make the following
checks. If you are in doubt about some of the
check points, or if the solutions indicated in the
following guide do not solve the problem, consult
your dealer for instructions.
No power.
After connecting the AC mains lead, wait about
10 sec. before turning on the unit.
Unplug the AC mains lead for 10 sec. before
plug in again.
After turning the main unit on, if the main unit
immediately turns off, unplug the AC mains lead
and consult your dealer.
If the main unit does not turn on by turning on TV
(HDMI CEC), turn on the main unit manually.
The remote control does not work properly.
The battery is depleted. Replace it with a new
one. (8)
It is possible that the insulation sheet has not been
removed. Remove the insulation sheet. (
8)
It may be necessary to set the code of the
remote control again after changing the battery
of the remote control. (21)
Use the remote control within the correct
operation range. (8)
The main unit is automatically switched to
standby mode.
“Auto power down” function is on.
The main unit will automatically switch to standby
mode when no signal is input and no operation is
performed for approx. 20 minutes. Refer to page
21 to turn this function off.
HDMI CEC related operations no longer
function properly.
Check the setting on the connected devices.
jTurn on HDMI CEC function on the connected
devices.
jSelect this system as the speaker in the TV’s
HDMI CEC menu.
When the HDMI connections are changed, after
a power failure or after the AC mains lead has
been unplugged, HDMI CEC operations may
not function properly.
j
Turn on all the devices that are connected to the
TV with an HDMI cable and then turn the TV on.
jTurn off the HDMI CEC settings of the TV and
turn it on again. For details refer to the
operating instructions for the TV.
j
While the main unit and the TV are connected with
the HDMI cable, turn on the TV and then unplug
the main unit’s AC mains lead and plug it again.
Pairing cannot be done.
Check the Bluetooth® device condition.
The device cannot be connected.
The pairing of the device was unsuccessful or
the registration has been replaced. Try pairing
the device again. (18)
This system might be connected to a different
device. Disconnect the other device and try
pairing the device again.
The device is connected but audio cannot be
heard through this system.
For some built-in Bluetooth
®
devices, you have to set
the audio output to “SC-HTB688”, “SC-HTB498” or
“SC-HTB488” manually. Read the operating
instructions for the device for details.
The sound is interrupted.
The device is out of the 10 m communication range.
Bring the Bluetooth
®
device closer to the main unit.
Remove any obstacle between the main unit
and the device.
Other devices that use the 2.4 GHz frequency
band (wireless router, microwaves, cordless
phones, etc.) are interfering. Bring the
Bluetooth® device closer to the main unit and
distance it from the other devices.
If the above does not fix the problem, you may be
able to fix the problem by reconnecting the main
unit and the
Bluetooth
® device. (18)
To return to the factory preset.
1Turn on the main unit.
2Press [ -PAIRING] to select “ ”.
3Press and hold [Í/I] on the main unit for
more than 4 sec.
(All the indicators will blink until the system
restarts)
If this system does not operate as expected,
returning the settings to the factory preset
may solve the problem.
The remote control code will return to the code 1
when this system is returned to the factory
preset. To change the remote control code, refer
to page 21.
General operation
HDMI
Bluetooth®
SC-HTB488_688_EGEBGN_TQBJ2019.book 23 ージ 207年月8 水日 後57分
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic SC-HT498 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic SC-HT498 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info