602097
49
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
49
RQT9508
Sound Page
Card
iPod operations
Radio
Optional wireless system (SH-FX70)
No sound.
Low volume.
Distorted sound.
Cannot hear the desired audio
type.
Turn the volume up.
Turn the muting off.
Check connections to speakers and other equipment.
Select the corresponding source.
Press [AUDIO] to select the audio.
Ensure the speaker settings for your speakers are correct.
When “BD-Video Secondary Audio” is set to “On”, Dolby TrueHD, Dolby Digital Plus,
DTS-HD Master Audio and DTS-HD High Resolution Audio are output as Dolby Digital or
DTS Digital Surround.
Re-master will not work when a bitstream signal is output from the HDMI AV OUT terminal.
Audio may not be heard when more than 2 devices are connected with HDMI cables.
Reduce the number of connected devices.
To output audio to a device connected with an HDMI cable, set “HDMI Audio Output” to “On
in the Setup menu.
Depending on the connected equipment, the sound may be distorted if this unit is connected
with an HDMI cable.
The multi-channel audio from a device connected to the TV is not output in it’s original
multi-channel form.
If the device has an optical audio output terminal, connect the device to this unit’s
“OPTICAL 2(STB)” terminal.
19
19
9 to 14
17
20
41
38
39
12, 27
Humming is heard during play. An AC power supply cord or fluorescent light is near the main unit. Keep other appliances and
cables away from the main unit.
No surround sound. Press [SURROUND] to select a surround effect. 18
Cannot switch audio. There are discs for which audio cannot be changed because of how the disc was created.
When audio is output from the HDMI AV OUT terminal, you cannot switch the audio if “Dolby
D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” is set to “Bitstream”. Set “Dolby D/Dolby D +/
Dolby TrueHD” or “DTS/DTS-HD” to “PCM”.
38
No sound from the TV Press [EXT-IN] to select the corresponding source. 17
The capacity of the SD card
decreased.
When a BD-Video that supports the BD-Live is used, and an SD card is in the slot, data may
be written to the SD card. Erase the data by using “BD-Video Data Erase”, format the card or
use a new card.
22
Music on an SD card cannot be
played.
Data that can be played from an SD card are AVCHD, MPEG2 and JPEG data.
43
The contents of the card
cannot be read.
The card is not compatible or the contents on the card may be damaged.
Turn off and then turn on the unit again.
43
Cannot charge or operate. Check that the iPod is connected firmly.
The battery of the iPod is depleted. Charge the iPod, and then operate again.
30
Cannot display iPod videos/
photos on the TV.
Make sure that TV is connected to the VIDEO OUT terminal on this unit.
Operate the iPod menu to make the appropriate video/photo output settings for your TV.
(Refer to operating instructions for your iPod.)
10
The TV input channel
unintentionally changes to
HDMI input.
When the main unit is connected with an
HDAVI Control
” compatible TV and VIDEO IN is
selected for iPod video or photo playback, the TV input channel will automatically change to
the HDMI input channel when [START] is pressed.
Re-select the TV’s VIDEO IN input channel.
Distorted sound or noise is
heard. “ST” flickers or does not
light.
Adjust the position of the FM or AM antenna.
Use an outdoor antenna.
13
A beat sound is heard. Turn the TV off or move it away from the unit.
A low hum is heard during AM
broadcasts.
Separate the antenna from other cables.
No power. Ensure the AC power supply cord of the wireless system is connected properly.
The indicator on the wireless
system does not turn green
even though [I/D SET] is
pressed and pairing completed.
Turn the wireless system off and then back on.
The wireless link indicator
(e.g., [W1] ” or an indicator) is
flashing.
There is no link between the main unit and the wireless system. Turn the wireless system off
and then back on. Alternatively, turn the wireless system off, disconnect the AC power supply
cord, and then reconnect it.
The wireless link indicator
(e.g., [W1] ” or an indicator)
does not light.
Check that the main unit is turned on, and the wireless system is turned on.
Ensure that the digital transmitter is fully inserted into the slot of the main unit.
Ensure the surround sound setting on the main unit.
45
The wireless link indicator
keeps flashing between red
and green.
There is a power supply problem. Consult the dealer.
Reference
BT300.book 49 ページ 2009年6月12日 金曜日 午後12時13分
49

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic SC-BT303 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic SC-BT303 in de taal/talen: Engels als bijlage per email.

De handleiding is 15,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info