46
COPY INHIBITED: Because the medium is
protected by a copy guard,
images cannot be recorded
correctly.
CAN NOT CHANGE MODE:
The Mode of the Movie Camera
can not be changed in the PC
connection Mode.
~~~~~~~~~~~~~~~~~
Notes and Hints
ª Selecting Remote Controller Modes
When 2 Movie Cameras are used simultaneously,
they can be operated individually by selecting
different Remote Controller Modes.
≥If the Remote Controller Mode of the Movie
Camera and that of the Remote Controller do not
match, [REMOTE] Indication is displayed.
Setup on the Movie Camera:
Set [REMOTE] on the [OTHER FUNCTIONS] Sub-
Menu to the desired Remote Controller Mode.
(l 14)
Setup on the Remote Controller:
[VCR1]: Press the [D] Button and [∫] Button
simultaneously.
[VCR2]: Press the [E] Button and [∫] Button
simultaneously.
≥When the battery in the Remote Controller is
replaced, the mode is automatically reset to
[VCR1] Mode.
ª Concerning the Power Supply
≥When the Movie Camera is used for a long time,
the Camera body becomes warm, but this is not a
malfunction.
≥If the [CHARGE] Lamp does not light up although
the Battery is attached to AC Adaptor, detach the
Battery and reattach it.
≥Battery CGP-D110 and CGP-D105 cannot be
charged with this AC Adaptor.
ª Inserting/Removing the Cassette
≥If a new Cassette is inserted, rewind to the
beginning of the tape before starting recording.
≥When inserting the cassette, make sure it faces in
the right direction and then push it in until it stops.
ª Alarm Sounds
When [BEEP SOUND] on the [OTHER
FUNCTIONS] Sub-Menu on the [CAMERA
FUNCTIONS] Main-Menu is set to [ON],
confirmation/alarm beeps are issued as follows.
1 Beep
≥When you start recording
≥When you switch the [VCR/OFF/CAMERA/
M-CARD] Switch from [OFF] to Camera Mode or
Card Recording Mode.
2 Beeps
≥When you pause recording
10 Beeps
≥If you perform a wrong operation before or during
recording
ª Recording
≥Before turning on the power, remove the Lens
Cap. If the Lens Cap is still attached when the
power is turned on, Automatic White Balance
Adjustment (l 56) may not function correctly.
ª Recording Check
≥For Recording Check, the recording speed mode
(SP/LP) must be the same as the mode used for
the recording. If different, playback images will be
distorted.
ª Photoshot
≥Photoshot Recording results in slightly inferior
image quality.
ª Progressive Photoshot Function
≥The still pictures are recorded at a slightly
rewound point from where you press the
[PHOTOSHOT] Button.
≥When you change to the Still Picture Mode, you
will hear a click. This is the sound of the iris closing
and not an indication of malfunction.
≥If you record still pictures in Progressive Photoshot
Mode when your Movie Camera is set to
Programme AE (l 24), the brightness of the
images may change.
≥When you set the following functions,
[PROGRESSIVE] will be set to [OFF].
≥Digital Effect Modes in [EFFECT] (l 28)
≥Digital Zoom [D.ZOOM] (l 21)
≥Image Stabilizer Function [SIS] (l 22)
≥When [PROGRESSIVE] is set to [ON], the shutter
speed cannot be adjusted to 1/750 s or faster.
(l 26)
ª Zoom In/Out Functions
≥When you are zooming on a faraway subject, a
sharper focus is achieved if the recording subject
is 1.7 metres or more away from the Movie
Camera.
