16
VQT0N44
Notes
≥Do not disconnect USB connection cable while the
access light of the movie camera is on. It may
freeze the software or destroy the data in transfer.
Please refer to the operating instructions of movie
camera.
≥When the movie camera is switched to the
PC mode while it is connected to the personal
computer, the operation mode of the movie
camera cannot be switched. In this case,
disconnect the USB connection cable. Switch the
operation mode of the movie camera and
reconnect the cable.
(except for NV-GS17)
≥If the movie camera is used as a Web Camera, the
quality of the video to be exchanged will depend
on the Internet connection status.
≥In the WEB CAMERA mode, video (picture)
cannot be recorded onto a tape or a card.
≥In the WEB CAMERA mode, the audio may be
interrupted in the midway of communication
depending on the communication environment or
the performance of the personal computer.
≥If you connect the USB connection cable while you
operate a tape in the tape playback mode, the tape
will be stopped.
≥If you connect the USB connection cable in the
WEB CAMERA mode (tape recording mode), the
time code indication, the SP/LP indication, or icons
disappear.
≥In the WEB CAMERA mode (tape playback mode),
the operation icon is changed.
≥When the tape recording mode of the movie
camera is switched to the PC mode, a warning
message may be displayed. You may simply
ignore it. (except for NV-GS17)
≥When you are using Windows XP or Windows
2000, you may install or uninstall this software
after logging on by setting the user name to
Administrator or to a user name having equivalent
authority. (except for NV-GS21/17)
≥If the movie camera is used as a Web Camera
while virus checking software is running, the movie
camera’s operation may stop midway through. In
this case, exit the Windows Messenger, reconnect
the movie camera and restart the Windows
Messenger.
≥We recommend using AC adaptor as the power
source for the movie camera when connecting to
the personal computer. Data may be lost if the
battery power is lost while transferring.
≥Do not delete the folders in a card. The card may
not be recognized if deleted. (except for NV-GS17)
≥If you install the USB Driver or Video Stream
Driver while the USB connecting cable is being
connected, or if you don’t follow these operating
instructions, the movie camera will not be
recognized correctly. In this case, delete the driver
from [Device Manager] as described below,
uninstall the driver, and re-install it. (except for NV-
GS21/17)
1Set the movie camera to tape recording mode or
tape playback mode, connect it to the personal
computer, and delete [USB Video Device] (or
[Panasonic DVC DV Stream Device]) from
[Device Manager].
2If you use Windows 98SE, set the movie camera
to PC mode and delete [Panasonic DVC USB
Storage].
VQT0N44EB-ENG.book 16 ページ ２００４年１２月１３日 月曜日 午前１０時５３分
