608312
6
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
RQT8572
6
Do not apply an unreasonable force to the net at the front of the
speaker unit. You cannot remove the front net.
You can carry out assembly work stably by placing the cushions in
the packing case beneath the speaker. Place the speaker with the
net side face downward.
Cushions used
Two left cushions (upper and lower) for the speaker units
One stand base cushion (left or right or top and bottom)
Speaker units
Method of setting cushions
Left cushions for speaker unit
Cushion for stand base
Be sure to spread a cloth, for example, on the floor to protect it from
damage.
After each task, tighten the screws securely.
Tighten the stand base mounting bolts and the height adjusting bolts
using the hexagonal wrench provided.
1.Install the stand base (provided) on the speaker
unit.
Fit the stand base onto the stand of the speaker unit.
Install the stand base using the four stand base mounting
bolts (provided).
Tighten the screws alternately, and finally tighten them hard.
2.Determine the height of the speaker, and tighten
the two height adjusting bolts.
The height of each speaker is set to MIN at the factory.
Adjust the height as shown in the figure above.
Adjust the height.
Loosen the two height adjusting bolts , and move the stand
base.
You can obtain a better sound effect by adjusting the height of the
speaker to suit the height of the plasma television, for example.
Height adjustment range: 1,183 mm (MIN) - 1,428 mm (MAX)
Height
Tighten the height adjusting bolts alternately, and finally
tighten them hard.
Assembly and Installation
Assembling the front and surround speakers (SB-FS100) as stand types
3.Connect the speaker cable (provided) to the ter-
minals .
Be sure to connect only positive (copper) wire to positive (+)
terminal and negative (silver) wire to negative () terminal.
Speaker cable (short, 4 m): For the front speaker
Speaker cable (long, 10 m): For the surround speaker
Turn the thumb nut in the loosening direction until the hole in
the terminal becomes visible, then insert the conductor from
the top of the terminal and re-tighten the thumb nut.
Slightly bend the tip of the conductor before inserting it.
Tighten the thumb nut when the conductor is protruding from the
hole in the terminal.
Never short-circuit positive (+) and negative () speaker wires.
4.Fix the cable to the bottom of the stand base.
Attaching a stabilizing wire
Example Nylon clamp Screw for nylon clamp
Wire (not included) Ring (not included)
Screw (not included)
Screw the wood screw into a thick and hard part of the wall.
The surface must be able to support over 45 kg (99 lb.).
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic SBTP100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic SBTP100 in de taal/talen: Engels, Frans als bijlage per email.

De handleiding is 0,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Panasonic SBTP100

Panasonic SBTP100 Gebruiksaanwijzing - Nederlands, Deutsch, English, Français, Italiano, Espanõl, Polski, Dansk, Svenska - 64 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info